WenmarOpen by Wenmar Pro

Service bulletins for the 2019 Chevrolet Suburban

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

978 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Body and frame are shown. Show all

Bulletins, newest first
N212338810 012022-04-01. Service bulletin. STRUCTURE. Service Update. On certain vehicles equipped with a 6.0L gasoline engine (RPO L96) and is a fleet government vehicle (RPO GAM), the left rear middle body mount may crack and collapse causing a metal-to-metal contact. Dealers are to inspect the integrity of 10 resistance spot welds attaching the body mount internal reinforcement to the vehicle floor forward of the left rear wheel. In addition, an external reinforcement will be MIG stitch welded to the outer (under-car) side of the vehicle at the body mount area.
PIP57992021-05-17. Service bulletin. STRUCTURE; POWER TRAIN. This Preliminary information communicates to the dealer technician to replace the transmission valve body on 2019-2021 10 speed transmissions to correct DTCs P2812 and P2814 setting if Service Information does not lead to root case of these DTCs.
19NA2552021-05-03. Service bulletin. STRUCTURE. This preliminary informational bulletin provides frame coating repair information to correct a customer concern of wax coating on frame peeling, metal shows corrosion/rusting (U.S. and Canada Only).
21NA0262021-03-08. Service bulletin. EQUIPMENT; STRUCTURE; EQUIPMENT ADAPTIVE/MOBILITY. This service bulletin provides information for dealers/technicians on accessory all-weather floor liners and flat mats warped or misshapen.
990851001E2020-12-21. Service bulletin. EQUIPMENT; STRUCTURE. Thins informational bulletin provides information on Paint-less Dent Repair Process.
18NA3062020-10-26. Service bulletin. EQUIPMENT; STRUCTURE:BODY. This Warranty Administration bulletin provides information for dealers/Service advisors on when and how to submit a Pre-Repair Authorization (PRA) (US dealers only).
150089002B2020-09-08. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; STRUCTURE. This bulletin provides information to dealers regarding transportation damage repair claim submission requirements.
19NA2552020-08-31. Service bulletin. STRUCTURE; EQUIPMENT. This preliminary informational bulletin provides frame coating repair information to correct a customer concern of wax coating on frame peeling, metal shows corrosion/rusting (U.S. and Canada Only).
PIT5533C2020-08-10. Service bulletin. STRUCTURE; SUSPENSION. This Preliminary Information communication provides information to the technician about vehicles that have a creak, click, pop, and or crack type noise from the front suspension or front frame area while making tight turns. Technician will need to loosen and then re-torque the four front frame cross member nuts and bolts.
PI0281H2020-06-01. Service bulletin. STRUCTURE:BODY; EQUIPMENT ADAPTIVE/MOBILITY. This preliminary informational bulletin provides information to dealership personnel which may be helpful when addressing underbody component corrosion with customers.
PIT5259F2020-05-11. Service bulletin. STRUCTURE. This Preliminary Information communication advises the technician that the door striker cover will be shipped with the vehicle from the assembly plant. Technician is to make sure the rounded side of the cover is positioned towards the outboard side of the vehicle.
19NA0042020-04-27. Service bulletin. STRUCTURE:FRAME AND MEMBERS; WHEELS; EQUIPMENT ADAPTIVE/MOBILITY. This technical bulletin provides repair information to correct a customer concern of hearing a squeak or creak from the right rear of vehicle while driving.
PIT5426C2020-04-13. Service bulletin. STRUCTURE. This Preliminary Information communication provides information to the technician for a water leak in in the second and third row seating area. Inspect the C-pillar which is the body vertical structure behind the rear passenger door area of the affected side of the vehicle for water intrusion or water marks on the seat belt retractor. If water evidence is found on the seat belt webbing or the retractor the seat belt/ retractor must be replaced after the water leak has been corrected and verified. There are 3 areas of seam sealer that will need to be addressed. After gaining access to the C-pillar and rear quarter panel area inspect for voids or missing seam sealer and apply a clear flow able seam sealer where needed.
19NA1042020-04-06. Service bulletin. EQUIPMENT; STRUCTURE:BODY; EQUIPMENT ADAPTIVE/MOBILITY. This informational bulletin provides information for dealers/technicians and customers on steam/vapor coming from the front grille or radiator area.
18NA2392020-04-06. Service bulletin. STRUCTURE. This technical bulletin provides a procedure to add washers on the lower column mounting bracket locations due to the shaft laying on the metal support at the bottom of the column.
18NA2792020-03-02. Service bulletin. STRUCTURE:BODY:DOOR; LATCHES/LOCKS/LINKAGES:DOORS:LATCH. This informational bulletin provides information for dealers/technicians on the process to disable and enable passive unlocking.
19NA2552019-12-16. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; STRUCTURE. This preliminary informational bulletin provides frame coating repair information to correct a customer concern of wax coating on frame peeling, metal shows corrosion/rusting (U.S. and Canada Only).
PIT5278E2019-10-15. Service bulletin. STRUCTURE:BODY:HATCHBACK/LIFTGATE. This Preliminary Information communication provides information to the technician about vehicles with erratic or hesitation when opening and closing the power liftgate. There may be a diagnostic trouble code B153A set in the power liftgate module. This concern could occur if the left liftgate actuator is internally coming apart. The actuator will need to be replaced however care must be taken when removing the actuator from the vehicle. If the internal portion of the actuator had completely separated the end of the actuator could become a projectile when removed. Obtain a number 8 self-tapping screw that measures 1 ½ inches long. Fully open the liftgate and install the screw anywhere in a 30 millimeter space from the bottom of the smooth tube to secure the tubes. Continue with the liftgate actuator by following the liftgate power assist actuator procedure in service information.
PIT5576C2019-10-15. Service bulletin. STRUCTURE. This Preliminary information communicates and issue with the hood ajar message being displayed when the hood is not ajar. Inspect the body ground strap to insure it is connected in the proper locations and the strap eyelets are tight and do not rotate.
19NA1392019-07-29. Service bulletin. STRUCTURE:FRAME AND MEMBERS. This technical bulletin provides a procedure to pry the upper and lower quarter rear trim panel sheet metal apart to eliminate a creak noise heard from the quarter lower rear trim panel area.
18NA2792019-07-01. Service bulletin. STRUCTURE:BODY:DOOR; LATCHES/LOCKS/LINKAGES; STRUCTURE. This informational bulletin provides information for dealers/technicians on the process to disable and enable passive unlocking.
PIT56832019-06-10. Service bulletin. STRUCTURE:BODY:HATCHBACK/LIFTGATE. This Preliminary information communicates that unwanted liftgate opening can occur if the customer leaves a programmed fob in the vicinity of the passive liftgate antenna. If the antenna can locate a programmed fob in said area, the gate will open if the liftgate open switch or hands free sensor is activated.
PIT5291E2019-06-10. Service bulletin. STRUCTURE. This Preliminary Information communication provides information to the technician about vehicle that may have wind whistle noise heard from the right or left rear quarter glass area when driving at highway speeds or with a cross wind. Technician will inspect the quarter glass for excessive urethane. If excessive urethane is found use a sharp knife and cut off the excessive urethane. Also the technician will install foam tape along the entire length of the tail light assembly.
PIT5308D2019-06-03. Service bulletin. STRUCTURE:BODY:HATCHBACK/LIFTGATE; ELECTRICAL SYSTEM. This Preliminary Information communication provides information to the technician on the steps to diagnose and repair vehicles that have remote start is inoperative, power lift gate Regular Production Option Code (TB5) is inoperative with the ignition off, Crank no start, Start and Stall, and vehicles equipped with the diesel engine, the blower motor may stay on after the engine is turned off. Technician may find Diagnostic Trouble Code P2537 and/or P129D set. Technician will need to Use a voltmeter and check circuit 5985 at the Engine Control Module and Transmission Control Module. If no or low voltage is found, use the wiring diagram in Service Information and perform normal circuit diagnosis.
17NA1532019-05-20. Service bulletin. EQUIPMENT; STRUCTURE:BODY:HATCHBACK/LIFTGATE; STRUCTURE. This informational bulletin provides information and operating tips for the hands free lift gate.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.