WenmarOpen by Wenmar Pro

Service bulletins for the 2019 GMC Yukon

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

939 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Transmission and driveline are shown. Show all

Bulletins, newest first
19-NA-1362022-12-06. Service bulletin. POWER TRAIN. This service bulletin provides a diagnostic procedure to aid in correcting a customer concern of a Howling, Whining/Whirring Noise, Shudder/Vibration and/or Grinding Noise While in 4HI, 4HI Auto and/or During Parking Lot Maneuvers in Auto Mode.
22-NA-2252022-12-03. Service bulletin. POWER TRAIN. This information advises the technician the difference between a welch cap leak and the output seal of the t-case or transmission leaking ATF causing the customers concern.
PIP5175E2022-11-21. Service bulletin. POWER TRAIN; ENGINE AND ENGINE COOLING. This Preliminary Information communication provides information to the technician about vehicles that may have a delayed engagement into drive, shudder at a launch, or the transmission is slipping when shifting into 1st, 2nd, 3rd or 4th gears. This may be due to loose stator support to pump cover bolts causing a leak at the stator support to pump cover gasket. Technician will check for the bolts to be loose. If any of the bolts are loose or the gasket is misaligned or leaking, the transmission pump cover must be replaced and the 1234 clutch plates should be inspected for being distressed and repaired as needed.
PIP58822022-11-21. Service bulletin. POWER TRAIN. This Preliminary information communicates diagnostic aid to help isolate possible repeat thermal by-pass valve concern.
PIP5429A2022-10-17. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN. This Preliminary Information communication advises the technician that the customer may experience a 2-3 slip or flare after the vehicle has been sitting for a period of time. Technician can update the Transmission Control Module if working on a model year 2007. On all other model years dealer should communicate to the customer this condition is a normal operating characteristic of their vehicle.
PIP5621C2022-10-17. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); POWER TRAIN. This Preliminary information communicates to the dealer technician that TAC recommends the utilization of the GDS2 software to aid in diagnosing automatic transmission concerns. TAC is requesting the GDS2 session logs be sent in before the dealer contacts TAC.
PIP5640A2022-10-17. Service bulletin. POWER TRAIN. This Preliminary Information communication provides information to the technician to not remove the torque converter bolts and start the engine as this may cause damage to the torque converter of the crankshaft on vehicles equipped with an automatic transmission.
22-NA-1852022-10-13. Service bulletin. POWER TRAIN. This informational bulletin explains how the trans slip or flare can be a normal condition.
15-00-89-004E2022-10-11. Service bulletin. POWER TRAIN; SUSPENSION; ENGINE AND ENGINE COOLING; SERVICE BRAKES, HYDRAULIC; STEERING. This service bulletin provides technicians with updated information to help identify the differences between what is considered a fluid leak, and what is considered fluid seepage.
06-00-89-031H2022-10-11. Service bulletin. POWER TRAIN; ENGINE AND ENGINE COOLING. This service bulletin provides information on OEM and Remanufactured Engine and Automatic Transmission/Transaxle Identification.
22-NA-1812022-09-19. Service bulletin. POWER TRAIN. This diagnostic tip advises the tech not to separate the flexplate from the torque convertor or damage my occur if the engine is started while diagnosing for noise from the engine or transmission.
22-NA-1762022-09-19. Service bulletin. POWER TRAIN; ENGINE AND ENGINE COOLING. This technical bulletin provides information on a possible bolt and guide pin that may be missing from the control valve which will need to be installed to correct the repair.
21-NA-1992022-08-30. Service bulletin. POWER TRAIN. This informational bulletin advises the technician to replace the TBV if the transmission has any type of repair even if no problem was found, to replace the tbv.
21-NA-1992022-08-04. Service bulletin. POWER TRAIN. This informational bulletin advises the technician to replace the TBV if the transmission has any type of repair even if no problem was found, to replace the tbv.
20-NA-1422022-07-01. Service bulletin. POWER TRAIN. This Technical bulletin provides a repair to correct a condition of Shudder/Surging While Driving.
20-NA-1422022-06-02. Service bulletin. POWER TRAIN. This Technical bulletin provides a repair to correct a condition of Shudder/Surging While Driving.
17-NA-0662022-06-01. Service bulletin. POWER TRAIN. This warranty administration bulletin provide policy information for automatic transmission Oil Cooler Flush and flow test.
183672022-05-31. Service bulletin. PARKING BRAKE; EQUIPMENT; AIR BAGS; POWER TRAIN:AUTOMATIC TRANSMISSION:INTERNAL:SHAFT:INPUT; POWER TRAIN. Customer Satisfaction. Certain vehicles, equipped with the 10-speed automatic transmission (RPO MF6), may have a condition in which the transmission manual shaft pin was not seated properly. If the shaft pin were to migrate out of position, the driver may find they cannot shift the vehicle into any gear other than the last one selected. The customer may be unable to return the vehicle back to park, in which case they would be required to engage the parking brake to ensure the vehicle does not roll from its intended position. Dealers will replace the transmission manual shaft pin. Private Message sent to select dealers.
20-NA-0502022-05-06. Service bulletin. POWER TRAIN. This technical bulletin provides a procedure to clear the codes and test the Tcase if found that the customer has tried to shift the t-case from 4lo to Hi gears while driving.
20-NA-2072022-03-16. Service bulletin. PARKING BRAKE:ELECTRICAL:CONTROL MODULE; ELECTRICAL SYSTEM; POWER TRAIN. This service bulletin informs the technician to inspect for a possible electrical concern at the ECM X2 electrical connector to correct a customer concern of Malfunction Indicator Lamp (MIL) Illuminated - DTC P0333 Set.
PIP5345A2022-02-14. Service bulletin. POWER TRAIN. This Preliminary Information communication provides information to the technician about being to achieve pre-load when setting up the pinion bearing pre-loads during reassembly of the 9.5/9.76 inch rear axles. Technician will need to use pinion gear install washer part number 11609638 onto the pinion shaft between the flange and nut. Tighten the pinion nut until you achieve 10 pound inch or 1.0 newton rotating torque. After the torque has been achieved back the nut off and remove the washer. Tighten the nut back down until you achieve 15 pound inch or 1.7 newton meters for used bearings or 20 pound inch 2.25 newton meters for new bearings.
21NA1992022-02-14. Service bulletin. POWER TRAIN; POWER TRAIN:AUTOMATIC TRANSMISSION:FLUID/LUBRICANT:VALVES/VALVE BODY. This informational bulletin advises the technician to replace the TBV if the transmission has any type of repair even if no problem was found, to replace the tbv.
PIP58112022-01-24. Service bulletin. ENGINE AND ENGINE COOLING; POWER TRAIN. This Preliminary information communicates to dealers an issue on remanufactured engines with part numbers 19368174 and 19368176 where the incorrect crankshaft timing gear was installed. Provides dealer with information to correct this condition.
19NA1532021-12-27. Service bulletin. POWER TRAIN; ENGINE AND ENGINE COOLING. This technical bulletin provides a procedure to replace the torque converter and inspect the front pump and the TEHCM for metal.
PIC5650J2021-09-13. Service bulletin. POWER TRAIN; AIR BAGS. This Preliminary Information communication provides information to the technician about vehicles that have an intermittent no crank, no start, or start stall concern with the security light coming on. Technician may find Diagnostic Trouble Codes B3055, B3060, and/or B3935. Technician should not replace any parts for this concern. If unable to duplicate the concern ask if the customer uses any Radio Frequency Identification Devices when the concern is present. Dealer should also direct their customers to the appropriate section in the Owner manuals that references that the device complies.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.