WenmarOpen by Wenmar Pro

Service bulletins for the 2015 GMC Sierra

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

3109 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Bulletins, newest first
17-NA-1702017-12-22. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. This informational bulletin explains the Road Force balancers and what they can do for customer concerns.
16-NA-3612017-12-22. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. This informational bulletin explains possible normal condition of a flare from 1st to 2nd, even if the trans had been repaired for the flare and its still noticed.
15-NA-0022017-12-22. Service bulletin. FUEL SYSTEM, DIESEL. This bulletin provides repair information to correct a customer concern of fuel odor, fuel leaks from UH SIDI Pipes between High Pressure Pump and Fuel Rails
11-08-49-001V2017-12-22. Service bulletin. ELECTRICAL SYSTEM:12V/24V/48V BATTERY. This technical bulletin provides information on Transport Mode On Message Displayed in Driver Information Center (DIC) and/or Battery Light is Flashing and the procedures to turn the transport mode message on and off.
06-03-09-004I2017-12-22. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. This technical bulletin provides a procedure to apply grease to the leaf springs to correct a condition of a squeak noise from the metals making contact.
04-00-89-015P2017-12-22. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. This warranty administration bulletin provide policy information on required operating procedures.
00-06-01-026H2017-12-22. Service bulletin. ENGINE. This informational bulletin provides information on intake manifold inspection/replacement after severe internal engine damage.
16-NA-2232017-12-22. Service bulletin. SERVICE BRAKES. This informational bulletin provides information on installing the correct tires for vehicles with the condition of under hard acceleration at higher speeds, the traction control light will flash. Or, they may come in for ABS or general handling/braking concerns.
GCUS-3-5672017-12-22. Service bulletin. TRAILER HITCHES. 15809 - Service Parts Customer Satisfaction Program - Certain Chevrolet Silverado LD and GMC Sierra LD model vehicles equipped with the 12,000 lb. trailering package (RPO Z82) may have been serviced with, or the customer sold over the counter, a trailer hitch platform that could develop cracks at the weld points over time. With heavy towing loads over thousands of miles, these cracks could potentially propagate and fatigue the welds. If the trailer hitch platform welds fatigue while the vehicle is being operated with a trailered load, that trailer could become unsecured. Trailer Hitch Platforms involved in this program were sold over the counter or used to repair various serviced vehicles. For information on involved vehicles manufactured with the identified trailer hitch platforms refer to the latest version of Customer Satisfaction Bulletin 15036.
GCUS-3-5662017-12-22. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. 15801A - Customer Satisfaction Program. This bulletin is being revised to add a note at the beginning of the Service Information section. The 2016 model year GMC Sierra HD vehicle, and an increase in population has also been added. Vehicles equipped with Duramax Diesel Engine (RPO LGH or LML) and Ambulance Upfitter or Fire Truck Upfitter (RPO YF2 or ANM), may have a condition in which the emission control system as designed will limit speed under certain conditions. The EPA has approved General Motor?s request to remove the emission control system speed limitations on these emergency vehicles where applicable. Dealers are to reprogram the Engine Control Module (ECM) with new calibration for emergency vehicles, which will remove the emission control system speed limitations, and also provide an earlier warning for Diesel Particulate Filter (DPF) regeneration.
GCUS-3-5532017-12-22. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE; ENGINE. 15801 - Customer Satisfaction Program. (2012 model year repair suspended) Vehicles equipped with Duramax Diesel Engine (RPO LGH or LML) and Ambulance Upfitter or Fire Truck Upfitter (RPO YF2 or ANM), may have a condition in which the emission control system as designed will limit speed under certain conditions. The EPA has approved General Motor?s request to remove the emission control system speed limitations on these emergency vehicles where applicable. Dealers are to reprogram the Engine Control Module (ECM) with new calibration for emergency vehicles, which will remove the emission control system speed limitations, and also provide an earlier warning for Diesel Particulate Filter (DPF) regeneration.
GCUS-3-5472017-12-22. Service bulletin. TIRES. 29110 - Customer Satisfaction Program. (Customer Letter Mailing) Certain 2014-2016 model year Chevrolet Silverado and GMC Sierra model vehicles equipped with a full size spare tire and road wheel (SEO 00A) may have been built without a Tire Pressure Monitoring (TPM) sensor installed in the spare tire. If the spare tire was to be used and the TPMS programmed to coordinate with the wheels in use, a tire pressure monitor system error would be displayed due to the lack of a sensor in the spare tire. Dearler are to add a sensor to the spare tire.
PIP51982017-12-22. Service bulletin. ENGINE AND ENGINE COOLING; FUEL SYSTEM, GASOLINE. This Preliminary Information communication provides information to the technician about vehicles that may have Service messages in the Driver Information Center, Malfunction Indicator Lamp on, Erratic fluctuating engine oil pressure gauge, engine crank no start, and engine may run rough or misfire. Technician may find Diagnostic Trouble Codes. Technician should use published Service Information diagnostics for the Diagnostic Trouble Codes that are set. If the diagnosis does not lead to a resolution check for chafing of the engine wiring harness that is routed near the Exhaust Gas Recirculation Valve. Technician should repair any damaged wiring and fully seat the wire retaining harness. Also the technician should bend the Exhaust Gas Recirculation Valve gasket over to prevent a re-occurrence.
PIP5137C2017-12-22. Service bulletin. POWER TRAIN. This Preliminary Information communication provides information to the technician about vehicles that may have a rough idle and/or a vibration at idle in gear. Technician will need to try centering the engine and transmission mount. For vehicles built before 07/01/2013 if no change the shim to the right engine mount 2 most inner bolts 3mm.
PIT4250G2017-12-22. Service bulletin. EQUIPMENT; STRUCTURE. This Preliminary Information communication provides information to the technician about vehicles that have water or dust from the openings under the bed rails near the stake pockets. Dealer should communicate to the customer this condition is a normal operating characteristic of their vehicle.
PIP5151B2017-12-22. Service bulletin. FUEL SYSTEM, GASOLINE; ELECTRICAL SYSTEM. This Preliminary Information communication provides information to the technician about vehicles that may have a hard start, no start, rough running, or low fuel pressure. Technician may find Diagnostic Trouble Codes P0087, P0088, P0191 and P128E during the inspection. If during the inspection of the fuel system contamination is found the complete fuel system will need to be cleaned and flushed. After the fuel system is cleaned out test the fuel using the latest version of PIT3173.
PIP5085A2017-12-22. Service bulletin. ELECTRICAL SYSTEM. This Preliminary Information communication provides information to the technician about vehicles that may have Malfunction Indicator Lamp on. Technician may find Diagnostic Trouble Code P0420, P24A0 and or P2463. Technician should follow published Service Information diagnostics for the Diagnostic Trouble Codes that are set. If the diagnostic leads to diagnosis or replacement of the Q57 Indirect Exhaust After-treatment Fuel Injector, document all of your test results. If Diagnostic Trouble Codes P0420, P24A0 and/or P2463 are found, inspect the inlet and outlet of the Diesel Oxidation Catalyst for signs of damage, if damage is found replace the Diesel Oxidation Catalyst.
PIP4112P2017-12-22. Service bulletin. ENGINE; POWER TRAIN. This Preliminary Information communication provides information to the technician of a complaint of a sag or hesitation when accelerating. The concern is present when coasting at low speeds of less than 15 miles per hour and then aggressively applying the throttle, or after making a hard stop followed by an aggressive throttle. This is considered normal operation of the vehicle the throttle is delayed and opened slowly up to .7 seconds to help minimize driveline lash and clunking or will have approximately .5 seconds of zero torque to allow the transmission to shift to first gear.
PIT52982017-12-22. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM. This Preliminary Information communication provides information to the technician on installing Regular Production Option Code 9L7 Up-fitter Auxiliary Switches. Technician will need to reference the latest version of General Motors Up-fitter Integration Bulletin 110. The information can be found at http://www.gmupfitter.com/ under the "Technical Bulletin" Tab and then "Show all bulletins."
PIP4379M2017-12-22. Service bulletin. POWER TRAIN; FUEL SYSTEM, GASOLINE. This Preliminary Information communication provides information to the technician about vehicles that have not engagement into drive, delayed, no engagement into reverse, and or a range inhibit. Technician may find Diagnostic Trouble Codes P0701, P0731, P0732, P0733, P0734, P0736, P0751, P0756, P0761, P0776, P0843, P0848, P0873, P0877, P0894 or P2723. Technician should follow published Service Information diagnostics for Diagnostic Trouble Code P0701 first. Technician will also ensure the fluid level is at the top of the hot band when the transmission fluid temperature is 175° Fahrenheit. Diagnostic Trouble Codes P0701, P0731, P0732, P0733, P0734, P0736, P0751, P0756, P0761, P0776, P0843, P0848, P0873, P0877, P0894 or P2723 can set by the following fluid service/filter change, transmission service involving removing the pan, low fluid level caused by leaks, or after long periods of storage. If the fluid level has been properly checked using the HOT check procedure listed in Service Information document 2408059 and any of the Diagnostic Trouble Codes reset during a cold start inspect the internal suction filter for possible cracks. If no other concerns are found inspect for a stuck lube regulator valve in the pump cover due to debris.
PIC5088E2017-12-22. Service bulletin. EQUIPMENT; EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.. This Preliminary Information communication provides information to the technician about vehicles that may not receiving all channels on the XM band. Technician will need to use a scan tool and verify current Digital Radio Receiver Status under Data Display. Technician will need to look at the second line labeled Digital Radio Receiver Status will display a number of 00 - 04. Technician will repair per the status code.
PIP5137B2017-12-22. Service bulletin. ENGINE; POWER TRAIN. This Preliminary Information communication provides information to the technician about vehicles that may have a rough idle and/or a vibration at idle in gear. Technician will need to try centering the engine and transmission mount. For vehicles built before 07/01/2013 if no change the shim to the right engine mount 2 most inner bolts 3mm.
PIC5588B2017-12-22. Service bulletin. EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM); EQUIPMENT. This Preliminary Information communication provides information to the technician on the programming and activation of the OnStar system. For many 2008 and prior model year GM vehicles, the programming is performed using the Tech 2 and the activation is initiated by a Service Programming System. For the 2010 and UP model year vehicles, the OnStar set-up procedure and OnStar Activation request have been combined into a single programming event called OnStar Set-up and Activation in Service Programming System.
PIT5277A2017-12-22. Service bulletin. BACK OVER PREVENTION; EQUIPMENT; ELECTRICAL SYSTEM. This Preliminary Information communication provides information to the technician on the steps to diagnose and repair vehicles that may have intermittent and hard to duplicate Rear Camera blank, distorted, or fuzzy. Also no radio, OnStar, or speech audio and the volume is unable to be adjusted from the integrated center stack or the steering wheel controls. The driver information center will show ?No Audio? in Audio mode. Technician will need to inspect X275 and X225 for bent terminals, terminals backing out of the connector, or terminals contacting another terminal behind each side of the connector and repair as necessary.
PIP4379L2017-12-22. Service bulletin. POWER TRAIN; ELECTRICAL SYSTEM. This Preliminary Information communication provides information to the technician about vehicles that have not engagement into drive, delayed, no engagement into reverse, and or a range inhibit. Technician may find Diagnostic Trouble Codes P0701, P0731, P0732, P0733, P0734, P0736, P0751, P0756, P0761, P0776, P0843, P0848, P0873, P0877, P0894 or P2723. Technician should follow published Service Information diagnostics for Diagnostic Trouble Code P0701 first. Technician will also ensure the fluid level is at the top of the hot band when the transmission fluid temperature is 175° Fahrenheit. Diagnostic Trouble Codes P0701, P0731, P0732, P0733, P0734, P0736, P0751, P0756, P0761, P0776, P0843, P0848, P0873, P0877, P0894 or P2723 can set by the following fluid service/filter change, transmission service involving removing the pan, low fluid level caused by leaks, or after long periods of storage. If the fluid level has been properly checked using the HOT check procedure listed in Service Information document 2408059 and any of the Diagnostic Trouble Codes reset during a cold start inspect the internal suction filter for possible cracks. If no other concerns are found inspect for a stuck lube regulator valve in the pump cover due to debris.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.