WenmarOpen by Wenmar Pro

Service bulletins for the 2020 Dodge Durango

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

491 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Bulletins, newest first
S20080000142020-04-06. Service bulletin. VISIBILITY; LANE DEPARTURE; BACK OVER PREVENTION. Blind Spot Mirror Indicators And Back-Up Camera Inoperative, DTC?s U0232-00 Lost Communication With Blind Spot Module, U0264-00 Lost Communication With Camera Module
S20080000132020-04-06. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT. Key Programming, Security Pin Request, Pin Invalid
S14080003842020-04-06. Service bulletin. ELECTRICAL SYSTEM. Intelligent Battery Sensor-IBS Installation, Battery Charging Message, Start Stop Charging Warning Lamp Illuminated On Stop Start Equipped Vehicles
S20230000102020-04-06. Service bulletin. STRUCTURE:BODY:HATCHBACK/LIFTGATE; STRUCTURE. Power Lift Gate Opens 1 To 2 Feet Then Closes
S20080000102020-04-06. Service bulletin. EQUIPMENT. Apple Carplay Inoperative Or Not Working, Phone Not Pairing, Carplay Lockup Or Freeze.
90042232020-04-06. Service bulletin. ELECTRICAL SYSTEM:12V/24V/48V BATTERY; ENGINE AND ENGINE COOLING. BATTERY, Auxiliary (180 AMP) Mopar Engineering has reviewed the BBAUA180AA battery due to concerns over fitment in Chrysler, Jeep®, Dodge & Ram vehicles and has provided direction on usage. BBAUA180AA CAN BE USED in the following vehicles equipped with stop/start technology: ?MP ? Jeep Compass ?JL ? Jeep Wrangler ?JT ? Jeep Gladiator ?RU ? Chrysler Pacifica RU NOTE: Modify the BBAUA180AA battery positive mold cover by trimming 3mm of rubber on left side & bottom. ?WK ? Jeep Grand Cherokee ?WD ? Dodge Durango WK/WD NOTE:A vent kit is being created now and will replace the existing tube with a longer one and add an elbow to it for routing (availability is TBD).
08-124-192020-01-21. Service bulletin. EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.. Radio Enhancements This bulletin involves updating the radio software level to 1848.24. Customers may experience one or more of the following: Ghost Touch, features, modes and App?s changing without drivers input. Bluetooth pop noise. Pop message ?SXM Wait? displayed for extended period of time. The radio resets.
08-117-19 REV. A2020-01-21. Service bulletin. ELECTRICAL SYSTEM. Flash: Security Gateway Module (SGW) Enhancements This bulletin involves updating the Security Gateway Module (SGW) with the latest available software. Technicians may notice that the vehicles SGW is not at the latest software level.
90041482020-01-21. Service bulletin. EQUIPMENT. SPEAKER, 6"x9" Right or Left For a buzz squeak rattle (BSR) concern coming from the speaker area that cannot be recreated, the fastener in the armrest pull cup may not be fully torqued. If a customer has concerns about speaker pop or speaker rattle, please enusre that Radios is at latest software level. This fastener, if under torqued, causes the washer to spin and rattle. Please ensure this fastener is secured and washer is not spinning prior to speaker replacement. Additional info: Please verify that there are no loose screws in door pull cup, no bent 6x9 speaker tinsel wire, or audio induced pop/crackle event(non BSR) Please crate and send a copy of the vehicle scan report and specify radio sw version and radio head unit ID to engineers via phone call or email at the following: michael.onyia@fcagroup.com (248) 613-2380 anmol.shergill@external.fcagroup.com (313) 412-0607 matt.berg@fcagroup.com (248) 576- 7754 If no response in 15 minutes, proceed with repair.
08-117-192019-12-16. Service bulletin. ELECTRICAL SYSTEM. Flash: Security Gateway Module (SGW) Enhancements This bulletin involves updating the Security Gateway Module (SGW) with the latest available software. Technicians may notice that the vehicles SGW is not at the latest software level.
18-089-192019-12-16. Service bulletin. FUEL SYSTEM, GASOLINE; ENGINE. wiTECH Small Leak Verification Test (SLVT) - P0456-EVAP SYSTEM SMALL LEAK
18-075-192019-12-02. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. The customer may comment on the following condition: Perceive rough and/or erratic transmission shifting between gears during normal drive cycles.
21-037-192019-12-02. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). Flash: Transmission Control Module (TCM) Updates This bulletin involves reprogramming the TCM with the latest available software. The customer may notice the following condition: Rough and/or erratic shifting between gears during normal drive cycles.
90041502019-12-02. Service bulletin. FUEL SYSTEM, GASOLINE; POWER TRAIN. SEAL, Input If looking to replace stubshaft due to ATX fluid leaking, do not replace PTU seals. None of the seals from the PTU side will need to be replaced whenever the ATX stubshaft is replaced, even though V-seal (68408748A$) is in direct contact with the stubshaft, it will not avoid grease/oil leakage from transmission side. PTU V-seals are intended to act as a dust cover for stubshaft - PTU input shaft spline interface. PTU Input shaft seal (68408749A$) is intended to hold PTU oil and debris ingress; it should be replaced only if the fluid leakage is confirmed to be PTU oil and not ATX trans. fluid.
90041532019-12-02. Service bulletin. ELECTRICAL SYSTEM. 2020 WD SRT F19 Fuse - Correct Part Number If replacing the PDC due to a failed F19 fuse - 20A Max Fuse (Headrest Solenoid), or if looking to replace the F19 fuse, please use MOPAR part number: 68202896AA. Please do not replace the PDC to obtain this fuse. STAR Parts will be corrected in the near future to reflect the correct part number.
04-001-192019-10-28. Service bulletin. ENGINE. Pentastar Upgrade Oil Fill Level after an Oil Change This bulletin involves rechecking the oil fill level after filling the engine to the correct specifications. The customer may describe that after an oil change they check their oil fill level and it is showing overfilled on the oil dipstick.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.