WenmarOpen by Wenmar Pro

Service bulletins for the 2015 GMC Yukon XL

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

2156 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Driver assistance are shown. Show all

Bulletins, newest first
15NA082B2024-02-12. Service bulletin. BACK OVER PREVENTION. Clunking Noise from Front of Vehicle During Turns and/or Bumps
15NA0822024-02-12. Service bulletin. BACK OVER PREVENTION. Clunking Noise from Front of Vehicle During Turns and/or Bumps
1406040042023-12-11. Service bulletin. BACK OVER PREVENTION; ENGINE AND ENGINE COOLING. Various Engine Noises During Cold Start and Warm Engine Operation
PIP5395G2023-08-21. Service bulletin. BACK OVER PREVENTION; FUEL SYSTEM, GASOLINE. This Preliminary Information communication provides information to the technician on how to diagnose and repair vehicles that may have rattle or ticking noise that is louder inside the vehicle than outside. The noise may also sound like a lifter tick. If the noise is heard best at the fuel line and the sound will be real loud with a stethoscope. The fuel line will need to be replaced.
070601016G2022-06-13. Service bulletin. BACK OVER PREVENTION. This informational bulletin provides information on Internal Engine Noise or Damage After Oil Filter Replacement.
PI1187C2021-09-07. Service bulletin. FORWARD COLLISION AVOIDANCE: SENSING SYSTEM: CAMERA; BACK OVER PREVENTION; VISIBILITY:REARVIEW MIRRORS/DEVICES:INTERIOR. Information on Inside Rear view Mirror and Camera Loose
PI1187C2021-04-21. Service bulletin. VISIBILITY:REARVIEW MIRRORS/DEVICES; ELECTRICAL SYSTEM:ADAS:DRIVER MONITORING:CAMERA/SENSOR. Information on Inside Rear View Mirror and Camera Loose Some customers may comment that the inside rear view mirror or front camera is loose or that the mirror/camera mounting bracket is loose or has fallen off. If a vehicle is encountered with the above condition, do not attempt to reinstall the bracket onto the windshield. The above listed vehicles have a revised bracket design that is not serviceable. It is necessary to replace the windshield glass assembly. The bracket comes installed on the new glass assembly. Refer to Windshield Replacement in SI.
150601002I2020-04-27. Service bulletin. BACK OVER PREVENTION; ENGINE. This technical bulletin provides a procedure to repair the valve lifter oil manifold and/or lifters to correct the customers concern of engine misfire, ticking noise and/or MIL Illuminated.
PIP5298B2019-06-10. Service bulletin. ELECTRICAL SYSTEM; TRACTION CONTROL SYSTEM; ENGINE. This Preliminary Information communication provides information to the technician for a Service Engine Soon light with a Diagnostic Trouble code P0300 set. There may be a rough running engine associated with this concern. If service information diagnostics have been completed and there is still no trouble found, the technician is to inspect for a possible terminal tension concern on the ignition coil power feed for the cause of the rough running engine and or the P0300. For the Service Engine Soon light or traction control lamp concern check the X2 connector of the under hood fuse block for poor pin retention.
18NA3602019-03-25. Service bulletin. LANE DEPARTURE: SENSING SYSTEM: CAMERA; VISIBILITY. This technical bulletin provides a procedure to replace the side mirror cameras if found the cause of the reduced key fob range.
PIT5552C2019-03-11. Service bulletin. BACK OVER PREVENTION: SENSING SYSTEM: CAMERA. This Preliminary information communicates repair information for the rear vision camera or surround vision camera image being: - Yellow - Blurry - Distorted - Image scrolling - Image with NO gridlines - Screen is blue with gridlines - Screen is blue with Service Rear Vision System message
PIP5298A2018-12-17. Service bulletin. TRACTION CONTROL SYSTEM; ENGINE. This Preliminary Information communication provides information to the technician for a Service Engine Soon light with a Diagnostic Trouble code P0300 set. There may be a rough running engine associated with this concern. If service information diagnostics have been completed and there is still no trouble found, the technician is to inspect for a possible terminal tension concern on the ignition coil power feed for the cause of the rough running engine and or the P0300. For the Service Engine Soon light or traction control lamp concern check the X2 connector of the under hood fuse block for poor pin retention.
PI0938A2018-06-11. Service bulletin. ELECTRICAL SYSTEM; ELECTRONIC STABILITY CONTROL (ESC). This preliminary bulletin provides information on what labor operation number to use for various electrical/electronic control issues.
060089026N2018-06-04. Service bulletin. ELECTRICAL SYSTEM; VISIBILITY:SUN/MOON ROOF ASSEMBLY; STRUCTURE:BODY:DOOR; POWER TRAIN:TRANSFER CASE (4-WHEEL DRIVE); VISIBILITY:WINDSHIELD; ELECTRONIC STABILITY CONTROL (ESC). This warranty bulletin provides labor operation numbers for customer concerns that cant be duplicated.
PI1126F2018-06-04. Service bulletin. BACK OVER PREVENTION; EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM); EQUIPMENT:ELECTRICAL; BACK OVER PREVENTION: SENSING SYSTEM: CAMERA. This preliminary informational bulletin provides repair information to correct customer concerns about blank screen after startup and reverse, rear view camera message on, touch screen inoperable, Bluetooth and navigation concerns.
17NA3752018-06-04. Service bulletin. BACK OVER PREVENTION: SENSING SYSTEM: CAMERA. This informational bulletin provides a diagnostic tip for rear vision camera image that is grainy, distorted and/or pixelated
PI1126G2018-05-21. Service bulletin. EQUIPMENT:ELECTRICAL; BACK OVER PREVENTION: SENSING SYSTEM: CAMERA. This preliminary informational bulletin provides repair information to correct customer concerns about blank screen after startup and reverse, rear view camera message on, touch screen inoperable, Bluetooth and navigation concerns.
PI14542018-05-07. Service bulletin. BACK OVER PREVENTION; VISIBILITY:POWER WINDOW DEVICES AND CONTROLS. This preliminary informational bulletin provides repair information for a customer concern of intermittent clicking/rubbing noise when side door glass is moving up or down at cold temperatures.
150601002E2018-05-07. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE; BACK OVER PREVENTION. This technical bulletin provides a procedure to repair the valve lifter oil manifold and/or lifters to correct the customers concern of engine misfire, ticking noise and/or MIL on.
080730026D2018-05-07. Service bulletin. ELECTRONIC STABILITY CONTROL (ESC). This informational bulletin provides information on Some vehicles may rock or move slightly forward or rearward while in Park at start up after cold soak. This condition may be accompanied by a clunk noise. This is a slight movement that is more often seen visually, rather than felt, when viewed from the outside and using the auto-start feature, if equipped.
14-06-04-004A2018-05-07. Service bulletin. ENGINE AND ENGINE COOLING; BACK OVER PREVENTION. This information bulletin provides additional information to the technician on how to diagnose possible normal engine noise during a cold star and a warm engine operation.
16-NA-1072018-04-23. Service bulletin. EQUIPMENT:ELECTRICAL; EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.; BACK OVER PREVENTION: SENSING SYSTEM: CAMERA. This technical bulletin provides a procedure to reprogram the radio to correct a customer concern of radio Inoperative, blue Screen, AM clipping noise, HD on/off status not retained in stations, time lag on transitions, no audio with internal amp, and park assist symbol position wrong in rear view camera.
PIT5277B2018-01-22. Service bulletin. BACK OVER PREVENTION: CAMERA SYSTEM; ELECTRICAL SYSTEM:SOFTWARE. This Preliminary Information communication provides information to the technician on the steps to diagnose and repair vehicles that may have intermittent and hard to duplicate Rear Camera blank, distorted, or fuzzy. Also no radio, OnStar, or speech audio and the volume is unable to be adjusted from the integrated center stack or the steering wheel controls. The driver information center will show ?No Audio? in Audio mode. Technician will need to inspect X275 and X225 for bent terminals, terminals backing out of the connector, or terminals contacting another terminal behind each side of the connector and repair as necessary.
PIT5277A2017-12-22. Service bulletin. BACK OVER PREVENTION; EQUIPMENT; ELECTRICAL SYSTEM. This Preliminary Information communication provides information to the technician on the steps to diagnose and repair vehicles that may have intermittent and hard to duplicate Rear Camera blank, distorted, or fuzzy. Also no radio, OnStar, or speech audio and the volume is unable to be adjusted from the integrated center stack or the steering wheel controls. The driver information center will show ?No Audio? in Audio mode. Technician will need to inspect X275 and X225 for bent terminals, terminals backing out of the connector, or terminals contacting another terminal behind each side of the connector and repair as necessary.
PIT5398A2017-08-15. Service bulletin. STEERING; ELECTRICAL SYSTEM; LANE DEPARTURE. This Preliminary Information communication provides information to the technician about vehicles that may have the rear vision camera system displaying "Rear Park Assist Symbols Unavailable" and the steering grid lines displayed do not show. If the vehicle is in reverse, the rear vision camera will display "Rear Park Assist Symbols Unavailable" and does not have Regular Production Option Code UD5 or UD7 the radio must be updated using Service Programming System to correct this concern. Some vehicles may not show steering guide/grid lines displayed in the Rear Vision Camera display. Dealer should communicate to the customer that steering guide/grid lines are not available with this base radio Regular Production Option Code (IO3). Some vehicles while in reverse and the rear park assist system detects an object, the warning triangle symbol is displayed on the wrong side of the radio display. Engineering is aware of the issue and updated radio/tuner calibrations will be released shortly.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.