Service bulletin 18NA279
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10161880 |
| Published by NHTSA | 2019-07-01 |
| Manufacturer's number | 18NA279 |
| Manufacturer's date | 2019-05-29 |
| NHTSA component | STRUCTURE:BODY:DOOR; LATCHES/LOCKS/LINKAGES; STRUCTURE |
NHTSA's summary
This informational bulletin provides information for dealers/technicians on the process to disable and enable passive unlocking.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Body and frame, Latches and locks
| CADILLAC CT6 | 2019 |
|---|---|
| CADILLAC ESCALADE | 2019 |
| CADILLAC ESCALADE ESV | 2019 |
| CADILLAC XT4 | 2019 |
| CADILLAC XT6 | 2020 |
| CHEVROLET BLAZER | 2019 |
| CHEVROLET BOLT EV | 2019 |
| CHEVROLET CAMARO | 2019 |
| CHEVROLET CRUZE | 2019 |
| CHEVROLET MALIBU | 2019 |
| CHEVROLET SILVERADO 1500 | 2019 (the catalog's model; the bulletin names a series or trim of it) |
| CHEVROLET SPARK | 2019 |
| CHEVROLET SUBURBAN | 2019 |
| CHEVROLET TAHOE | 2019 |
| CHEVROLET TRAX | 2019 |
| CHEVROLET VOLT | 2019 |
| GMC ACADIA | 2019 |
| GMC SIERRA 1500 | 2019 (the catalog's model; the bulletin names a series or trim of it) |
| GMC YUKON | 2019 |
| GMC YUKON XL | 2019 |
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 23V845000 | 2023-12-14. SEAT BELTS:PRETENSIONER; STRUCTURE:BODY:ROOF AND PILLARS |
|---|---|
| 22V930000 | 2022-12-15. SEAT BELTS:PRETENSIONER; STRUCTURE:BODY:ROOF AND PILLARS |
| 2020130 | 2020-03-26. Structure |
| 20V184000 | 2020-03-26. LATCHES/LOCKS/LINKAGES:DOORS:LATCH |
A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.
| 25-NA-114 | 2025-09-06. Service bulletin. This informational bulletin provides information on Anti-Chip Coating Appearance. |
|---|---|
| 18-NA-069 | 2025-05-06. Service bulletin. This service bulletin provides a service procedure to correct conditions of Poor Engine Performance in Extremely cold weather conditions, CAC Icing, MIL Illuminated with DTCs set. |
| 24-NA-003 | 2025-04-15. Service bulletin. This technical bulletin provides a procedure to correct the condition of Sunroof Wind / Air Deflector Inoperative. |
| 19-NA-255 | 2025-04-10. Service bulletin. This service bulletin provides frame coating repair information to correct a customer concern of wax coating on frame peeling, metal shows corrosion/rusting (U.S. and Canada Only). |
| 24-NA-046 | 2025-03-13. Service bulletin. This technical bulletin provides a procedure to correct the condition of Suction Cup Marks on Window Glass. |
| 05-08-51-001L | 2025-03-08. Service bulletin. This informational bulletin provides a procedure on how to remove the paint stain that may present itself under the shipping film. |
| 22-NA-068 | 2025-02-28. Service bulletin. This technical bulletin provides repair information to correct a customer concern of Diagnostic Tips For Park Assist Off Message / Unwanted Or False Park Assist Alerts / No DTCs. |
| 22-NA-244 | 2025-02-12. Service bulletin. This warranty administration service bulletin provides information about GM Accessories - Dealer-Installed, Repaired or Replaced During Warranty Coverage Period. |
| 10-08-110-001L | 2025-02-11. Service bulletin. This service bulletin provides information on proper use of floor mats. |
| PIC6163D | 2025-02-10. Service bulletin. This Preliminary Information communication provides information to the technician about vehicles that have several fasteners, located on either side of the hood latch, appear to be loose. Do not tighten, or otherwise move these two fasteners. These fasteners are part of the front fascia support bracket. They have a preset gap by design, and they have Loctite applied to the threads of the fastener so that this preset gap does not change. |