Service bulletins for the 2018 GMC Acadia
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
1071 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
By topic
| PIC6048K | 2019-10-15. Service bulletin. ELECTRICAL SYSTEM; LANE DEPARTURE. This Preliminary Information communicates to the technician that some customers may comment on the operation of their haptic seat during a Lane Keep Assist event. Lane Keep Assist works differently than Lane Departure Warning. The Lane Keep Assist icon is solid amber, Forward Camera Module is actively commanding a torque to Electronic Power Steering. This means that the driver should also feel some feedback from the steering wheel. No Chimes or haptic in the seat. Lane Keep Assist icon is flashing amber; Forward Camera Module is actively commanding torque to Electronic Power Steering. This will also be accompanied with Lane Departure Warning chimes and haptic in the seat feedback based on the setting chosen in the vehicle settings. This will take place when the vehicle has crossed lane marking by (40 cm) or (15.75 in). |
|---|---|
| PIP5676 | 2019-10-15. Service bulletin. EQUIPMENT. This Preliminary information communicates to the technician information on what may be setting DTC P06DE. This is in addition to what is already in the service manual. |
| PIP5632B | 2019-10-15. Service bulletin. ELECTRICAL SYSTEM. This Preliminary Information communication provides information to the technician that General Motors Technical Assistance Center may ask for Global Diagnostic System 2 Session Log. Technician will need use Global Diagnostic System 2 to send the session logs to General Motors Technical Assistance Center for further assistance on the vehicle in question. |
| PIT3099S | 2019-10-15. Service bulletin. EQUIPMENT:ELECTRICAL. This Preliminary Information communication provides information to the technician about installing General Motors Accessory parts/kits. Technicians should refer to Service Information for information regarding most accessories. Technicians may also contact PARTECH and/or the Techline Customer Support Center for additional support. |
| PIT5551E | 2019-10-15. Service bulletin. FORWARD COLLISION AVOIDANCE. This Preliminary information communicates a "Forward Collision System Reduced" message displayed on the DIC when the Forward Automatic Braking has been set to the "Alert" setting. This is normal when the FAB has been set to "Alert". |
| N192218430 | 2019-09-30. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM; EQUIPMENT. N192218430 - Customer Satisfaction Program. During service, certain vehicles equipped with OnStar (RPO UE1), may have received an incorrect and partially programmed/configured replacement OnStar module. This condition will disable certain OnStar features, including Remote Access (remote start, door lock/unlock, etc.), Connected Access (vehicle diagnostics, dealer maintenance notification, etc.), and Unlimited Access (Turn-by-Turn Navigation). The OnStar Safety & Security Plan (Automatic Crash Response and Stolen Vehicle Assistance) is functional. Dealers are to replace the OnStar module, program, confirm and register the new module correctly by pushing the blue button for confirmation with an OnStar advisor. |
| PIE0509B | 2019-09-23. Service bulletin. SEATS. This engineering information (EI) closure ends the need for information from the field for a condition of drivers seat track will not adjust forward and/or backwards and becomes seized. |
| PI0592E | 2019-09-23. Service bulletin. ELECTRICAL SYSTEM. This preliminary information bulletin provides information om Service Programming System (SPS) Error Codes E4398, E4399, E4403, M4404, M4413, E4414, E4423, E4491 or E6961). |
| 130089008B | 2019-09-23. Service bulletin. EQUIPMENT. This bulleting provides Wiring, Terminal and Connector Repair Information including how to determine the Service Part Number in eSI and how to locate the part(s) in the EPC. |
| 090604026R | 2019-09-23. Service bulletin. ENGINE AND ENGINE COOLING. This bulletin provides information on identifying Non-GM Engine Calibrations for Gasoline Engines using the Tech 2 or GDS 2. |
| 080730026F | 2019-09-23. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION. This informational bulletin provides information on Some vehicles may rock or move slightly forward or rearward while in Park at start up after cold soak. This condition may be accompanied by a clunk noise. This is a slight movement that is more often seen visually, rather than felt, when viewed from the outside and using the auto-start feature, if equipped. |
| 070601016F | 2019-09-23. Service bulletin. ENGINE AND ENGINE COOLING. This informational bulletin provides information on Internal Engine Noise or Damage After Oil Filter Replacement. |
| 000601026M | 2019-09-23. Service bulletin. ENGINE AND ENGINE COOLING. This informational bulletin provides information on replacing the intake manifold when the engine is replaced after severe internal engine damage. |
| 19NA115 | 2019-09-23. Service bulletin. SERVICE BRAKES. This technical bulletin provides repair information to correct a customer concern of a rear brake squeal noise. |
| 18NA266 | 2019-09-23. Service bulletin. ELECTRICAL SYSTEM. This technical bulletin provides repair information to correct a customer concern of an intermittent blank or flickering driver information center (DIC). |
| 18NA146 | 2019-09-23. Service bulletin. EQUIPMENT. This warranty administration bulletin provides policy information, proper labor operation selection and causal part identification for warranty transactions (U.S. Only). |
| 17NA271 | 2019-09-23. Service bulletin. WHEELS. This bulletin provides a procedure to clean the back side of the rims and rotors and to correct the customers concern of wheel clicking. |
| 17NA143 | 2019-09-23. Service bulletin. POWER TRAIN:DRIVELINE:DRIVESHAFT. This technical bulletin provides a procedure to replace the axle nuts and washers if a clicking noise is heard on turns from the front. |
| 16NA109 | 2019-09-23. Service bulletin. STEERING. This technical bulletin provides a procedure inspecting for excess grease or Sealant on the Exterior of the steering gear due to seeing grease or sealant on certain locations on the gear. |
| PIC6123E | 2019-09-16. Service bulletin. ELECTRICAL SYSTEM. This Preliminary Information communication provides information to the technician for the adaptive cruise control or lane keep assist unavailable message in the driver?s information center after the vehicle has been parked in direct sunlight and high ambient temperatures. The cameras electronic control unit?s internal operating temperature range is -40 degrees Celsius to 85 degrees Celsius. If the temperature of the electronic control unit of the camera module exceeds 85 degrees Celsius the image processor will no longer function resulting in adaptive cruise control and lane keep assist to be unavailable until the temperature falls to below the maximum operating temperature range |
| PIT5606G | 2019-09-16. Service bulletin. ELECTRICAL SYSTEM:WIRING; VISIBILITY. This Preliminary information communicates an Intermittent No Crank, No Start, or Reduced Power loss of data multiple U codes or Intermittent Power Door Locks inoperative, unwanted seat or mirror movement. Inspect harness for chaffed by the I-shaft at the base of the steering column. If chaffed, repair damaged wires and zip tie the harness away from the I-shaft. Also Inspect the HVAC drain hose is properly routed and not plugged. |
| PIC6123D | 2019-09-16. Service bulletin. ELECTRICAL SYSTEM; LANE DEPARTURE; ENGINE; FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL. This Preliminary Information communication provides information to the technician for the adaptive cruise control or lane keep assist unavailable message in the driver?s information center after the vehicle has been parked in direct sunlight and high ambient temperatures. The cameras electronic control unit?s internal operating temperature range is -40 degrees Celsius to 85 degrees Celsius. If the temperature of the electronic control unit of the camera module exceeds 85 degrees Celsius the image processor will no longer function resulting in adaptive cruise control and lane keep assist to be unavailable until the temperature falls to below the maximum operating temperature range |
| 990089019R | 2019-08-19. Service bulletin. EQUIPMENT. This informational bulletin provides process information for the (GWM) and (WPC) parts return program. |
| 19NA167 | 2019-08-19. Service bulletin. STRUCTURE:BODY:HATCHBACK/LIFTGATE; STRUCTURE; ELECTRICAL SYSTEM. This technical bulletin provides repair information to correct a customer concern of a water leak into interior, and/or various electrical concerns, liftgate actuator noisy or inoperative. |
| 17NA217 | 2019-08-19. Service bulletin. SERVICE BRAKES, HYDRAULIC. This technical bulletin provides a procedure to replace the front brake pads with single shim pad kit to correct a condition of Squeal Noise Originating from Front Brakes During Brake Apply. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.