WenmarOpen by Wenmar Pro

Service bulletins for the 2016 Ford C-max

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

140 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Electrical system are shown. Show all

Bulletins, newest first
SSM 468482017-10-21. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. Some owners of 2016-2017 Ford and Lincoln vehicles equipped with SYNC 3 may experience inoperative mobile device navigation applications. Mobile device navigation via AppLink requires SYNC 3 version 2.3 or higher for Apple iOS users. Mobile device navigation via AppLink is not currently available for Android users. SYNC 3 software upgrades to support these apps are not currently available, do not attempt any repairs at this time. Engineering is investigating, monitor OASIS for updates. SYNC 3 software upgrade to support these apps is not a warrantable repair per the Warranty And Policy Manual, Section 3, Warranty Coverages SYNC.
SSM 468342017-10-21. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. Some 2016-2017 Ford and Lincoln vehicles with SYNC 3 may exhibit an intermittent blue or black screen. Check for SYNC software update under the OASIS Tab SYNC selection. If update is available refer to WSM, Section 415-00 and update APIM software. After Installation Complete pop-up appears, remove USB flash drive and install into IDS tool to update Ford database. Perform a complete ignition cycle by turning the key off for 5 minutes which is critical for a successful installation. If no updates are available or a blue or black screen is present after an update refer to WSM, Section 415-00 for diagnosis or SYNC 3 intermittent blank screen GSB for tips. For claiming, use causal part 14G371 and applicable labor operations in section 10 of the SLTS manual.
SSM 468132017-10-21. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. Some 2016-2017 Ford and Lincoln vehicles equipped with SYNC 3 version 2.2 software may exhibit a blank screen after attempting to exit Valet mode. To recover the screen, perform a complete ignition cycle (key off, open and close the driver's door then wait 5 minutes). The SYNC software version of the vehicle can be confirmed via OASIS. Do not attempt any repairs at this time. Engineering is investigating; Monitor OASIS for updates.
16B35-S12017-08-01. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRICAL SYSTEM:SOFTWARE. Certain 2016-2017 Model Year C-MAX and Fusion Energi Vehicles - Reprogram Powertrain Control Module
SSM 460732017-08-01. Service bulletin. EQUIPMENT:ELECTRICAL; ELECTRICAL SYSTEM. Some 2016-2017 Escape, MKC, Fiesta, F150, Expedition, Navigator, Mustang, Transit, Focus, C-Max, MKX, Taurus, MKS, Flex, MKT, and Edge and 2017 Explorer, Fusion, MKZ, Super Duty, Transit Connect and Continental vehicles equipped with SYNC 3 might exhibit a blank screen or other various SYNC symptoms only when the vehicle is in Transport mode. Engineering is aware of this possibility and it is considered normal due to the power saving features enabled while in transportation mode. It is beneficial to extended battery life to keep the vehicle in Transport Mode until the vehicle is prepped for sale. If the vehicle should exhibit a blank screen or other SYNC symptoms after it has been taken out of Transport mode, refer to Workshop Manual, Section 415-00 for normal diagnosis. The SYNC version can be confirmed via OASIS.
SSM 460482017-08-01. Service bulletin. ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM. Some 2016-2017 Ford and Lincoln vehicles equipped with SYNC 3 may have DTCs U3000:04, B108E:12 and/or U1A00:87 present in the APIM. If these DTCs are present and no other symptoms are reported by the customer, then clear the DTCs and retest. If the DTC(s) do not return then no further repairs should be attempted. If one or more DTCs return as current faults and/or the customer reports other symptoms, then refer to Workshop Manual, Section 415-00 for further diagnostics. The SYNC version can be confirmed via OASIS.
SSM 465342017-08-01. Service bulletin. ELECTRICAL SYSTEM. Some 2013-2017 Fusion Hybrid Energi built on or before 24-Mar-2017, 2012-2016 Focus Electric and 2013-2016 C-MAX Energi and equipped with a TCU may exhibit inoperative remote features via MyFord Mobile app, discharged battery, incomplete user authorization and/or accessory protocol interface module (APIM) DTC U0198 with no modem electronic serial number (ESN) displayed. To correct, perform any open TCU field service actions (FSAs). If U0198 DTC remains, remove the TCU fuse for 5 minutes then reinstall prior to programming. Reprogram the TCU using Integrated Diagnostic System (IDS) release 104.05 or higher. An internet connection is required. Calibration files may also be obtained at www.motorcraftservice.com. For claiming, use causal part 14G229 and applicable labor operations in section 10 of the SLTS manual.
SSM 464862017-05-24. Service bulletin. ELECTRICAL SYSTEM:12V/24V/48V BATTERY. SOME 2016-2017 FORD OR LINCOLN VEHICLES EQUIPPED WITH SYNC 3 MAY EXHIBIT A BLANK SCREEN OR OTHER VARIOUS SYNC SYMPTOMS ONLY WHEN THE VEHICLE IS IN TRANSPORT MODE. THIS IS CONSIDERED NORMAL DUE TO THE POWER SAVING FEATURES ENABLED WHILE IN TRANSPORT MODE. IT IS BENEFICIAL FOR BATTERY LIFE TO KEEP THE VEHICLE IN TRANSPORT MODE UNTIL THE VEHICLE IS PREPPED FOR SALE. TO PREVENT A SYNC SYSTEM LOCKUP DURING TRANSPORT MODE DEACTIVATION, FOLLOW THE WORKSHOP MANUAL (WSM) PROCEDURE EXACTLY ALLOWING TIME FOR THE SYNC SYSTEM TO COMPLETE ITS TASKS SUCH AS FULLY BOOTING UP OR POWERING DOWN AND SHUTTING OFF BEFORE MOVING TO THE NEXT STEP OF THE PROCEDURE. IF THE VEHICLE EXHIBITS A BLANK SCREEN OR SYNC SYMPTOMS AFTER TRANSPORT MODE DEACTIVATION, REFER TO WSM, SECTION 415-00 FOR NORMAL DIAGNOSIS. THE SYNC VERSION CAN BE CONFIRMED VIA OASIS.
SSM 461762017-03-20. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. SOME 2016 C-MAX AND FOCUS ELECTRIC VEHICLES MAY EXHIBIT A FALSE ACTIVATION OF THE ALARM SYSTEM. A WORK AROUND UNTIL THE SOFTWARE IS UPDATED(4TH QTR. 2016), PROCEDURE IS AVAILABLE. 1. PUT THE VEHICLE IN PARK. 2. TAKE YOUR FOOT OFF THE BRAKE PEDAL AND KEEP IT OFF. 3. TURN THE VEHICLE OFF (PUSH BUTTON START/STOP. 4.EXIT VEHICLE AND LOCK THE DOORS TO ACTIVATE THE ALARM. NOTE: IF THE BRAKE IS TOUCHED AFTER TURNING THE KEY OFF THEN JUST TURN THE CAR ON AGAIN AND START THIS PROCEDURE AGAIN.
SSM 463712017-03-20. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. SOME 2012-2017 FOCUS ELECTRIC/2013-2017 CMAX ENERGI/FUSION ENERGI/2015-2017 MKC/MKZ/2016-2017 MKX AND 2017 CONTINENTAL VEHICLES OPERATING WITH A 3G TCU ON OR BEFORE 16-JAN-2017 MAY NOT RESPOND TO CUSTOMERS REMOTE COMMANDS VIA MYLINCOLN/MYFORD MOBILE PHONE APPLICATIONS. 2G NETWORKS WERE DECOMMISSIONED ON 16-JAN-2017. IF THE 3G TCU WAS OPERATING ON A 2G NETWORK, IT WILL NOT AUTOMATICALLY ATTEMPT TO RECONNECT TO THE REPLACEMENT 3G NETWORK. TO CORRECT, RESET THE TCU BY REMOVING ITS POWER FUSE FOR 5 MINUTES. IF THE CONCERN IS STILL PRESENT, FOLLOW NORMAL DIAGNOSTICS IN WORKSHOP MANUAL (WSM), SECTION 415-00. REFER TO PTS OASIS HOME PAGE FOR TCU VERSION IDENTIFICATION. FOR CLAIMING, USE CAUSAL PART 14G229 AND APPLICABLE LABOR OPERATIONS IN SECTION 10 OF THE SERVICE LABOR TIME STANDARDS (SLTS) MANUAL.
SSM 463682017-03-20. Service bulletin. ELECTRICAL SYSTEM:12V/24V/48V BATTERY. SOME 2016 C-MAX ENERGI/FOCUS ELECTRIC AND 2016-2017 FUSION ENERGI VEHICLES BUILT ON OR BEFORE 10-JUL-2016, MAY EXHIBIT A 12-VOLT AND/OR HIGH VOLTAGE BATTERY WITH A LOW STATE OF CHARGE AND/OR AN INTERMITTENT BATTERY DRAW. REPROGRAM THE TELEMATICS CONTROL UNIT (TCU) TO THE LATEST LEVEL USING IDS RELEASE 104.01 OR HIGHER. MAKE SURE YOU ARE CONNECTED TO THE INTERNET WHEN ENTERING MODULE PROGRAMMING TO OBTAIN THE LATEST UPDATES. CALIBRATION FILES MAY ALSO BE OBTAINED AT WWW.MOTORCRAFTSERVICE.COM. FOR CLAIMING, USE CAUSAL PART 14G229 AND APPLICABLE LABOR OPERATIONS IN SECTION 10 OF THE SERVICE LABOR TIME STANDARDS (SLTS) MANUAL.
TSB 17-00152017-03-17. Service bulletin. ELECTRICAL SYSTEM:STARTER ASSEMBLY. SOME 2013-2016 C-MAX ENERGI VEHICLES MAY EXHIBIT AN INTERMITTENT STALL/NO CRANK WITH A STOP SAFELY NOW WARNING MESSAGE IN THE INSTRUMENT PANEL CLUSTER (IPC), ILLUMINATED MALFUNCTION INDICATOR LAMP (MIL) WITH BATTERY ENERGY CONTROL MODULE (BECM) DIAGNOSTIC TROUBLE CODES (DTCS) U3012, P0B37 AND/OR SECONDARY ON-BOARD DIAGNOSTIC MODULE-C (SOBDM-C) P0A0A. FOLLOW THE SERVICE PROCEDURE STEPS TO CORRECT THE CONDITION.
SSM 463472017-03-15. Service bulletin. ELECTRICAL SYSTEM:12V/24V/48V BATTERY. SOME 2016 FOCUS BATTERY ELECTRIC VEHICLE (BEV) AND C-MAX ENERGI PLUG-IN HYBRID VEHICLES (PHEV) EQUIPPED WITH SYNC3 MAY BE UNABLE TO CHANGE THE SETTINGS FOR THE CHARGE PORT LIGHT RING UNDER VEHICLE SETTINGS FUNCTION. THIS MAY BE DUE TO THE GATEWAY MODULE (GWM) CONFIGURATION, DEFAULTING TO ALWAYS ON. REPROGRAM THE GWM TO THE LATEST LEVEL USING IDS RELEASE 103.05A OR HIGHER. MAKE SURE YOU ARE CONNECTED TO THE INTERNET WHEN ENTERING MODULE PROGRAMMING TO OBTAIN THE LATEST UPDATES. FOR CLAIMING, USE CAUSAL PART 14G229 AND APPLICABLE LABOR OPERATIONS IN SECTION 10 OF THE SERVICE LABOR TIME STANDARDS (SLTS) MANUAL.
SSM 463232017-03-15. Service bulletin. ELECTRICAL SYSTEM. SOME 2016 C-MAX AND FOCUS ELECTRIC VEHICLES BUILT ON OR AFTER 11-MAY-2016 MAY EXHIBIT A FALSE ACTIVATION OF THE ALARM SYSTEM. REPROGRAM THE BODY CONTROL MODULE (BCM) TO THE LATEST LEVEL USING INTEGRATED DIAGNOSTIC SYSTEM (IDS) RELEASE 103.03 OR HIGHER. TO CORRECT THE CONCERN MAKE SURE YOU ARE CONNECTED TO THE INTERNET WHEN ENTERING MODULE PROGRAMMING TO OBTAIN THE LATEST UPDATES. USE THE APPLICABLE LABOR OPERATION IN SECTION 10 OF THE SERVICE LABOR TIME STANDARDS MANUAL AND CAUSAL PART 14A068 WHEN CLAIMING REPAIR. CALIBRATION FILES MAY ALSO BE OBTAINED AT WWW.MOTORCRAFTSERVICE.COM
SSM 462982017-03-15. Service bulletin. ELECTRICAL SYSTEM:12V/24V/48V BATTERY. THE EV RANGE AFTER FULLY CHARGING A 2012-2016 FOCUS ELECTRIC, 2013-2016 C-MAX/FUSION ENERGI MAY VARY AFTER EACH CHARGING EVENT. THE WINDOW STICKER INDICATES 0-19 MILE RANGE FOR 2013-2016 CMAX/FUSION ENERGI. VARIATION OF EV RANGE MAY NOT INDICATE A BATTERY OR CHARGING CONCERN. EV RANGE IS SIMILAR TO THE DTE DISPLAY ON GASOLINE VEHICLES, EV RANGE WILL VARY WITH DRIVING/OPERATING CONDITIONS. CONDITIONS INCLUDE: EXTREME OUTSIDE TEMPERATURES, TERRAIN, DRIVING STYLE, CITY OR HIGHWAY DRIVING, TIRE PRESSURE, AND USE OF ACCESSORIES. IF THE CUSTOMER REPLACES THE LOW ROLL RESISTANCE TIRES WITH A MORE AGGRESSIVE TREAD THE RANGE WILL SUFFER. USING THE CABIN HEATER AND A/C, WHICH ARE ELECTRIC, WILL ALSO DECREASE EV RANGE. TO TEMPORARILY REMOVE THE IMPACT OF DRIVING/CLIMATE HISTORY, RESET THE LIFETIME SUMMARY OR DRIVING HISTORY BY USING THE SETTINGS MENU ON THE LEFT SIDE OF THE INSTRUMENT CLUSTER, UNDER DISPLAY
SSM 460322017-02-23. Service bulletin. ELECTRICAL SYSTEM. SOME 2016 C-MAX AND FOCUS ELECTRIC VEHICLES MAY EXHIBIT A FALSE ACTIVATION OF THE ALARM SYSTEM. A WORK AROUND UNTIL THE SOFTWARE IS UPDATED(4TH QTR. 2016), PROCEDURE IS AVAILABLE. 1. PUT THE VEHICLE IN PARK. 2. TAKE YOUR FOOT OFF THE BRAKE PEDAL AND KEEP IT OFF. 3. TURN THE VEHICLE OFF (PUSH BUTTON START/STOP. 4.EXIT VEHICLE AND LOCK THE DOORS TO ACTIVATE THE ALARM. NOTE: IF THE BRAKE IS TOUCHED AFTER TURNING THE KEY OFF THEN JUST TURN THE CAR ON AGAIN AND START THIS PROCEDURE AGAIN.
SSM 460112017-02-22. Service bulletin. VISIBILITY:POWER WINDOW DEVICES AND CONTROLS; EQUIPMENT; ELECTRICAL SYSTEM. SOME 2015-2017 FOCUS/C-MAX/ESCAPE VEHICLES EQUIPPED WITH ONE TOUCH UP FEATURE. THE 2016-2017 WORKSHOP MANUAL SECTION 501-11 WAS UPDATED 8/2016 WITH REVISED DIAGNOSTICS, THE 2015 WSM UPDATES WILL FOLLOW LATER. REFER TO THE 2016-2017 WSM REVISED DIAGNOSTICS FOR ANY OF THE FOLLOWING CONCERNS: ONE-TOUCH UP FEATURE IS INOPERATIVE, WINDOW DOOR GLASS DOES NOT TRAVEL FULLY TO EITHER OPEN/CLOSED POSITION,AND WINDOW BOUNCES BACK CONCERNS. AT THE BEGINNING OF PINPOINT TEST E, CARRY OUT THE INITIALIZATION PROCEDURE ON THE SUSPECT POWER WINDOW, BEFORE CONTINUING THE PINPOINT TEST. REFER TO: POWER DOOR WINDOW INITIALIZATION - VEHICLES WITH: ONE-TOUCH OPEN AND CLOSE FRONT WINDOWS (501-11 GLASS, FRAMES AND MECHANISMS, GENERAL PROCEDURES).
SSM 459682017-02-21. Service bulletin. ELECTRICAL SYSTEM. SOME 2016 ESCAPE/MKC/FIESTA/F150/EXPEDITION/NAVIGATOR/MUSTANG /TRANSIT/FOCUS/C-MAX/MKX/TAURUS/MKS/FLEX/MKT/EDGE AND 2017 ESCAPE/EXPLORER/MKC/FUSION AND MKZ VEHICLES EQUIPPED WITH SYNC 3 MIGHT EXHIBIT A BLANK SCREEN OR OTHER VARIOUS SYNC SYMPTOMS ONLY WHEN THE VEHICLE IS IN TRANSPORT MODE. ENGINEERING IS AWARE OF THIS POSSIBILITY AND IT IS CONSIDERED NORMAL DUE TO THE POWER SAVING FEATURES ENABLED WHILE IN TRANSPORTATION MODE. IT IS BENEFICIAL TO EXTENDED BATTERY LIFE TO KEEP THE VEHICLE IN TRANSPORT MODE UNTIL THE VEHICLE IS PREPPED FOR SALE. IF THE VEHICLE SHOULD EXHIBIT A BLANK SCREEN OR OTHER SYNC SYMPTOMS AFTER IT HAS BEEN TAKEN OUT OF TRANSPORT MODE, REFER TO WORKSHOP MANUAL, SECTION 415-00 FOR NORMAL DIAGNOSIS. THE SYNC VERSION CAN BE CONFIRMED VIA OASIS.
SSM 459392017-02-13. Service bulletin. ELECTRICAL SYSTEM. SOME 2016 C-MAX ENERGI AND FOCUS ELECTRIC VEHICLE BUILT ON OR BEFORE 4/18/2016, MAY HAVE 12-VOLT AND/OR HIGH VOLTAGE BATTERY WITH A LOW STATE OF CHARGE AND/OR AN INTERMITTENT BATTERY DRAW. REPROGRAM THE TELEMATICS CONTROL UNIT (TCU) TO THE LATEST CALIBRATION USING IDS RELEASE 101.02 OR HIGHER. MAKE SURE YOU ARE CONNECTED TO THE INTERNET WHEN ENTERING MODULE PROGRAMMING TO OBTAIN THE LATEST UPDATES. CALIBRATION FILES MAY ALSO BE OBTAINED AT WWW.MOTORCRAFTSERVICE.COM. USE CAUSAL PART 14G229 AND 12561D04 LABOR OPERATIONS IN SECTION 10 OF THE SERVICE LABOR TIME STANDARDS (SLTS) MANUAL.
SSM 459182017-02-11. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM. SOME 2016-2017 FORD/LINCOLN VEHICLES WITH SYNC 3 MAY SEE A NAVIGATION FAULT MESSAGE APPEAR ON THE MAP ON THE HOME SCREEN OR A SYSTEM LOCK UP WHEN THE PHONE IS CONNECTED. APPLINK MAYBE INOPERATIVE, OR THE SYSTEM MAY PERFORM RANDOM REBOOTS DURING AN IGNITION CYCLE WITH THE PHONE CONNECTED. DETERMINE IF THE CUSTOMER HAS AN ANDROID PHONE WITH THE BASEBALL APPLICATION MLB.COM AT BAT INSTALLED. IF THE CUSTOMER DOES NOT HAVE THIS APPLICATION LOADED THEN PROCEED TO THE WSM, SECTION 415-00 FOR NORMAL DIAGNOSIS. IF THE CUSTOMER DOES HAVE THIS APPLICATION LOADED VERIFY IF THE VERSION IS 5.1.3 OR LOWER ON THE ANDROID PHONE. IF THE ANDROID PHONE WITH MLB.COM AT BAT HAS VERSION 5.1.3 OR LOWER PLEASE RECOMMEND THAT THEY UPDATE THEIR APP TO VERSION 5.2 OR HIGHER AND RETEST FOR THE CUSTOMER SYMPTOM. THE SYNC VERSION CAN BE CONFIRMED VIA OASIS.
SSM 459172017-02-10. Service bulletin. EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM); ELECTRICAL SYSTEM. SOME 2016-2017 VEHICLES EQUIPPED WITH SYNC 3 MAY EXPERIENCE THE FOLLOWING CONCERNS; THE GPS NOT TRACKING THE VEHICLE POSITION CORRECTLY, THE VEHICLE LOCATION ARROW ICON SPINNING IN CIRCLES ON THE NAVIGATION SCREEN OR A SPINNING COMPASS ON NON-NAVIGATION VEHICLES. PERFORM THE FOLLOWING PROCEDURE TO RESOLVE. ENTER BEZEL DIAGNOSTICS PER WORK SHOP MANUAL (WSM) SECTION 415-00. SELECT TESTING SETTINGS FROM THE MENU. SCROLL DOWN AND PRESS CLEAR DR CALIB. PERFORM A DRIVE TEST FOR APPROXIMATELY 10 MINUTES, INCLUDE AT LEAST FOUR RIGHT TURNS AND FOUR LEFT TURNS WITH A VEHICLE SPEED OF AT LEAST 25 MPH. CONFIRM THAT GPS POSITION FOR NAVIGATION OR THE COMPASS FOR NON-NAVIGATION VEHICLES IS FUNCTIONING PROPERLY. ENGINEERING IS AWARE OF THIS CONCERN. THE SYNC VERSION CAN BE CONFIRMED VIA OASIS. MONITOR OASIS FOR FUTURE UPDATES.
SSM 459162017-02-10. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT. SOME 2016 FORD AND LINCOLN VEHICLES EQUIPPED WITH SYNC 3 AND NAVIGATION ALONG WITH A VALID PAID SUBSCRIPTION TO SIRIUS TRAVEL LINK MAY NOT DISPLAY SIRIUS TRAVEL LINK FUEL PRICES. REPLACING COMPONENTS WILL NOT RESOLVE THE CONDITION AND IS NOT RECOMMENDED AT THIS TIME. ENGINEERING IS CURRENTLY INVESTIGATING. IN THE INTERIM, THE FOLLOWING STEPS WILL RESET THE SYSTEM. POSITION THE VEHICLE OUTDOORS IN OPEN SKY. DISCONNECT THE BATTERY FOR 5 MINUTES. RECONNECT THE BATTERY AND START THE VEHICLE. SELECT SIRIUS TRAVEL LINK THEN FUEL PRICES. FUEL PRICE INFORMATION MAY NOT DISPLAY FOR UP TO 15 MINUTES WHILE THE SYSTEM IS UPDATING. THE SYNC VERSION CAN BE CONFIRMED VIA OASIS. MONITOR OASIS FOR FUTURE UPDATES.
TSB16-01002017-02-10. Service bulletin. ELECTRICAL SYSTEM. SOME 2017 FUSION PLUG-IN HYBRID ELECTRIC VEHICLE (PHEV) BUILT ON 5/9/2016 AND THROUGH 6/14/2016 AND 2016 C-MAX PHEV VEHICLES BUILT ON 4/27/2016 AND THROUGH 6/14/2016 MAY EXHIBIT A NO-START CONDITION, ILLUMINATED MALFUNCTION INDICATOR LAMP (MIL) WITH DIAGNOSTIC TROUBLE CODE (DTC) P0AA4. REPROGRAM THE POWERTRAIN CONTROL MODULE (PCM) TO THE LATEST LEVEL USING THE INTEGRATED DIAGNOSTIC SYSTEM (IDS) SOFTWARE 101.02 OR LATER. THE SECONDARY ONBOARD DIAGNOSTIC MODULE C (SOBDMC) WILL AUTOMATICALLY UPDATE IF IT IS NOT AT THE LATEST CALIBRATION LEVEL. MAKE SURE YOU ARE CONNECTED TO THE INTERNET WHEN ENTERING MODULE PROGRAMMING TO OBTAIN THE LATEST UPDATES. CALIBRATION FILES MAY ALSO BE OBTAINED AT WWW.MOTORCRAFTSERVICE.COM.
SSM 461642017-02-09. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. SOME 2016 C-MAX BUILT ON 1-MAY-2016 AND THROUGH 6-SEP-2016, MAY EXHIBIT A FALSE ACTIVATION OF THE ALARM SYSTEM. THIS MAY BE DUE TO A CHANGE IN THE BODY CONTROL MODULE (BCM) SOFTWARE. REPROGRAM THE BCM TO THE LATEST CALIBRATION USING IDS RELEASE 102.05 OR HIGHER. MAKE SURE YOU ARE CONNECTED TO THE INTERNET WHEN ENTERING MODULE PROGRAMMING TO OBTAIN THE LATEST UPDATES. CALIBRATION FILES MAY ALSO BE OBTAINED AT WWW.MOTORCRAFTSERVICE.COM. USE CAUSAL PART 14A068 AND APPLICABLE LABOR OPERATIONS IN SECTION 10 OF THE SLTS MANUAL.
SSM 461082017-02-04. Service bulletin. ELECTRICAL SYSTEM:STARTER ASSEMBLY. SOME 2013-2016 C-MAX PHEV VEHICLES MAY EXHIBIT AN INTERMITTENT STALL/NO CRANK WITH A STOP SAFELY NOW WARNING MESSAGE IN THE INSTRUMENT PANEL CLUSTER (IPC) WITH BATTERY ENERGY CONTROL MODULE (BECM) DTCS U3012,P0B37, AND/OR SECONDARY ON-BOARD DIAGNOSTIC MODULE C(SOBDMC) P0A0A. INSPECT LOW VOLTAGE INTERLOCK CIRCUITS, CYB03 AND CYB04 FOR AN INTERMITTENT SHORT TO GROUND. INSPECT THE CIRCUITS FOR WIRE CHAFING ON THE 10B689 HARNESS NEAR C4002 BETWEEN THE TRACTION BATTERY COVER PLATE AND THE TRACTION BATTERY, REMOVE THE AFFECTED CIRCUIT FROM THE CONNECTOR, APPLY HEAT SHRINK TUBING OVER THE CHAFED AREA OF THE CIRCUIT AND APPLY ANTI-ABRASION TAPE. SECURE THE 10B689 HARNESS TO PREVENT REPEAT OCCURRENCE. USE APPLICABLE LABOR OPERATIONS FROM SECTION 10 OF THE SERVICE LABOR TIME STANDARDS (SLTS) MANUAL.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.