Service bulletins for the 2005 Chrysler 300
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
119 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
Only bulletins with component: Transmission and driveline are shown. Show all
| 9004009 | 2022-09-26. Service bulletin. POWER TRAIN. Transmission Kit with Torque Converter 1. All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter. |
|---|---|
| 9004361 | 2022-09-26. Service bulletin. POWER TRAIN. NAG1 Transmission Before installing the transmission with the engine, check for dowel pins (2) for alignment. If the pins are missing request to add the dowel pin first and then install the transmission |
| 9004009 | 2022-09-26. Service bulletin. POWER TRAIN. Transmission Kit with Torque Converter 1. All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter. |
| 14-002-14 | 2022-08-29. Service bulletin. FUEL SYSTEM, GASOLINE; POWER TRAIN. Engine Stall Immediately Following Fuel Tank Fill-Up (X53 Lifetime Warranty Extension) This bulletin involves replacing the fuel tank with a revised part. Some customers may experience an engine stall condition just after filling the fuel tank. The integral mulit-functional control valve may allow liquid fuel to enter the evaporative emissions system causing a rich fuel condition when the purge system is initiated.. |
| 14-002-14 | 2022-08-22. Service bulletin. POWER TRAIN; FUEL SYSTEM, GASOLINE. Engine Stall Immediately Following Fuel Tank Fill-Up (X53 Lifetime Warranty Extension) This bulletin involves replacing the fuel tank with a revised part. Some customers may experience an engine stall condition just after filling the fuel tank. The integral mulit-functional control valve may allow liquid fuel to enter the evaporative emissions system causing a rich fuel condition when the purge system is initiated.. |
| 08-061-12 | 2022-07-25. Service bulletin. LATCHES/LOCKS/LINKAGES:DOORS:LOCK; ELECTRICAL SYSTEM; VEHICLE SPEED CONTROL; POWER TRAIN; VISIBILITY; LATCHES/LOCKS/LINKAGES. Drivers And/Or Passenger Front Power Door Locks And Windows Inoperative U0200 Lost Communication With Passengers Door Module U0199 Lost Communication With Drivers Door Module This bulletin involves Inspecting the Drivers Door Module (DDM) and/or Passenger Door Module (PDM) and replacing one of both if necessary. The customer may experience any or all of the following conditions: The drivers and/or passenger front power locks and windows are inoperative. will work properly. The Technician may find Diagnostic trouble code (DTC), U0200 Lost communication with Passenger Door Module. The Technician may find Diagnostic trouble code (DTC), U0199 Lost of communication with Drivers Door Module. |
| 9004361 | 2021-04-26. Service bulletin. POWER TRAIN. NAG1 Transmission Before installing the transmission with the engine, check for dowel pins (2) for alignment. If the pins are missing request to add the dowel pin first and then install the transmission |
| 14-002-14 | 2018-06-11. Service bulletin. FUEL SYSTEM, GASOLINE; POWER TRAIN. Engine Stall Immediately Following Fuel Tank Fill-Up (X53 Lifetime Warranty Extension) This bulletin involves replacing the fuel tank with a revised part. Some customers may experience an engine stall condition just after filling the fuel tank. The integral mulit-functional control valve may allow liquid fuel to enter the evaporative emissions system causing a rich fuel condition when the purge system is initiated.. |
| K39 | 2011-06-09. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION. CHRYSLER SERVICE CAMPAIGN: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. SHIFT SPRING BREAKS CAUSING THE SHIFT LEVER TO BE UNABLE TO SHIFT FROM THE 'PARK' POSITION. *RM |
| 0803006 | 2007-03-23. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION. POWERTRAIN CONTROL MODULE INITIALIZATION. *KB |
| 1803506 | 2007-03-23. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION. MALFUNCTION INDICATOR LAMP (MIL) ON FOR P0573. *KB |
| 1800706 | 2006-04-25. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). GENERIC POWERTRAIN CONTROL MODULE (PCM) PROCEDURE. *AK |
| 2101905A | 2005-11-14. Service bulletin. POWER TRAIN:TRANSFER CASE (4-WHEEL DRIVE). TRANSFER CASE SHUDDER. *SC |
| 2101405 | 2005-09-23. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION. CLICKING SOUND FROM REAR OF VEHICLE AFTER ACCELERATING FROM A STOP. *TT |
| 1803105 | 2005-08-19. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). SHIFT HESITATION DURING WIDE OPEN THROTTLE. TO INCLUDE 2005 DODGE CHARGER SRT-8. *TT |
| 2101105 | 2005-05-18. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION. NAG1 (W5A580) TRANSMISSION - SHUDDER WHEN TORQUE CONVERTER CLUTCH ENGAGES. *TT |
| 2100205 | 2005-02-25. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION. TRANSMISSION FLUID MAY BE WICKING IN THE RIGHT FRONT CORNER OF THE TRANSMISSION OIL PAN AREA. *EH |
| 0424 | 2004-11-30. Service bulletin. POWER TRAIN. ALL WHEEL DRIVE A580 TRANSMISSION FAST FEEDBACK PROGRAM. *TT |
| 1800904 | 2004-11-29. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). GENERIC POWERTRAIN CONTROL MODULE (PCM) PROCEDURE. THIS BULLETIN SUPERSEDES BULLETIN 18-009-04 DATED 03/02/2004. *TT |
| 2100904 | 2004-08-19. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). FLASH: TRANSMISSION CONTROL MODULE INITIALIZE EGS-52 PROCEDURE. *MJ |
| 0405 | 2004-05-25. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION. NAG1 TRANSMISSION EQUIPPED VEHICLES WILL BE INVOLVED IN A STAR CENTER TRANSMISSION NEW LAUNCH FEEDBACK PROGRAM. WARRANTY PLANNING & ADMINISTRATION BULLETIN. *TT |
| 0410 | 2004-05-21. Service bulletin. POWER TRAIN:AXLE ASSEMBLY. REAR AXLE NEW LAUNCH FAST FEEDBACK PROGRAM FOR ALL 2005 CHRYSLER 300 SERIES AND DODGE MAGNUM VEHICLES. *TT |
| 04009 | 2004-05-19. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). APPROXIMATELY 260 VEHICLES EQUIPPED WITH A 5.7L ENGINE WERE SHIPPED WITH INCORRECT ENGINE SOFTWARE IN THE POWERTRAIN CONTROL MODULE (PCM) THAT RESULTS IN NON-COMPLIANCE. IT WILL BE NECESSARY TO REPLACE THE PCM. *TT |
| 2100604 | 2004-05-19. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION. SHUDDER DURING SHIFTS. *TT THIS BULLETIN SUPERSEDES BULLETIN 21-006-04 DATED APRIL 27, 2004. *TT |
| 1803303 | 2003-11-11. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). GENERIC POWER TRAIN CONTROL MODULE (PCM) FLASH PROCEDURE. 2004 DURANGO. *TT *MJ |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.