WenmarOpen by Wenmar Pro

Service bulletins for the 2015 Chevrolet Volt

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

1419 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Driver assistance are shown. Show all

Bulletins, newest first
PIC5611H2023-02-13. Service bulletin. BACK OVER PREVENTION. This Preliminary Information communication provides information to the technician about the rear view camera options on the vehicles equipped with rear view camera. The rear view camera brightness can be adjusted on some models while the transmission is in reverse and using the Menu or Select button. To turn off or on the guidelines in the rear view camera, use the radio display Config icon then Display, then the guidelines option.
070601016G2022-06-13. Service bulletin. BACK OVER PREVENTION. This informational bulletin provides information on Internal Engine Noise or Damage After Oil Filter Replacement.
PIT5698B2021-09-13. Service bulletin. ELECTRICAL SYSTEM:ADAS:BLINDSPOT:SENSORS. This Preliminary information communicates additional information on how a LIN bus operates and diagnostic tips when working on a LIN bus.
PIC6097A2018-12-17. Service bulletin. ELECTRICAL SYSTEM; ELECTRONIC STABILITY CONTROL:AUTOMATIC (ASC). This Preliminary Information communication provides information to the technician for balancing a hybrid battery pack after replacing a battery section. Certain unlisted codes may be experienced when using the battery service tool EL50332. If the codes are experienced check the following before calling Midtronic. Please make sure the USB memory stick is fully inserted into the machine. Make sure to follow the on screen instructions do not hook the machine to the battery section until instructed to do so. The balance machine should be on the latest software version available by following the latest version of preliminary information number PI1125.
PIC5611G2018-08-20. Service bulletin. ELECTRICAL SYSTEM; BACK OVER PREVENTION. This Preliminary Information communication provides information to the technician about the rear view camera options on the vehicles equipped with rear view camera. The rear view camera brightness can be adjusted on some models while the transmission is in reverse and using the Menu or Select button. To turn off or on the guidelines in the rear view camera, use the radio display Config icon then Display, then the guidelines option.
PI0938A2018-06-11. Service bulletin. ELECTRICAL SYSTEM; ELECTRONIC STABILITY CONTROL (ESC). This preliminary bulletin provides information on what labor operation number to use for various electrical/electronic control issues.
060089026N2018-06-04. Service bulletin. ELECTRICAL SYSTEM; VISIBILITY:SUN/MOON ROOF ASSEMBLY; STRUCTURE:BODY:DOOR; POWER TRAIN:TRANSFER CASE (4-WHEEL DRIVE); VISIBILITY:WINDSHIELD; ELECTRONIC STABILITY CONTROL (ESC). This warranty bulletin provides labor operation numbers for customer concerns that cant be duplicated.
PIC5611E2018-05-21. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT; BACK OVER PREVENTION; POWER TRAIN. This Preliminary Information communication provides information to the technician about the rear view camera options on the vehicles equipped with rear view camera. The rear view camera brightness can be adjusted on some models while the transmission is in reverse and using the Menu or Select button. To turn off or on the guidelines in the rear view camera, use the radio display Config icon then Display, then the guidelines option.
PIC5611F2018-05-21. Service bulletin. BACK OVER PREVENTION. This Preliminary Information communication provides information to the technician about the rear view camera options on the vehicles equipped with rear view camera. The rear view camera brightness can be adjusted on some models while the transmission is in reverse and using the Menu or Select button. To turn off or on the guidelines in the rear view camera, use the radio display Config icon then Display, then the guidelines option.
PI14182018-05-07. Service bulletin. BACK OVER PREVENTION; VEHICLE SPEED CONTROL. This preliminary informational bulletin provides repair information for a customer concern of a clunk noise when shifting into Drive or Reverse, or during heavy acceleration.
PI14302018-05-07. Service bulletin. BACK OVER PREVENTION; VISIBILITY:WINDSHIELD. This preliminary informational bulletin provides inspection and repair information for a customer concern of wind noise and/or water present in the left lower corner of windshield.
080730026D2018-05-07. Service bulletin. ELECTRONIC STABILITY CONTROL (ESC). This informational bulletin provides information on Some vehicles may rock or move slightly forward or rearward while in Park at start up after cold soak. This condition may be accompanied by a clunk noise. This is a slight movement that is more often seen visually, rather than felt, when viewed from the outside and using the auto-start feature, if equipped.
16-NA-1072018-04-23. Service bulletin. EQUIPMENT:ELECTRICAL; EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.; BACK OVER PREVENTION: SENSING SYSTEM: CAMERA. This technical bulletin provides a procedure to reprogram the radio to correct a customer concern of radio Inoperative, blue Screen, AM clipping noise, HD on/off status not retained in stations, time lag on transitions, no audio with internal amp, and park assist symbol position wrong in rear view camera.
PIT54602018-01-22. Service bulletin. BACK OVER PREVENTION: CAMERA SYSTEM. This Preliminary Information communication provides information to the technician about vehicles with the rear view camera will be displayed for a longer than usual amount of time. Technician should not replace any parts General Motors is currently evaluating this concern.
PIC61032017-08-15. Service bulletin. ELECTRICAL SYSTEM; SERVICE BRAKES, ELECTRIC; ELECTRONIC STABILITY CONTROL:AUTOMATIC (ASC). This Preliminary Information communication provides information to the technician about vehicles that may have Service Stability Lamp on. Technician may find a current or history Diagnostic Trouble Code C012E and C12FE. Technician should follow Service Information diagnostics for Diagnostic Trouble Code C012E symptom code 00 in the Electronic Brake Control Module or C12FE in the Engine Control Module. If the vehicle has a current or history Diagnostic Trouble Code C012E symptom code 12 without a C012E symptom code 00 in the Electronic Brake Control Module and a C12FE in the Engine Control Module, the code sets due to a powertrain code or a power down issue with the vehicle, this is not related to the brakes. The technician should diagnose other Diagnostic Trouble Codes or issues with the vehicle first.
PIC5611D2017-08-15. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; BACK OVER PREVENTION: CAMERA SYSTEM. This Preliminary Information communication provides information to the technician about the rear view camera options on the vehicles equipped with rear view camera. The rear view camera brightness can be adjusted on some models while the transmission is in reverse and using the Menu or Select button. To turn off or on the guidelines in the rear view camera, use the radio display Config icon then Display, then the guidelines option.
PIC5602B2017-08-15. Service bulletin. BACK OVER PREVENTION: CAMERA SYSTEM; ELECTRICAL SYSTEM. This Preliminary Information communication provides information to the technician to aid in diagnosing a concern of one or all of the following concerns. The customer may state that the reverse lamps are inoperative, the review back up camera is inoperative, and the dome lights are inoperative. Technician may find diagnostic trouble code B2615 set in the Body Control Module. Upon inspection it might be found that the F7DR 7.5 amp fuse is open in the right instrument panel fuse box. After initial inspection a concern can?t be found inspect circuit 6815 going to the drivers and passengers sun visor. It might be required to lower the front part of the headliner to perform the inspection. If a wiring concern is not found move each sun visor up and down and front to back to see if the fuse opens. If the fuse opens replace the sun visor that was being moved when the fuse opened.
10-08-98-002A2017-08-15. Service bulletin. FORWARD COLLISION AVOIDANCE. This information bulletin explains the use of drilling high strength steel in a collision repair and the GM recommended CryoCobalt Drill bit.
PIC5611E2017-08-15. Service bulletin. EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.; BACK OVER PREVENTION: CAMERA SYSTEM. This Preliminary Information communication provides information to the technician about the rear view camera options on the vehicles equipped with rear view camera. The rear view camera brightness can be adjusted on some models while the transmission is in reverse and using the Menu or Select button. To turn off or on the guidelines in the rear view camera, use the radio display Config icon then Display, then the guidelines option.
PI14182017-08-15. Service bulletin. BACK OVER PREVENTION. This preliminary informational bulletin provides repair information for a customer concern of a clunk noise when shifting into Drive or Reverse, or during heavy acceleration.
PIC5428G2016-09-23. Service bulletin. TRACTION CONTROL SYSTEM; SERVICE BRAKES, AIR:ANTILOCK:WHEEL SPEED SENSOR; SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP:WHEEL SPEED SENSOR/TONE RING; SERVICE BRAKES, ELECTRIC. THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN ON HOW TO DIAGNOSE AND REPAIR VEHICLES THAT MAY HAVE THE ANTILOCK BRAKING SYSTEM, SERVICE TRACTION CONTROL SYSTEM, AND/OR SERVICE STABILITRAK LIGHTS ARE ON. THE ELECTRONIC BRAKE CONTROL MODULE MAY HAVE ONE OR MORE OF THE FOLLOWING DIAGNOSTIC TROUBLE CODES C0035-C0050 WITH SPECIFICALLY SYMPTOM 18, 5A, OR 0F. TECHNICIAN WILL GAIN ACCESS TO THE CORRECT WHEEL BEAR PER THE DIAGNOSTIC TROUBLE CODE THAT IS SET. IF DEBRIS IS FOUND ON THE MAGNETIC ENCODER RING IT WILL NEEDED TO BE CLEANED.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.