WenmarOpen by Wenmar Pro

Service bulletins for the 2017 GMC Yukon

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

1580 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Transmission and driveline are shown. Show all

Bulletins, newest first
PIP5531A2020-02-10. Service bulletin. ENGINE; POWER TRAIN:AUTOMATIC TRANSMISSION. This Preliminary Information communication provides information to the technician on the steps need to diagnose and repair vehicles that may have stalling shudder and/or hard shifting into 1st gear or reverse vibration on launch (with excessive crankshaft end play). Technician will test to determine if the crank shaft end play is within specification 0.0015?0.0086 inch. If end play is found to be out of specification, remove engine and inspect for possible crankshaft thrust bearing and/or crankshaft for wear. Inspect thrust bearing for wear on one side and crankshaft on that "mating" surface. If the thrust bearing has three vertical channels worn off replace connecting rod bearings, main bearings, thrust bearing and crankshaft. If working on a Corvette the oil tank with lines and oil cooler are both required to be replaced if equipped
16NA0192019-12-16. Service bulletin. POWER TRAIN. Information on Transmission Adaptive Functions and Correcting Low Mileage Harsh Shifts, Slips, or Flares.
19NA1532019-12-16. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN. This technical bulletin provides a procedure to replace the torque converter and inspect the front pump and the TEHCM for metal.
PIP5621A2019-12-09. Service bulletin. POWER TRAIN. This Preliminary information communicates to the dealer technician that TAC recommends the utilization of the GDS2 software to aid in diagnosing automatic transmission concerns. TAC is requesting the GDS2 session logs be sent in before the dealer contacts TAC.
990420002K2019-11-25. Service bulletin. POWER TRAIN. This informational bulletin provides information on Driveline Clunk Noise and what is acceptable and what is considered normal operations.
16NA3612019-11-25. Service bulletin. POWER TRAIN. This informational bulletin explains possible normal condition of a flare from 1st to 2nd, even if the trans had been repaired for the flare and its still noticed.
16NA3382019-11-25. Service bulletin. POWER TRAIN. This Bulletin provides guidelines for Dealers Not Required and for Dealers Required to Contact the PQC for engine or transmission assembly replacement and explains the PQC process, GWM Transaction submission, vehicle service record retention and proper handling of assembly returns.
PIP56782019-10-15. Service bulletin. POWER TRAIN. This Preliminary information communicates to the dealer technician that if they are unable to perform the solenoid characterization using the transmission unit number (TUN) off a replacement 8L90 RPO M5U automatic transmission to refer to the TUNs listed in this PI. If the TUN off the replacement transmission is listed they should refer to bulletin 18-NA-355 and perform a transmission fluid exchange due to possible fluid contamination. The dealer technician is to call technical assistance after the fluid exchange to get the TUN unlocked so they will then be able to complete solenoid valve characterization procedure.
080730026F2019-09-23. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION. This informational bulletin provides information on Some vehicles may rock or move slightly forward or rearward while in Park at start up after cold soak. This condition may be accompanied by a clunk noise. This is a slight movement that is more often seen visually, rather than felt, when viewed from the outside and using the auto-start feature, if equipped.
19NA1532019-09-23. Service bulletin. POWER TRAIN. This technical bulletin provides a procedure to replace the torque converter and inspect the front pump and the TEHCM for metal.
19NA1532019-08-26. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:TORQUE CONVERTER; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. This technical bulletin provides a procedure to replace the torque converter and inspect the front pump and the TEHCM for metal.
19NA1422019-08-26. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; POWER TRAIN. This technical bulletin provides information for new transmission oil to use, a procedure for exchanging the old fluid and adding the new fluid to a service transmission.
PI1344C2019-08-19. Service bulletin. POWER TRAIN. This preliminary informational bulletin adds the 2016 model year to diagnostic tips and repair information to correct a customer concern of reduced acceleration at low speed and/or transmission slipping from a launch, DTC P0751 set.
18NA3552019-08-19. Service bulletin. POWER TRAIN. This technical bulletin provides information for new transmission oil to use and a procedure for exchanging the old fluid and adding the new fluid to correct a shake/shudder during light throttle acceleration condition.
16NA3382019-07-29. Service bulletin. POWER TRAIN. This Bulletin provides guidelines for Dealers Not Required and for Dealers Required to Contact the PQC for engine or transmission assembly replacement and explains the PQC process, GWM Transaction submission, vehicle service record retention and proper handling of assembly returns.
PIT5202E2019-07-08. Service bulletin. POWER TRAIN. This Preliminary Information communication provides information to the technician about vehicles that are equipped with 6L80 Regular Production Option Code (MYC), 6L90 Regular Production Option Code (MYD) or 8L90 Regular Production Option Code (M5U) Automatic Transmission, now have Powertrain Grade Braking. Powertrain grade braking assists when driving on a downhill grade to help maintain desired vehicle speed by using the engine and transmission to slow the vehicle.
080730035D2019-07-01. Service bulletin. POWER TRAIN. This bulletin provides information on the harmful effects of water or ethylene glycol in transmission fluid.
18NA3552019-07-01. Service bulletin. POWER TRAIN. This technical bulletin provides information for new transmission oil to use and a procedure for exchanging the old fluid and adding the new fluid to correct a shake/shudder during light throttle acceleration condition.
PIP5369C2019-06-03. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRICAL SYSTEM:SOFTWARE. This Preliminary Information communication provides information to the technician about vehicles that have "Service 4 Wheel Drive" message on the Driver Information Center. Provides the technician with additional information to ensure that the TCCM contains the latest software released to address previous issues, also advises of default action changes. Calls out specific circuits to be inspected to help isolate intermittent codes.
030729004L2019-05-20. Service bulletin. POWER TRAIN:MANUAL TRANSMISSION; EQUIPMENT. This informational bulletin provides normal operating characteristics and diagnostic information on Manual transmissions.
PIE0405A2019-05-13. Service bulletin. POWER TRAIN. This engineering informational bulletin is requesting information from the field on vehicles that have the condition of a Torque Converter Shudder.
18NA3552019-04-22. Service bulletin. POWER TRAIN. This technical bulletin provides information for new transmission oil to use and a procedure for exchanging the old fluid and adding the new fluid to correct a shake/shudder during light throttle acceleration condition.
17NA0662019-03-25. Service bulletin. POWER TRAIN; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. This warranty administration bulletin provide policy information for automatic transmission Oil Cooler Flush and flow test.
16NA3382019-03-18. Service bulletin. POWER TRAIN. This Bulletin provides guidelines for Dealers Not Required and for Dealers Required to Contact the PQC for engine or transmission assembly replacement and explains the PQC process, GWM Transaction submission, vehicle service record retention and proper handling of assembly returns.
16NA1752019-03-18. Service bulletin. POWER TRAIN. This technical bulletin provides a procedure to flush and drain fluids for the transmission to eliminate a shake and/or shudder during a light throttle acceleration between 40 and 128 KM/H (25 and 80 MPH) at a steady state.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.