WenmarOpen by Wenmar Pro

Recalls that may apply to the 2011 Ford F-750

A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.

By component

United States: NHTSA, as of 2026-10-19
15V5330002015-08-20. SEAT BELTS:FRONT:ANCHORAGE. Ford Motor Company (Ford) is recalling certain model year 2011-2013 and 2015 Ford F-650, and F-750 trucks manufactured February 14, 2011, to April 28, 2015, and equipped with a 70% fixed bench passenger seat. The affected vehicles have passenger seat belt anchorage floor attachments that are not installed in the correct location. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 210, "Seat Belt Assembly Anchorages." Built 2011-02-14 to 2015-04-28.
14V1860002014-04-08. ELECTRICAL SYSTEM:12V/24V/48V BATTERY. DUECO Inc. (DUECO), a manufacturer of utility vehicles, is recalling certain Dueco-modified model year 2009-2011 International 4300, 2010 International 4400, 2009 and 2011 International 7400, 2010 Freightliner M2, 2008-2009 GMC C5500, and 2011 Ford F-750 vehicles, equipped with Sure Power DC-DC converters containing a particular epoxy sealing, aka 'potting', compound. The specific potting compound used in the subject products for insulation was found to be capable of conducting electricity after being exposed to heat.
12V0970002012-03-07. SERVICE BRAKES, AIR:SUPPLY:CHECK VALVE. FORD IS RECALLING CERTAIN MODEL YEAR 2011 F-650 AND F-750 TRUCKS, MANUFACTURED FROM DECEMBER 3, 2010, THROUGH DECEMBER 20, 2011, EQUIPPED WITH BENDIX ATR-6 ANTILOCK TRACTION RELAY VALVES. IN EXTREMELY COLD CONDITIONS, THE BENDIX RELAY VALVES MAY POTENTIALLY DEVELOP INTERNAL LEAKAGE. INTERNAL LEAKAGE CAN LEAD TO AIR PRESSURE BEING DELIVERED TO AFFECTED PRIMARY OR SECONDARY BRAKE CAUSING CONTINUOUS BRAKE APPLICATION. Built 2010-12-03 to 2011-12-20.
11V2640002011-05-03. SERVICE BRAKES, AIR:ANTILOCK:CONTROL UNIT/MODULE. FORD IS RECALLING CERTAIN MODEL YEAR 2011 F-650 AND F-750 TRUCKS, EQUIPPED WITH AIR BRAKES AND A TRAILER PACKAGE OR TRACTOR PACKAGE, FOR AN INCORRECTLY PROGRAMMED ABS MODULE. AS SUCH, THESE VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 121, "AIR BRAKE SYSTEMS (ABS)." Built 2010-12-10 to 2011-03-02.
Canada: Transport Canada, as of 2026-10-19
20194202019-08-21. Other. Issue: This recall is for aftermarket replacement rear window glass produced by Vitro Automotriz. Certain rear window glass may not have been properly tempered. If the window breaks, the glass may separate into large pieces instead of very small ones. Note: This is a voluntary recall that is not being conducted under the requirements of the Motor Vehicle Safety Act. Safety Risk: Glass that breaks in to large pieces could create a risk of injury. Corrective Actions: The company will notify consumers by mail and instruct them to inspect the designation code marked on the rear window glass. Products affected by this recall have the designation “DOT 287” along with the lettering “VMR” (Replacement Market) and a date code that is before July 2019. This information is printed on the bottom corner of the glass. Consumers should contact Vitro's customer service at 1-412-995-6457 or argbacklites@vitro.com to arrange for replacement of the glass.
20153772015-08-18. Seats And Restraints. Certain vehicles equipped with a 70/30 fixed passenger bench seat may fail to conform to Canada Motor Vehicle Safety Standard 210 – Seat Belt Assembly Anchorages. The floor attachment locations for the 70% front passenger and center seat belt anchorages are outside of the parameters specified by the Standard. An improperly positioned seat belt anchorage may reduce the seat belt’s ability to properly restrain the occupant during a crash, increasing the risk of personal injury. Correction: Dealers will install safety restraint anchorage point relocation bracket kits.
20123242012-09-28. Lights And Instruments. Certain vehicles fail to conform to Canada Motor Vehicle Safety Standard 105 - Hydraulic and Electric Brake Systems. On subject vehicles, the parking brake telltale lamp does not illuminate when the key is in the "on" or "start" positions. Correction: Due to the inconsequential nature of this non-compliance, no action will be taken.
20120852012-03-02. Brakes. On certain trucks equipped with Bendix ATR-6 Antilock Traction Relay valves, in extremely cold conditions (at or below -18 degrees Celsius), internal ATR valve leakage can occur. This could cause unintended brake application, which could overheat the affected brakes and cause a fire. Also, in certain low traction conditions, unexpected brake application can cause a loss of vehicle control and a crash. These issues could result in property damage and/or personal injury. Correction: Dealers will update the cover assembly on the ATR valves.
20111752011-04-27. Brakes. Certain vehicles fail to comply with the requirements of Canada Motor Vehicle Safety Standard 121 - Air Brake Systems. The Antilock Brake System (ABS) module may have been incorrect programmed during vehicle assembly. As such, the trailer ABS fault indicator lamp may not illuminate if a trailer ABS fault occurs. A driver who is unaware that the trailer ABS is not functioning could lose control of the trailer under hard braking, which could result in a crash causing property damage and/or personal injury. Correction: Dealers will replace the ABS module.

A campaign lists a year, a make and a model, and often only some of the vehicles built. A list with nothing on it is not a clearance either. The lookups below check one VIN.

Check one vehicle officially

Contains information licensed under the Open Government Licence – Canada.