WenmarOpen by Wenmar Pro

Service bulletins for the 2022 Ford Mustang Mach-E

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

224 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Bulletins, newest first
TSB 26-20052026-01-21. Service bulletin. ELECTRICAL SYSTEM; FUEL/PROPULSION SYSTEM; SEATS. This article supersedes TSB 25-2058 to update: service procedure enhancements, and increase labor operation allowances. Some of the vehicles listed in the Model statement above may exhibit a 12-volt battery drain. This may be due to the software level of various modules such as the gateway module (GWM), accessory protocol interface module (APIM) and driver front seat module (DSM).
SSM 544242025-12-10. Service bulletin. STRUCTURE:BODY. Some 2021-2025 Mustang Mach-E vehicles may exhibit a condition where the front luggage compartment hood is hard to close. This may be due to an alignment issue with the hood. The most common adjustments to improve closing efforts involve the hood front up and down alignment and the bump stop rubbers. Refer to Workshop Manual, Section 501-03 Body Closures > General Procedures > Hood Alignment for procedures on proper adjustments that can improve front luggage compartment hood closing efforts.
SSM 544032025-12-01. Service bulletin. POWER TRAIN. * 2021-2024 Bronco Sport built on or before 15-Dec-2024<br /> * 2022-2024 Mustang Mach-E<br /> * 2022-2025 Escape built on or before 22-May-2025<br /> * 2024 Maverick vehicles built on or after 17-Jan-2024<br /> <br /> Some of the above vehicles may exhibit an illuminated powertrain malfunction (wrench) indicator with diagnostic trouble code (DTC) P0929 stored in the gear shift module (GSM). This may be due to the software in the GSM. To correct the condition, reprogram the GSM module using the latest software level of the Ford Diagnosis and Repair System (FDRS). For claiming, use causal part 7P155 and labor operation numbers 7001D and 7001D4.
SSM 543882025-12-01. Service bulletin. FUEL/PROPULSION SYSTEM. Some 2021-2023 Mustang Mach-E vehicles equipped with nickel, cobalt and manganese (NCM) standard/extended range battery with minor feature codes HTHAD/HTHAE and 2022-2025 e-Transit vehicles equipped NCM standard range battery with minor feature codes HUKAL/HUKAA may require a high voltage battery module replacement. Technicians can now replace the affected battery module for high voltage batteries with a state of health (SOH) of 70% or higher. It is no longer necessary to replace the complete high voltage battery assembly for vehicles with 70% SOH or higher. Additionally, the battery health chart has been updated to display the actual battery SOH as a percentage and now requires the selection of checkboxes corresponding to the specific high voltage battery module(s) being replaced. After a high voltage battery module replacement and battery reinstallation, relaunch the Ford Diagnosis and Repair System (FDRS) "BECM - Battery Health" application which will prompt for confirmation of a successful repair.<br /><br /> To confirm a vehicle is built with a certain minor feature code, review the build information
SSM 543872025-12-01. Service bulletin. ENGINE; ELECTRICAL SYSTEM; UNKNOWN OR OTHER. Some 2021-2024 Mustang Mach-E vehicles may exhibit a condition where the interior propulsion sound feature does not remain active and deactivates immediately. This may be due to the audio control module (ACM) configuration. To restore the functionality of this feature, download and run the "ACM - Enable Engine Sound Enhancement and Active Noise Control" application in the Ford Diagnosis and Repair System (FDRS) scan tool. In cases where the ACM is replaced, this routine will run during the "ACM - Programmable Module Installation (PMI)" application. Make sure to follow the FDRS on-screen instructions carefully. For claiming, use causal part 18C869 and labor operation numbers 12651D and 12651D4.
SSM 543132025-10-28. Service bulletin. LANE DEPARTURE: BLIND SPOT DETECTION; ELECTRICAL SYSTEM. Some 2020-2025 various Ford and Lincoln vehicles equipped with blind spot information system (BLIS) may experience an inoperative blind spot monitoring with a "Blind Spot System Fault" message displayed in the instrument panel cluster (IPC). This may also be accompanied by diagnostic trouble codes (DTCs) B118C:11 and/or B118C:15 stored in the driver door module (DDM), and/or B118D:11 and/or B118D:15 stored in the passenger door module (PDM). This may be due to the wiring connector from the mirror to the BLIS module. If diagnostics lead to an internal mirror wiring harness fault, a new lower level BLIS light pigtail is now released for service. It is not necessary to replace the exterior mirror assembly. Use part number SC3Z-14A411-B to resolve the concern.
TSB 25-25122025-10-28. Service bulletin. LANE DEPARTURE: ASSIST; FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL; ELECTRICAL SYSTEM. This article supersedes TSB 25-2104 to update the labor times associated with the Service Procedure. Some of the vehicles listed in the Model statement above may exhibit all of the following conditions: * Inoperative BlueCruise and lane centering * DTC U2018:51 stored in the camera module - rear (CMR) * DTC U0565:86 stored in the image processing module A (IPMA) * DTC U3000:49 is not stored in the CMR This may be due to the software in the CMR.
HVAC-25.26 MachE2025-10-17. Over-the-air update. ENGINE; VISIBILITY/WIPER. Quality improvements include: -Calibration update for the Heating Ventilating and Air Conditioning module to prevent window fogging in cold weather
TSB 25-24272025-09-18. Service bulletin. FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL; LANE DEPARTURE: ASSIST. Some of the vehicles listed in the Model statement above may exhibit an inoperative Blue Cruise and Lane Keeping system with diagnostic trouble code (DTC) U3000:49 with a status byte of 8F stored in the camera module-rear (CMR). This may be due to the CMR software level. NOTE: The driver status monitor camera module may also be called camera module-rear.
TSB 25-23982025-09-03. Service bulletin. SERVICE BRAKES; ELECTRICAL SYSTEM; UNKNOWN OR OTHER. This article supersedes TSB 23-2021 to update the service procedure and labor times from M-time to AP-time and add a limit. Some of the vehicles listed in the Model statement above equipped with the rear view camera system only may exhibit the "Reverse Brake Assistance Not Available" message and diagnostic trouble code (DTC) B1578:78 stored in the image processing module A (IPMA) that cannot be cleared. This may be due to the IPMA software.
DSMC-24.5.7 MachE2025-08-21. Over-the-air update. UNKNOWN OR OTHER; ELECTRICAL SYSTEM. "Quality improvements include: -Addresses a Diagnostic Trouble Code that causes the Driver State Monitoring Camera module to get stuck in bootloader"
SSM 541402025-08-19. Service bulletin. ELECTRICAL SYSTEM; UNKNOWN OR OTHER. Some 2021-2024 F-150 vehicles equipped with a B&amp;O audio system (minor feature code IDBBQ), and various 2021-2024 Ford and Lincoln vehicles equipped with a B&amp;O audio system may exhibit a pop noise and/or static in the speakers at start up that cannot be turned down or off using the audio system controls. To confirm a vehicle is built with a certain minor feature code, review the build information by double-clicking the vehicle identification number (VIN) in the upper left corner on Professional Technician System (PTS). This may be due to software in the digital signal processing (DSP) module. To correct this condition, reprogram the DSP module to the latest software level using the Ford Diagnosis and Repair System (FDRS) scan tool. For claiming, use causal part 18B849 and labor operations 12651D and 12651D4.
SSM 540902025-08-04. Service bulletin. ELECTRICAL SYSTEM. Some 2021-2025 Ford and Lincoln vehicles equipped with SYNC4/Digital Experience may exhibit an unsuccessful telematics control unit module (TCU) software update or software activation during a universal serial bus (USB) update. This may be due to the vehicle connectivity setting being disabled.
TSB 25-23432025-07-30. Service bulletin. ELECTRICAL SYSTEM; FUEL/PROPULSION SYSTEM. This article supersedes TSB 22-2491 to update labor times from M-time to AP-time and add a cap. Some of the vehicle listed in the model statement above may exhibit at least one of the following conditions: - Illuminated red triangle with diagnostic trouble code (DTC) P27B4 stored in the secondary on-board diagnostic module C (SOBDMC) - Charge Status Indicator (CSI) is blinking red with DTC P0A7F stored in the battery energy control module (BECM) - DTC P0CF7 stored in the secondary on-board diagnostic control module (SOBDM) This may be due to an unsecured plug-in electric vehicle supply equipment (EVSE). To correct the condition, follow the Service Procedure to reprogram the SOBDM.
SSM 540652025-07-24. Service bulletin. FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL; LANE DEPARTURE: ASSIST. Some 2022-2024 Mustang Mach-E vehicles may exhibit an inoperative BlueCruise and lane centering with diagnostic trouble code (DTC) U3000:49 stored in the camera module rear (CMR). This may be due to the software level of the CMR. Inform customers that engineering is currently working on a solution for this condition that is expected in Q3 2025. Monitor Professional Technician System (PTS) for additional information.
SCCM-25.DC MachE2025-07-02. Over-the-air update. LANE DEPARTURE: WARNING; ELECTRICAL SYSTEM; LANE DEPARTURE: ASSIST. Quality improvements include: -Ensures the lane change assist turn signal flashes until the change maneuver is complete
SU-10.2.0 MachE2025-07-02. Over-the-air update. SERVICE BRAKES. "Quality improvements include: - Brake pedal tuning parameters updated for an improved pedal feel -Calibration update to ensure One Pedal Drive functionality"
IPC-25.7.46 MachE2025-07-02. Over-the-air update. ELECTRICAL SYSTEM. "Quality improvements include: -Addresses cases where the cluster was stuck on charging screen -Addresses Instrument Panel Cluster delays after doing a quick restart -Customers will be able to turn off the traction control using the toggle"
TSB 25-22922025-07-01. Service bulletin. ELECTRICAL SYSTEM. This article supersedes TSB 24-2010 to update the Service Procedure and change labor operation from actual to fixed time. Some of the vehicles listed in the Model statement above may exhibit a condition where the high voltage battery charges slowly or does not charge while using a level 1 or level 2 electric vehicle supply equipment (EVSE) after an over the air (OTA) update. This may be due to the software in the secondary on-board diagnostic control module A (SOBDM).
TSB 25-22772025-07-01. Service bulletin. VEHICLE SPEED CONTROL. Some of the vehicles listed in the Model statement above may exhibit at least one of the following conditions: *Speedometer stays at 1 mph (1 km/h) when the vehicle is stopped *Speedometer lags during deceleration and acceleration *Car image in the center of the IPC is always displayed *Speedometer is delayed in displaying on bootup *IPC bootup is delayed when attempting to start the vehicle directly from accessory mode *IPC is stuck on the charging/accessory screen when placed in Drive/ready to drive *After vehicle start up, the lane keeping system status telltale briefly displays *Buzz noise from the IPC that changes with the brightness setting This may be due to the software in the IPC.
SSM 539662025-06-24. Service bulletin. ELECTRICAL SYSTEM; UNKNOWN OR OTHER. Some 2021-2025 Ford/ Lincoln vehicles equipped with SYNC4 may not be able to perform an update to the accessory protocol interface module (APIM). This may be due to the software in the APIM. Ford Engineering has de-activated the ability to update these SYNC4 APIM modules as applicable, and the Ford Diagnosis and Repair System (FDRS) will not present an update for the APIM module. Some existing directed repairs may be impacted, check Professional Technician System (PTS) before attempting any specific technical service bulletin (TSB)/special service message (SSM) and check field service action (FSA) landing pages before attempting any FSA repairs. For any vehicle repairs requiring a software update that includes an APIM update in the programming sequence, if the 5-digit product code for the APIM software is equal to or lower than 23187, do not attempt to update affected modules at this time. To determine the 5-digit product code for the APIM software on the vehicle, while the vehicle center display screen is powered up with ignition in run or accessory, go to Settings > General > About SYNC.
TSB 25-22472025-06-10. Service bulletin. ELECTRICAL SYSTEM. This article supersedes TSB 24-2163 to update the Service Procedure and change labor operation from actual to fixed time. Some of the vehicles listed in the Model statement above may exhibit an illuminated powertrain malfunction (wrench) indicator and/or "Stop Safely Now" message in the instrument panel cluster (IPC) with diagnostic trouble codes (DTCs) P0563, P0ADA, P0ADE, P0AA1, P0AA4, P0AA5, P0AA2, P0D10, P0D0F and/or P0C78 stored in the battery energy control module (BECM). The vehicle may also exhibit a low/discharged 12v battery. This may be due to the high voltage battery junction box.
TSB 25-22162025-05-28. Service bulletin. VEHICLE SPEED CONTROL. This bulletin supersedes 24-2187. Reason for update: Add labor operation A and changed MT to AP with a limit. Some of the vehicles listed in the Model statement above may exhibit a "1 Pedal Drive Fault - Press Brake Pedal To Reduce Speed" warning message displayed in the instrument panel cluster (IPC).
24N08 -S12025-05-05. Other. UNKNOWN OR OTHER. Customer Satisfaction Program 24N08 - Supplement #1 Certain 2021-2024 Bronco Sport, Escape, Mach-E, and 2022-2024 Maverick Vehicles Driver’s Side Seat Buckle Replacement
TSB 25-21562025-04-30. Service bulletin. UNKNOWN OR OTHER. This article supersedes TSB 23-2155 to update the Service Procedure and change labor operation from actual time to fixed time. Some of the vehicles listed in the Model statement above may exhibit diagnostic trouble codes (DTCs) C1001:31, U3000:89, and/or U3000:49 stored in the image processing module A (IPMA) and at least one of the following conditions: "Front Camera Fault Service Required" message Pre-collision Assist inoperative Adaptive cruise control inoperative Front windshield camera alignment routine fails to complete This may be due to a connection issue between the IPMA Camera and the IPMA.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.