Service bulletins for the 2018 GMC Acadia
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
1071 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
By topic
Only bulletins with component: Wiring and fuses are shown. Show all
| 17-NA-292 | 2021-04-14. Service bulletin. ELECTRICAL SYSTEM:WIRING:RELAYS/SOLENOIDS; ELECTRICAL SYSTEM:WIRING. Malfunction Indicator Lamp (MIL) Illuminated - DTC P3409 and/or P3433 Condition Some customers may comment that the MIL is illuminated. The technician may find one or more of the following DTCs set: • P3409 • P3433 Cause This condition may be caused by a wiring issue with both/either the cylinder 2 deactivation solenoid oil control valve circuit and/or the cylinder 5 deactivation solenoid oil control valve circuit. These codes may be active or stored in history. • This may also be a repeat concern. Correction Note: When replacing the solenoids, ensure there are no terminal issues at the connector. To correct this condition, refer to the information below: • If vehicle was built between 4/13/2017 and 8/7/2017, it will be necessary to replace both right and left bank Cylinder Deactivation Solenoids (AFM OCV). • If vehicle was built outside the date range, check for any terminal issues at the connector. If no trouble found, follow SI diagnostics for the applicable DTC. |
|---|---|
| PIT5606G | 2019-09-16. Service bulletin. ELECTRICAL SYSTEM:WIRING; VISIBILITY. This Preliminary information communicates an Intermittent No Crank, No Start, or Reduced Power loss of data multiple U codes or Intermittent Power Door Locks inoperative, unwanted seat or mirror movement. Inspect harness for chaffed by the I-shaft at the base of the steering column. If chaffed, repair damaged wires and zip tie the harness away from the I-shaft. Also Inspect the HVAC drain hose is properly routed and not plugged. |
| 17NA292 | 2019-05-13. Service bulletin. ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM:WIRING. This technical bulletin provides a procedure to inspect the wires and/or replace the Valve Rocker Arm Oil Control Valves if the DTCs listed are set. |
| 100089005G | 2019-05-13. Service bulletin. ELECTRICAL SYSTEM:WIRING. This warranty admin bulletin explains to the technician additional information may be needed when submitting transactions when doing wiring repairs. |
| 100089005H | 2019-03-18. Service bulletin. ELECTRICAL SYSTEM:WIRING. This warranty admin bulletin explains to the technician additional information may be needed when submitting transactions when doing wiring repairs. |
| 17NA317 | 2018-05-21. Service bulletin. ELECTRICAL SYSTEM:WIRING. This technical bulletin provides a procedure to repair the crankshaft positioning sensor wiring harness by installing a new wiring harness. |
| 17NA292 | 2018-04-23. Service bulletin. ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; ELECTRICAL SYSTEM:WIRING. This technical bulletin provides a procedure to inspect the wires and/or replace the Valve Rocker Arm Oil Control Valves if the DTCs listed are set. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.