WenmarOpen by Wenmar Pro

Service bulletins for the 2019 Ford Transit

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

152 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Electrical system are shown. Show all

Bulletins, newest first
SSM 487572020-05-04. Service bulletin. ELECTRICAL SYSTEM. Some customers may experience a notification in the FordPass and/or LincolnWay apps that indicates their vehicle has entered "deep sleep mode". This mode is enabled due to the vehicle not being started for 14 consecutive days or battery voltage is at/or below 9.5 volts. Some 2020 models will also set a warning if the telematic control unit (TCU) has received an automatic over the air update. The purpose of deep sleep mode is to conserve battery voltage. When deep sleep mode is enabled, the TCU is powered down and all communication with the FordPass and/or LincolnWay apps are disabled. To wake the vehicle from deep sleep mode, manually start the vehicle. More deep sleep mode information can be found in the FordPass or LincolnWay apps under: More > Guides > click in search entry box > type "deep sleep" and click on "Ask".
SSM 486332020-04-02. Service bulletin. POWER TRAIN; ELECTRICAL SYSTEM. SSM 48633 - 2018-2019 Transit - 3.2L Diesel Engine - Illuminated Malfunction Indicator Lamp (MIL) With Diagnostic Trouble Code (DTC) P2452 And/Or P2453 Some 2018-2019 Transit vehicles equipped with a 3.2L diesel engine may experience an illuminated MIL with DTC P2452 and/or P2453 stored in the powertrain control module (PCM). Engineering is working to implement a solution for this condition. In the interim, clear the DTCs with the appropriate Ford scan tool. Advise the customer that a repair is expected to be available mid-May 2020 and that the condition has no effect on vehicle operation or long term durability. Dealers are asked to follow-up with their customers to schedule a service appointment once a TSB is published.
SSM 486192020-04-02. Service bulletin. UNKNOWN OR OTHER; ELECTRICAL SYSTEM. SSM 48619 - Various Vehicles - Perimeter Alarm Armed And Original Vehicle Keys Cannot Be Accessed to Enter Vehicle - CAN Protection Strategy Some 2013-2016 Model Year Vehicles may exhibit a concern in which the Perimeter Alarm is active and the original keys cannot be accessed to disable the perimeter alarm. This concern would most often occur when a customer loses keys and the dealership is attempting to program new keys to the vehicle. The Workshop Manual (WSM), Section 419-01A Perimeter Anti-Theft Alarm - System Operation and Component Description has been updated to inform of the Controller Area Network (CAN) Protection Strategy. Follow the procedure outlined to prevent replacement of the Body Control Module (BCM) on CAN Protection Strategy equipped vehicles when original keys are lost and perimeter alarm is active. Refer to the WSM for further detail on the CAN Protection Strategy. Lost keys and replacement of BCM for lost keys is non-warrantable.
SSM 485582020-03-03. Service bulletin. ELECTRICAL SYSTEM. SSM 48558 - 2017-2020 Various Vehicles Equipped With Telematics Control Unit (TCU) - Various FordPass/LincolnWay Mobile App Concerns Some 2017-2020 Ford and Lincoln vehicles equipped with a TCU may exhibit inoperative remote features via Ford Pass/Lincoln Way mobile app, incomplete user authorization and/or no modem electronic serial number (ESN) displayed. To correct this condition prior to programming, remove the TCU fuse for 5 minutes then reinstall. Delete all previous session files for the vehicle. Verify that the electronic serial number (ESN) is now displayed. Start a new IDS/FDRS session. Program the TCU to the latest IDS/FDRS version level. Make sure you are connected to the internet before retesting. If the concern is still present, follow normal diagnostics in Workshop Manual(WSM), Section 415-00. Refer to PTS OASIS home page for TCU version identification. For claiming, use causal part 14G229 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
SSM 484432020-02-04. Service bulletin. ELECTRICAL SYSTEM. Some 2019-2020 Transit Connect vehicles may exhibit an inoperative electrical AC power outlet socket built on or after 28-May-2018. This may be due to a body control module (BCM) software missing a signal to the alternating current to direct current (AC/DC) inverter control module. To correct the condition, reprogram the BCM with the latest level of the appropriate Ford diagnostic scan tool. For claiming use causal part 14A068 and applicable labor operations in Section 03 of the Service Labor Time Standards (SLTS) Manual.
SSM 483402019-12-05. Service bulletin. ELECTRICAL SYSTEM. Some 2016-2019 vehicles equipped with SYNC 3 may experience a map displayed on the left half of the SYNC screen with no other information/soft buttons present after updating to the latest version of V3.0 software. This issue occurs when the SYNC 3 system has been previously modified using an aftermarket device to display the Ford GT welcome screen/HMI Theme. To correct this issue, please contact the Technical Hotline Assistance Center to have the vehicle restored back to its original state.
SSM 480532019-07-08. Service bulletin. ELECTRICAL SYSTEM. Some 2016-2019 Ford and Lincoln vehicles equipped with SYNC 3 not at the latest software level may exhibit Various Performance Related concerns such as Display Operation, Navigation, Voice Recognition, Phone Pairing, Applink, Travel Link, Slow System Response, etc. Check for SYNC software update under the OASIS Tab SYNC selection. If an update is available refer to WSM,Section 415-00 and update the APIM software. After Installation, complete pop-up appears, remove USB flash drive and install into IDS tool to update Ford database. Perform a complete ignition cycle by turning the key off for 5 minutes which is critical for a successful installation. If no updates are available or a blue or black screen is present after an update refer to WSM, Section 415-00 for diagnosis or SYNC 3 intermittent blank screen GSB for tips. For claiming, use causal part 14G371 and applicable labor operations in section 10 of the SLTS manual. Section
SSM 480182019-07-08. Service bulletin. ELECTRICAL SYSTEM; VISIBILITY:POWER WINDOW DEVICES AND CONTROLS. Some 2015-2019 Transit vehicles may exhibit inoperative power door locks and/or power windows due to water intrusion in the door to body harness connector C339 (left) or C340 (right). If corrosion is found, service pigtails JU2Z-14S411-RA (gray) and JU2Z-14S411-PA (black) are released to service the body harness (female) side of the connector, without replacing the entire 14401 body harness. Service the pigtail(s) and replace the door harness as needed, while making sure the door to body accordion grommet ends and surrounding body plugs are properly seated to prevent future water intrusion. For claiming use causal part 14631 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
SSM 479262019-05-07. Service bulletin. FUEL SYSTEM, GASOLINE; ELECTRICAL SYSTEM. SSM 47926 - 2018-2019 F-150/Expedition/Navigator/Transit/Explorer - Illuminated MalfunctionIndicator Lamp (MIL) With Diagnostic Trouble Code (DTC) P025A Some 2018-2019 F-150, Expedition, Navigator, Transit and Explorer vehicles may exhibit an illuminated MIL with DTC P025A stored in the powertrain control module (PCM). This may be due to an intermittent or partial disconnect of the harnessto the fuel pump driver module (FPDM) connector. Confirm FPDM connector (F-150 C4336, Expedition/Navigator C433, Transit C433, Explorer C3239) is fully seated prior to performing PC/ED diagnostics or replacing any components. APPLICABLE VEHICLES
SSM 478502019-05-07. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT:APPLIANCE:AIR CONDITIONER. Some 2013-2019 vehicles equipped with a EVDC air conditioning (A/C) compressor may exhibit poor A/C performance/improper climate function and/or a diagnostic trouble code (DTC) P06A0 in the powertrain control module (PCM). To support the proper diagnosis of this compressor, the EVDC control valve tester has been developed and is available from Rotunda (339-EVDC100). A tester has been provided to each U.S. dealership free of charge with shipments completed 19-Apr-2019 (reference EFC07013 on FMCDealer.com). This tester will help reduce the potential for misdiagnosis and unnecessary compressor replacement. Make sure that this tester is used for warranty repairs and document the test results in the Technician Comments field. Refer to the Rotunda catalog for a video and user manual which provide detailed operating instructions.
SSM 478242019-04-08. Service bulletin. ELECTRICAL SYSTEM. Some 2015-2017 vehicles may experience a no crank concern due to a security access key table error. When attempting to program keys or perform a parameter reset, the procedure may fail and the Integrated Diagnostic System (IDS) scan tool may display an error 232: Key Table Not Allocated. If this error message is encountered, the Body Control Module (BCM) is internally faulted and requires replacement. For claiming, use causal part 15604 and applicable labor operations in section 10 of the Service Labor Times Standards (SLTS) manual.
TSB 19-20352019-04-08. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE; FUEL SYSTEM, GASOLINE; ELECTRICAL SYSTEM. Some 2016-2019 Transit vehicles equipped with a 3.2L diesel engine built on or before 7-Feb-2019 may exhibit an illuminated malfunction indicator lamp (MIL) with only diagnostic trouble code (DTC) P054E stored in the powertrain control module (PCM). This may be due to the PCM software. Update the PCM software to resolve the condition.
SSM 478242019-04-01. Service bulletin. ELECTRICAL SYSTEM. Some 2015-2017 vehicles may experience a no crank concern due to a security access key table error. When attempting to program keys or perform a parameter reset, the procedure may fail and the Integrated Diagnostic System (IDS) scan tool may display an error 232: Key Table Not Allocated. If this error message is encountered, the Body Control Module (BCM) is internally faulted and requires replacement. For claiming, use causal part 15604 and applicable labor operations in section 10 of the Service Labor Times Standards (SLTS) manual.
SSM 477222019-03-04. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. Some 2018-2019 Escape, Transit Connect and EcoSport vehicles equipped with a keyed ignition and a factory invoiced accessory (FIA) VSS may exhibit intermittent alarm activation with lights flashing and the horn sounding after a loud noise and/or shockwave near the vehicle (ex. large truck passing, garage door slamming closed). The root cause of this concern may be an incorrect shock sensor sensitivity adjustment on the VSS module. Perform the shock sensor sensitivity adjustment procedure outlined in the vehicle security/remote start installation guide located on the PTS website. The shock sensor requires adjustment during the installation of a vehicle security/remote start system. The shock sensor sensitivity adjustment procedure should be performed following the installation instructions.
SSM 477112019-03-04. Service bulletin. ELECTRICAL SYSTEM. Some 2016-2019 Ford and Lincoln vehicles equipped with SYNC 3 and a 6, 8 or 10 inch screen may show a pop-up message every key cycle that states 'SYNC can check for updates when connected to a WiFi network'. To remove the inconvenience of the pop-up the customer can either connect to a trusted WiFi network to complete the setup process or turn off WiFi in the WiFi settings located under the Settings menu. Adjusting the setting for the customer is not a warrantable defect.
SSM 476732019-01-07. Service bulletin. ELECTRICAL SYSTEM. Some 2016-2019 Transit vehicles equipped with a 3.2L diesel may indicate a blank PCM when connected to the Ford diagnostic scan tool. Do not replace the PCM. As a work around to access the PCM, remove the key from the ignition for 1 minute. Then remove the PCM relay in the battery junction box. Reinstall the PCM power relay, then put the key in the ignition and turn to on and attempt to access the PCM. Engineering is investigating the issue. Monitor OASIS for updates.
SSM 476712019-01-07. Service bulletin. ELECTRICAL SYSTEM. For 2015-2019 Transit vehicles, multiple fuse assemblies for the high current battery junction box are available for service. Do not replace the high current battery junction box assembly/wire harness to service an open fuse. Use part number BK2Z-14526-A for the 40 amp/100 amp/470 amp assembly, BK2Z-14526-B for the 2x60 amp/2x80 amp/3x100 amp/200 amp assembly, and BK2Z-14S411-A for the 60 amp MIDIù fuses on the outboard side of the driver seat base. Refer to Wiring Diagram Cell 11-7 for proper location.
SSM 476352019-01-07. Service bulletin. ELECTRICAL SYSTEM. When connecting the Vehicle Communication Module (VCM) and Integrated Diagnostic System (IDS) or Ford Diagnosis and Repair System (FDRS) to the DLC located on the driver side under the steering column at the GWM, make sure that the ignition is off before connecting the VCM. If the ignition is on or the engine is running during the connection, it can result in various warning lights being illuminated with diagnostic trouble codes (DTCs), no start, no crank conditions or the IPC inoperative. If a vehicle displays these issues, disconnect the equipment from the DLC and disconnect the vehicle battery. Wait 10 minutes and reinstall with the ignition off. Clear any DTCs present and retest.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.