WenmarOpen by Wenmar Pro

Service bulletins for the 2019 Fiat 500X

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

97 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Bulletins, newest first
S20080000102020-08-24. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM:SOFTWARE; ELECTRICAL SYSTEM. Apple Carplay Inoperative Or Not Working, Phone Not Pairing, Carplay Lockup, Freeze or Audio Concerns
18-029-20 REV. A2020-06-22. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRICAL SYSTEM; ENGINE. Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following DiagnosticTrouble Code (DTC) has been set:U0100 - Lost Communication With ECM/PCM. In addition, the customer may also experience the following: The vehicle will not crank if the ECM gets hotter than 50 °C (122°F).
23-015-202020-05-26. Service bulletin. STRUCTURE; EQUIPMENT. Disinfectant Solution Recommended for COVID-19
08-049-202020-05-26. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT. Charging System, Battery Diagnostic Tools and Warranty This information only bulletin discusses using the correct test equipment for testing batteries and charging systems, and also warranty reimbursement when battery replacements are necessary.
18-039-202020-05-26. Service bulletin. FUEL SYSTEM, GASOLINE. Possible Driveability Issues due to the Winter-Blend Fuel into the Warmer Season
S20190000022020-05-26. Service bulletin. STEERING. Hands On Steering Wheel Message In EVIC
21-027-202020-05-26. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN; EXTERIOR LIGHTING. Flash: Transmission Control Module (TCM) Updates This bulletin involves reprogramming the TCM with the latest available software. Some customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation, a technician may find oneor more of the following Diagnostic Trouble Codes (DTCs) have been set:P0780 - Gear Shift Malfunction. P1DD2-00 - Torque Request Signal From TCM Denied. Customers or technicians may experience the following:Transmission will be placed into Limp-in mode. While driving at 65 kph (40 mph) a bump will be felt and the RPM will jumpto 4000 RPM.
18-029-202020-05-26. Service bulletin. ELECTRICAL SYSTEM; EXTERIOR LIGHTING. Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following DiagnosticTrouble Code (DTC) has been set:U0100 - Lost Communication With ECM/PCM. In addition, the customer may also experience the following:The vehicle will not crank if the ECM gets hotter than 50 °C (122 °F).
09-004-202020-05-26. Service bulletin. ENGINE AND ENGINE COOLING. No Weep Hole In Muffler Assembly This bulletin involves drilling a weep hole in the muffler assembly. The customer may describe a crank, no start condition, in freezing temperatures. This condition can be caused by condensation freezing in the muffler assembly.
21-027-202020-05-18. Service bulletin. POWER TRAIN; ELECTRICAL SYSTEM; EXTERIOR LIGHTING. Flash: Transmission Control Module (TCM) Updates This bulletin involves reprogramming the TCM with the latest available software. Some customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation, a technician may find oneor more of the following Diagnostic Trouble Codes (DTCs) have been set:P0780 - Gear Shift Malfunction. P1DD2-00 - Torque Request Signal From TCM Denied. Customers or technicians may experience the following:Transmission will be placed into Limp-in mode. While driving at 65 kph (40 mph) a bump will be felt and the RPM will jumpto 4000 RPM.
18-029-202020-05-18. Service bulletin. EXTERIOR LIGHTING; ELECTRICAL SYSTEM. Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following DiagnosticTrouble Code (DTC) has been set:U0100 - Lost Communication With ECM/PCM. In addition, the customer may also experience the following:The vehicle will not crank if the ECM gets hotter than 50 °C (122 °F).
09-004-202020-05-18. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE. No Weep Hole In Muffler Assembly This bulletin involves drilling a weep hole in the muffler assembly. The customer may describe a crank, no start condition, in freezing temperatures. This condition can be caused by condensation freezing in the muffler assembly.
21-027-202020-04-27. Service bulletin. POWER TRAIN; ELECTRICAL SYSTEM; EQUIPMENT ADAPTIVE/MOBILITY. Flash: Transmission Control Module (TCM) Updates This bulletin involves reprogramming the TCM with the latest available software. Some customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation, a technician may find one or more of the following Diagnostic Trouble Codes (DTCs) have been set: P0780 - Gear Shift Malfunction. P1DD2-00 - Torque Request Signal From TCM Denied. Customers or technicians may experience the following: Transmission will be placed into Limp-in mode. While driving at 65 kph (40 mph) a bump will be felt and the RPM will jump to 4000 RPM.
18-029-202020-04-27. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ENGINE. Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following DiagnosticTrouble Code (DTC) has been set:U0100 - Lost Communication With ECM/PCM. In addition, the customer may also experience the following:The vehicle will not crank if the ECM gets hotter than 50 °C (122 °F).
09-004-202020-04-27. Service bulletin. ENGINE AND ENGINE COOLING; ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE. No Weep Hole In Muffler Assembly This bulletin involves drilling a weep hole in the muffler assembly. The customer may describe a crank, no start condition, in freezing temperatures. This condition can be caused by condensation freezing in the muffler assembly.
S20080000132020-04-06. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT. Key Programming, Security Pin Request, Pin Invalid
S20080000102020-04-06. Service bulletin. EQUIPMENT. Apple Carplay Inoperative Or Not Working, Phone Not Pairing, Carplay Lockup Or Freeze.
31-005-192019-12-16. Service bulletin. EQUIPMENT; STRUCTURE. Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
31-004-192019-12-16. Service bulletin. VISIBILITY. Authentic Mopar® Glass Replacement This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the recommended usage of Authentic Mopar® Glass.
18-089-192019-12-16. Service bulletin. FUEL SYSTEM, GASOLINE; ENGINE. wiTECH Small Leak Verification Test (SLVT) - P0456-EVAP SYSTEM SMALL LEAK
90041502019-12-02. Service bulletin. FUEL SYSTEM, GASOLINE; POWER TRAIN. SEAL, Input If looking to replace stubshaft due to ATX fluid leaking, do not replace PTU seals. None of the seals from the PTU side will need to be replaced whenever the ATX stubshaft is replaced, even though V-seal (68408748A$) is in direct contact with the stubshaft, it will not avoid grease/oil leakage from transmission side. PTU V-seals are intended to act as a dust cover for stubshaft - PTU input shaft spline interface. PTU Input shaft seal (68408749A$) is intended to hold PTU oil and debris ingress; it should be replaced only if the fluid leakage is confirmed to be PTU oil and not ATX trans. fluid.
90032202019-10-28. Service bulletin. EQUIPMENT; EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.. RADIO [RES] - New and/or Service Exchange For RES radio concerns. Use the wiTECH 2.0 and inspect the radio part number and serial number under the Radio/ECU Details tab. Please verify that the radio part number and/or serial number is not "FFFF". If either field shows "FFFF", please contact Mike Wielgat at 248-576-6696 or Rohan Negandhi at 248-421-9608 If no response in 15 minutes, proceed with repair.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.