WenmarOpen by Wenmar Pro

Service bulletins for the 2015 Chevrolet Volt

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

1419 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Electrical system are shown. Show all

Bulletins, newest first
20-NA-1322024-04-23. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM. This warranty administration bulletin provides policy information on the requirements for 12V battery testing and warranty replacements.
PIP4845E2024-04-15. Service bulletin. ELECTRICAL SYSTEM. T18 Battery Charge Module.
20-NA-1322024-04-05. Service bulletin. ELECTRICAL SYSTEM; ELECTRICAL SYSTEM:12V/24V/48V BATTERY; ELECTRICAL SYSTEM:SOFTWARE; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; EQUIPMENT. This warranty administration bulletin provides policy information on the requirements for 12V battery testing and warranty replacements.
10-08-45-001H2024-04-05. Service bulletin. ELECTRICAL SYSTEM. This bulletin provides information for electrical ground repairs using new General Motors replacement fasteners with conductive finish.
18-NA-1802024-02-23. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM. This Warranty Administration service bulletin provides Lithium-Ion battery Exchange Process and Transaction Submission information.
18-NA-1802024-02-17. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM. This Warranty Administration service bulletin provides Lithium-Ion battery Exchange Process and Transaction Submission information.
14D1332024-02-12. Service bulletin. ELECTRICAL SYSTEM; FUEL SYSTEM, GASOLINE. Special Return - Fuel Tank Module Kit: ACDelco Part Number M10256 (select date codes)
14061300012024-02-12. Service bulletin. ELECTRICAL SYSTEM. High Voltage Safety ? High Voltage Disabling
PI0592I2024-02-02. Service bulletin. ELECTRICAL SYSTEM. This preliminary information (PI) provides information om Service Programming System (SPS) Error Codes (E4398, E4399, E4403, M4404, M4413, M6954, M6955, E4414, E4423, E4491 or E6961).
PIT5962A2024-01-29. Service bulletin. ELECTRICAL SYSTEM:HAND HEATER:WIRING HARNESS; UNKNOWN OR OTHER. This Preliminary information communicates a GM part number for reflective high temperature heat or insulating tape when repairing wiring harnesses.
18-NA-1802024-01-19. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM. This Warranty Administration Bulletin Provides High Voltage Battery Exchange Process Information.
143952024-01-16. Service bulletin. ELECTRICAL SYSTEM. OnStar® Module Battery Drain
18-NA-1802024-01-13. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM. This Warranty Administration Bulletin Provides High Voltage Battery Exchange Process Information.
PIT5698D2023-12-26. Service bulletin. ELECTRICAL SYSTEM. This Preliminary information communicates additional information on how a LIN bus operates and diagnostic tips when working on a LIN bus.
PIT5074H2023-12-26. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM. J-35616-64B Terminal Test Probe / Replacement Terminal / Terminated Lead.
20-NA-1322023-12-15. Service bulletin. ENGINE AND ENGINE COOLING; EQUIPMENT; ELECTRICAL SYSTEM. This warranty administration bulletin provides policy information on the requirements for 12V battery testing and warranty replacements.
PIT5074H2023-12-11. Service bulletin. ELECTRICAL SYSTEM:12V/24V/48V BATTERY; ELECTRICAL SYSTEM. J-35616-64B Terminal Test Probe / Replacement Terminal / Terminated Lead.
PIT5236B2023-12-04. Service bulletin. ELECTRICAL SYSTEM. OnStar Module Does Not Support All B101D Symptom Codes.
07-08-49-020R2023-10-18. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT; ELECTRICAL SYSTEM:INSTRUMENT PANEL:SPEEDOMETER/ODOMETER. This informational bulletin provides information for the IPC odometer programming method quick reference guide.
19-NA-2422023-09-13. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM. This service bulletin announces the availability of a High Voltage battery pack refurbish kit when the battery pack assembly needs to be replaced and information on how dealers can obtain the refurbish kit.
13-08-116-001I2023-07-13. Service bulletin. ELECTRICAL SYSTEM. The intent of this service bulletin is to identify aftermarket ALDL or DLC interface devices as potential sources for causing multiple customer concerns that do not have other diagnostic methods to identify them.
PIC5650K2023-06-13. Service bulletin. POWER TRAIN; ELECTRICAL SYSTEM:IGNITION. This Preliminary Information communication provides information to the technician about vehicles that have an intermittent no crank, no start, or start stall concern with the security light coming on. Technician may find Diagnostic Trouble Codes B3055, B3060, and/or B3935. Technician should not replace any parts for this concern. If unable to duplicate the concern ask if the customer uses any Radio Frequency Identification Devices when the concern is present. Dealer should also direct their customers to the appropriate section in the Owner manuals that references that the device complies.
PIC6495A2023-05-15. Service bulletin. ELECTRICAL SYSTEM:WIRING. This Preliminary information communicates that the New battery section as a broken wiring harness clip, and to use a Velcor strip to hold the harness in place.
20-NA-1322023-05-03. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING. This warranty administration bulletin provides policy information on the requirements for 12V battery testing and warranty replacements.
PIC6089B2023-04-17. Service bulletin. POWER TRAIN; STRUCTURE; ELECTRICAL SYSTEM; EXTERIOR LIGHTING. This Preliminary Information communication provides information to the technician about vehicles that may have a Battery Saver Message or red Battery Indicator displayed in the Driver Information Center. Technician may find Diagnostic Trouble Code P0AF8 set in history. Technician will need to the 12 volt battery using the GR8 Battery tester. The technician will need to perform the Direct current Power Conversion Test published in Global Service Information to check for maximum current and voltage output. This test requires the use of a Carbon Pyle load tester. In addition, the technician can select the 14V Power Module Control Function in the Engine Control Module and Accessory Power Module Setpoint in the Body Control Module by using the Scan Tool in order to check that the system is able to respond to current loads. If the test fails, if there were low voltage Diagnostic Trouble Codes or P0AF8 was set, the technician should confirm that the 200 amp fuse located in the X50D Fuse Block is torqued to correct specification. Technician should check the voltage on both sides of the 200 amp Fuse while there is a load applied and comparing the voltage readings. Voltage drop can be checked from the positive battery post to the Accessory Power Module side of the 200 amp fuse as well. If the Accessory Power Module will output current under a load but the voltage is low on both sides of the fuse when compared to the voltage output at the Accessory Power Module, check the following Service Information for any other Diagnostic Trouble Codes that may have led to the low voltage condition, Accessory Power Module output terminal is clean and torqued to specification, The Accessory Power Module output cable ring terminal is properly seated to the Accessory Power Module output terminal post and its condition, and test the voltage drop on the ground cables to the engine block, transmission, body and chassis to ensure they are within specification.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.