Service bulletins for the 2019 GMC Yukon
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
939 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
By topic
Only bulletins with component: Seats are shown. Show all
| PIT6180 | 2024-08-13. Service bulletin. SEATS. This Preliminary information communicates assistance in locating the Rear seat belt comfort guides in the parts catalog. |
|---|---|
| 06-00-89-029V | 2024-05-16. Service bulletin. SEATS; UNKNOWN OR OTHER. This service bulletin includes information on Interior Cleaning - Instrument Panel (IP), Hard or Plastic Surfaces, Seats, Carpet, Leather, Vinyl, Fabric Cleaner, Stain Remover, Restorer - Product Availability. |
| 17NA308 | 2021-12-20. Service bulletin. SEATS. This technical bulletin provides repair information to correct a customer concern of carpet damage, seat mounting stud wear through, hole in second row (Intermediate) carpet. |
| PIT5745 | 2020-08-10. Service bulletin. ELECTRICAL SYSTEM; SEATS. This Preliminary information communicates and issue with the memory seat module waking up the low speed GM lan bus and causing a battery draw. |
| 17NA308 | 2020-08-10. Service bulletin. EQUIPMENT; SEATS. This technical bulletin provides repair information to correct a customer concern of carpet damage, seat mounting stud wear through, hole in second row (Intermediate) carpet. |
| 060850009J | 2019-03-25. Service bulletin. SEATS; EQUIPMENT ADAPTIVE/MOBILITY. This informational bulletin provides information for information on passenger presence sensing system (PPS or PSS) concerns with custom upholstery, accessory seat heaters or other comfort enhancing devices. |
| PIT5284D | 2018-12-17. Service bulletin. SEATS. This Preliminary Information communication provides information to the technician on how to diagnose and repair vehicles that may have a rattle noise from the second row seat. Technician will need to inspect the striker not aligned properly in latch opening. To repair this condition, rework/adjust the striker in the direction to center it in the latch opening. An adjustable wide mouth metal working tool may be used to adjust the striker just enough to center in the latch opening. Technician may find a seat bottom latch may have an unequal latch opening side-to-side for the striker to seat into. To repair this condition, with the affected seat in the tumbled forward position, while applying steady, firm pressure, cycle the seat down into the latched position. Some vehicles built prior to 09/21/2015 with 60/40 Split Bench Seat may have 60-percent long side bench, inboard latch may not be properly aligned in striker opening. Technician will need to place a 2.6 mm thick flat washer over the 40 percent seat base stud, not the floor stud. Some vehicles may have a seat base plat that rattles against the rib in the floor pan. Apply Mylar tape to the floor pan under the seat plate to provide relief for the rattle condition. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.