WenmarOpen by Wenmar Pro

Service bulletins for the 2010 Chevrolet Tahoe

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

1601 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Equipment and accessories are shown. Show all

Bulletins, newest first
080089014G2022-06-13. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. This service bulletin provides information for dealers/technicians on Use of Dealer Case Management (DCM) and Being Prepared for Contacting U.S. Technical Assistance (TAC).
16-NA-1092022-06-09. Service bulletin. STEERING; EQUIPMENT. This service bulletin provides a procedure inspecting for excess grease or Sealant on the Exterior of the steering gear due to seeing grease or sealant on certain locations on the gear.
18-NA-0992022-06-01. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. This bulletin provides information for use on a Product Assistance Claim (PAC), which is formerly known as a Product Allegation Resolution (PAR) claim.
12-00-89-003B2022-05-10. Service bulletin. EQUIPMENT:ELECTRICAL; ENGINE. This service bulletin provides policy information on warranty administration guidelines for multiple repairs with independent causes (GM Canada Dealers Only).
01-00-89-010P2022-04-29. Service bulletin. EQUIPMENT. This informational bulletin provides information on a guide to help reduce repeat visits for the same customer concern.
030091001H2022-01-03. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY:VEHICLE CONTROLS:STEERING. This service bulletin provides a vibration analysis worksheet the technician can use in conjunction with the appropriate Vibration Analysis-Road testing procedure, when diagnosing vibration concerns.
PIT3099U2021-09-13. Service bulletin. EQUIPMENT. This Preliminary Information communication provides information to the technician about installing General Motors Accessory parts/kits. Technicians should refer to Service Information for information regarding most accessories. Technicians may also contact PARTECH and/or the Techline Customer Support Center for additional support.
PIP5632E2021-09-13. Service bulletin. EQUIPMENT:ELECTRICAL:ACCESSORY GENERATOR:CONTROLS. This Preliminary Information communication provides information to the technician that General Motors Technical Assistance Center may ask for Global Diagnostic System 2 Session Log. Technician will need use Global Diagnostic System 2 to send the session logs to General Motors Technical Assistance Center for further assistance on the vehicle in question.
15-NA-0822021-09-07. Service bulletin. STRUCTURE:FRAME AND MEMBERS; EQUIPMENT. Clunking Noise from Front of Vehicle During Turns and/or Bumps
15-NA-0792021-09-07. Service bulletin. EQUIPMENT:ELECTRICAL; COMMUNICATION:MANUFACTURER TELEMATICS. OnStar Voice Fallback Number Update
990420002L2021-08-09. Service bulletin. POWER TRAIN:MANUAL TRANSMISSION; POWER TRAIN:AUTOMATIC TRANSMISSION; EQUIPMENT. This service bulletin provides information on Driveline Clunk Noise and what is acceptable and what is considered normal operation.
080730035E2021-08-09. Service bulletin. EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY; POWER TRAIN. This bulletin provides information on the harmful effects of water or ethylene glycol in transmission fluid.
010842001N2021-08-09. Service bulletin. EXTERIOR LIGHTING; EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT. This service bulletin provides information for dealers/technicians on Exterior Lamp Condensation and Water Leaks and Replacement Guidelines.
100089006H2021-08-09. Service bulletin. EQUIPMENT. This service bulletin provides information for dealers on how to submit a product information report (PIR) (Canada Only).
070089037Q2021-08-09. Service bulletin. EQUIPMENT. This warranty administration bulletin provides policy information for GM courtesy transportation and roadside assistance programs.
070089037P2021-08-09. Service bulletin. EQUIPMENT. This warranty administration bulletin provides policy information for GM courtesy transportation and roadside assistance programs.
PIP5358A2021-06-14. Service bulletin. STRUCTURE; EQUIPMENT. This Preliminary Information communication provides information to the technician about vehicles that have an unusual noise and is difficult to identify, isolate or pinpoint. Technician should get record a sound clip or take a video of the noise for assessment by engineering. Technician will need to call General Motors Technical Assistance Center for further assistance.
020089002T2021-06-07. Service bulletin. EQUIPMENT. This service bulletin provides information for dealers/technicians on When and How to Submit a Field Product Report (FPR) (U.S. Dealers Only).
18NA1462021-05-24. Service bulletin. EQUIPMENT. This warranty administration bulletin provides policy information, proper labor operation selection and causal part identification for warranty transactions (U.S. Only).
1008110001I2021-05-03. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY. This informational bulletin provides information on proper use of floor mats.
18NA0992021-05-03. Service bulletin. EQUIPMENT. This bulletin provides information for use on a Product Assistance Claim (PAC), which is formerly known as a Product Allegation Resolution (PAR) claim.
PI0281D2021-04-26. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; STRUCTURE:FRAME AND MEMBERS:UNDERBODY SHIELDS. Underbody Component Corrosion The following information may be helpful when addressing underbody component corrosion with customers. Some customers may comment that one or more of their vehicle's underbody components are showing some form of corrosion. This corrosion may be red in appearance (rust) if the component is steel, forged iron or cast iron. This corrosion may also be grey or white in color if the component is constructed of an aluminum alloy.
PI0281D2021-04-26. Service bulletin. STRUCTURE:FRAME AND MEMBERS:UNDERBODY SHIELDS; EQUIPMENT ADAPTIVE/MOBILITY. Underbody Component Corrosion The following information may be helpful when addressing underbody component corrosion with customers. Some customers may comment that one or more of their vehicle's underbody components are showing some form of corrosion. This corrosion may be red in appearance (rust) if the component is steel, forged iron or cast iron. This corrosion may also be grey or white in color if the component is constructed of an aluminum alloy.
99-08-51-007F2021-04-26. Service bulletin. EQUIPMENT; WHEELS; EQUIPMENT ADAPTIVE/MOBILITY. Refinishing Aluminum Wheels This bulletin updates General Motor's position on refinishing aluminum wheels. GM does not endorse any repairs that involve welding, bending, straightening o re-machining. Only cosmetic refinishing of the wheel's coatings, using recommended procedures, is allowed. Evaluating Damage In evaluating damage, it is the GM Dealer's responsibility to inspect the wheel for corrosion, scrapes, gouges, etc. The Dealer must insure that such damage is not deeper than what can be sanded or polished off. The wheel must be inspected for cracks. If cracks are found, discard the wheel. Any wheels with bent rim flanges must not be repaired or refinished. Wheels that have been refinished by an outside company must be returned to the same vehicle. The Dealer must record the wheel ID stamp or the cast date on the wheel in order to assure this requirement. Refer to Refinisher's Responsibility — Outside Company later in this bulletin.
99-08-51-007F2021-04-26. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; WHEELS; EQUIPMENT. Refinishing Aluminum Wheels This bulletin updates General Motor's position on refinishing aluminum wheels. GM does not endorse any repairs that involve welding, bending, straightening o re-machining. Only cosmetic refinishing of the wheel's coatings, using recommended procedures, is allowed. Evaluating Damage In evaluating damage, it is the GM Dealer's responsibility to inspect the wheel for corrosion, scrapes, gouges, etc. The Dealer must insure that such damage is not deeper than what can be sanded or polished off. The wheel must be inspected for cracks. If cracks are found, discard the wheel. Any wheels with bent rim flanges must not be repaired or refinished. Wheels that have been refinished by an outside company must be returned to the same vehicle. The Dealer must record the wheel ID stamp or the cast date on the wheel in order to assure this requirement. Refer to Refinisher's Responsibility — Outside Company later in this bulletin.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.