WenmarOpen by Wenmar Pro

Service bulletins for the 2022 Ford Mustang Mach-E

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

224 on file from NHTSA, as of 2026-10-19.

About U0565 on the 2022 Ford Mustang Mach-E: what the code means, and the bulletins and recalls about the same components.

By type

By component

By trouble code

Only bulletins with trouble code: U0565 are shown. Show all

Bulletins, newest first
TSB 25-25122025-10-28. Service bulletin. LANE DEPARTURE: ASSIST; FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL; ELECTRICAL SYSTEM. This article supersedes TSB 25-2104 to update the labor times associated with the Service Procedure. Some of the vehicles listed in the Model statement above may exhibit all of the following conditions: * Inoperative BlueCruise and lane centering * DTC U2018:51 stored in the camera module - rear (CMR) * DTC U0565:86 stored in the image processing module A (IPMA) * DTC U3000:49 is not stored in the CMR This may be due to the software in the CMR.
TSB 24-22512024-09-02. Service bulletin. LANE DEPARTURE: ASSIST; FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL. This article supersedes TSB 24-2087 to update the vehicle lines, model years affected, action and service procedure. Some 2021-2024 Mustang Mach-E/F-150, 2022-2024 F-150 Lightning/Expedition/Navigator, 2023-2024 Corsair vehicles may exhibit an inoperative BlueCruise and lane centering with DTCs U2018:51 stored in the camera module - rear (CMR) and U0565:86 stored in the image processing module A (IPMA) without DTC U3000:49 stored in the CMR. This may be due to the software level of the CMR. To correct the condition, follow the Service Procedure to reprogram the CMR module using the latest software level of the Ford Diagnosis and Repair System (FDRS).
TSB 24-20872024-04-04. Service bulletin. BACK OVER PREVENTION: SENSING SYSTEM: CAMERA. Some 2022-2023 Mustang Mach-E vehicles which recently received a software update delivered over-the-air (OTA) may exhibit an inoperative BlueCruise and lane centering with diagnostic trouble codes (DTCs) U2018:51 stored in the camera module - rear (CMR) and U0565:86 stored in the image processing module A (IPMA). This may be due to the software level of the CMR. To correct the condition, follow the Service Procedure to reprogram the CMR module using the latest software level of the Ford Diagnosis and Repair System (FDRS).
SSM 523502024-04-04. Service bulletin. BACK OVER PREVENTION: SENSING SYSTEM: CAMERA. Some 2022-2023 Mustang Mach-E vehicles which recently received an OTA update may exhibit an inoperative BlueCruise and lane centering with diagnostic trouble codes (DTCs) U2018:51 stored in the camera module - rear (CMR) and U0565:86 stored in the image processing module A (IPMA). This may be due to the software level of the CMR. Inform customers that engineering is currently working on a solution for this condition and will be released via Ford Power-Up software updates delivered over-the-air (OTA) expected in mid-late March 2024. The software will update automatically if vehicle connectivity is enabled on the vehicle's settings. Schedule a service visit for customers who have disabled vehicle connectivity or who report that they did not receive the update in March 2024. Monitor OASIS for additional information.
TSB 24-20622024-04-03. Service bulletin. ELECTRICAL SYSTEM. Some 2022-2023 Mustang Mach-E vehicles which recently received a Ford Power-Up software updates delivered over-the-air (OTA) may exhibit an inoperative BlueCruise and lane centering with diagnostic trouble codes (DTCs) U2018:51 stored in the camera module - rear (CMR) and U0565:86 stored in the image processing module A (IPMA). This may be due to the software level of the CMR.
SSM 522142024-02-06. Service bulletin. BACK OVER PREVENTION:SOFTWARE. Some 2022-2023 Mustang Mach-E vehicles which recently received an OTA update may exhibit an inoperative BlueCruise and lane centering with diagnostic trouble codes (DTCs) U2018:51 stored in the camera module - rear (CMR) and U0565:86 stored in the image processing module A (IPMA). This may be due to the software level of the CMR. Inform customers that engineering is currently working on a solution for this condition and will be released via Ford Power-Up software updates delivered over-the-air (OTA) expected in March 2024. The software will update automatically if vehicle connectivity is enabled on the vehicle's settings. Schedule a service visit for customers who have disabled vehicle connectivity or who report that they did not receive the update in March 2024. Monitor OASIS for additional information.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.