WenmarOpen by Wenmar Pro

Service bulletins for the 2015 GMC Yukon XL

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

2156 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Transmission and driveline are shown. Show all

Bulletins, newest first
PIP52742018-06-04. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION. This Preliminary Information communication provides information to the technician about vehicles that may have Malfunction Indicator Lamp. Technician may find a Diagnostic Trouble Code P16F3 current or history in the Transmission Control Module. Technician should verify that the Diagnostic Trouble Code P16F3 is set in the Transmission Control Module. If the Diagnostic Trouble Code is set in the Transmission Control Module technician will need to contact General Motors Technical Assistance Center for further assistance.
PIP5250C2018-06-04. Service bulletin. POWER TRAIN:TRANSFER CASE (4-WHEEL DRIVE). This Preliminary Information communication provides information to the technician about vehicles that may have a Service 4WD message on the Driver Information Center when operated below 10 degrees Fahrenheit (-12 Celsius). Technician may find C0398 or C0326 stored in the Transfer Case Control Module. For vehicles with Regular Production Option Code NQH and NQ6 and only setting Diagnostic Trouble Codes C0398 or C0398 and C0326 the replacement of the actuator motor will correct the concern. Dealer will need to contact General Motors Product Quality Center for further assistance.
060089026N2018-06-04. Service bulletin. ELECTRICAL SYSTEM; VISIBILITY:SUN/MOON ROOF ASSEMBLY; STRUCTURE:BODY:DOOR; POWER TRAIN:TRANSFER CASE (4-WHEEL DRIVE); VISIBILITY:WINDSHIELD; ELECTRONIC STABILITY CONTROL (ESC). This warranty bulletin provides labor operation numbers for customer concerns that cant be duplicated.
16NA1752018-06-04. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION. This technical bulletin provides a procedure to flush and drain fluids for the transmission to eliminate a shake and/or shudder during a light throttle acceleration between 40 and 128 KM/H (25 and 80 MPH) at a steady state.
080730026E2018-06-04. Service bulletin. POWER TRAIN. This informational bulletin provides information on Some vehicles may rock or move slightly forward or rearward while in Park at start up after cold soak. This condition may be accompanied by a clunk noise. This is a slight movement that is more often seen visually, rather than felt, when viewed from the outside and using the auto-start feature, if equipped.
040730013D2018-06-04. Service bulletin. POWER TRAIN; ENGINE; EQUIPMENT. This informational bulletin provides information to dealership personnel on automatic transmission shift and engine drivability concerns and/or MIL ON due to aftermarket oil bath air filter use.
12-07-30-001C2018-05-29. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; POWER TRAIN; ENGINE. This informational bulletin provides a process to the service agents that are not required to contact PQC, to determine when to replace a assembly as opposed to repairing and if an engine or transmission is being returned, that it has all the information in relation to that part being returned.
PIP4112R2018-05-21. Service bulletin. EQUIPMENT; POWER TRAIN; ENGINE. This Preliminary Information communication provides information to the technician of a complaint of a sag or hesitation when accelerating. The concern is present when coasting at low speeds of less than 15 miles per hour and then aggressively applying the throttle, or after making a hard stop followed by an aggressive throttle. This is considered normal operation of the vehicle the throttle is delayed and opened slowly up to .7 seconds to help minimize driveline lash and clunking or will have approximately .5 seconds of zero torque to allow the transmission to shift to first gear.
14-07-30-001E2018-05-21. Service bulletin. EQUIPMENT; POWER TRAIN:MANUAL TRANSMISSION. This informational bulletin provides technicians with information to assist in identifying operating characteristics of manual transmissions that repair attempts will not change.
03-07-29-004J2018-05-21. Service bulletin. POWER TRAIN:MANUAL TRANSMISSION. This informational bulletin provides technicians with information to assist in identifying operating characteristics of manual transmissions that repair attempts will not change.
17-NA-0662018-05-21. Service bulletin. POWER TRAIN. This warranty administration bulletin provide policy information for automatic transmission Oil Cooler Flush and flow test.
16-NA-3612018-05-21. Service bulletin. EQUIPMENT; POWER TRAIN:AUTOMATIC TRANSMISSION. This informational bulletin explains possible normal condition of a flare from 1st to 2nd, even if the trans had been repaired for the flare and its still noticed.
16-NA-0142018-05-21. Service bulletin. EQUIPMENT; POWER TRAIN:AUTOMATIC TRANSMISSION:FLUID/LUBRICANT. Delayed Engagement After Sitting With Engine Off - Torque Converter Fluid Drain Back
12-07-30-001D2018-05-21. Service bulletin. POWER TRAIN; ENGINE. This informational bulletin provides a process to the service agents that are not required to contact PQC, to determine when to replace a assembly as opposed to repairing and if an engine or transmission is being returned, that it has all the information in relation to that part being returned.
02-07-30-029W2018-05-21. Service bulletin. ENGINE AND ENGINE COOLING; POWER TRAIN:AUTOMATIC TRANSMISSION. This informational bulletin provides information to the technician on what parts of an engine or transmission will require the PQC to be notified.
02-07-30-029V2018-05-21. Service bulletin. POWER TRAIN; ENGINE AND ENGINE COOLING; EQUIPMENT. This informational bulletin provides information to the technician on what parts of an engine or transmission will require the PQC to be notified.
PI0938A2018-05-21. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION. This preliminary bulletin provides information on what labor operation number to use for various electrical/electronic control issues.
17-NA-0662018-05-21. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION. This warranty administration bulletin provide policy information for automatic transmission Oil Cooler Flush and flow test.
080730035C2018-05-21. Service bulletin. POWER TRAIN. This bulletin provides information on the harmful effects of water or ethylene glycol in transmission fluid.
060089031E2018-05-21. Service bulletin. ENGINE; POWER TRAIN:AUTOMATIC TRANSMISSION. This informational bulletin provides information on OEM and Remanufactured Engine and Automatic Transmission/Transaxle Identification.
16NA3382018-05-21. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION; ENGINE. This Bulletin provides guidelines for Dealers required to contact the PQC for engine or transmission assembly replacement and explains the PQC process, GWM Transaction submission, vehicle service record retention and proper handling of assembly returns.
PI1344B2018-05-21. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION. This preliminary informational bulletin adds the 2016 model year to diagnostic tips and repair information to correct a customer concern of reduced acceleration at low speed and/or transmission slipping from a launch, DTC P0751 set.
PIP5200B2018-05-07. Service bulletin. POWER TRAIN. This Preliminary Information communication advises the technician that the 8L90 8 Speed Automatic Transmission is on exchange through General Motors Product Quality Center. Dealer will need to contact General Motors Product Quality Center for further assistance.
16NA3382018-05-07. Service bulletin. POWER TRAIN. This Bulletin provides guidelines for Dealers to determine whether or not they need to contact the PQC for an engine, transmission or transfer case assembly replacement and information explaining the PQC process, Global Warranty Management Transaction submission, vehicle repair record retention and proper handling of assembly returns.
GCUS-3-3112018-05-07. Service bulletin. ENGINE AND ENGINE COOLING; POWER TRAIN. 15396B - Service Update (Parts Information revised). This bulletin provides a service procedure to install the original design temperature-sensor wiring harness to the valve body on certain 2015 model year Cadillac Escalade and Escalade ESV; Chevrolet Silverado; and GMC Sierra, Yukon, and Yukon XL vehicles, equipped with a 6.2L engine (L86) and 8-speed automatic transmission (M5U). The supplier of the transmission-wiring harness introduced an unapproved change to the temperature sensor (thermistor), resulting in incorrect oil-temperature readings during transition from cold to warm temperatures. This could cause a harsh shift when starting the vehicle at temperatures below 32ºF (0ºC); however, shift quality improves once the transmission oil warms up.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.