WenmarOpen by Wenmar Pro

Service bulletins for the 2018 Chevrolet Silverado

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

1747 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Driver assistance are shown. Show all

Bulletins, newest first
174352021-04-30. Service bulletin. EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY; BACK OVER PREVENTION: SENSING SYSTEM: CAMERA. and/or repairs. Condition Certain 2018 model year Chevrolet Silverado HD and GMC Sierra HD vehicles, equipped with BYOM2 Radio with camera ON option (RPO 5F9, IOB), may have been built with the rearview camera OFF due to an incorrect calibration received during production. When the vehicle is shifted into Reverse, there is no rear image displayed. Correction Dealers will reprogram the radio.
PIT5544D2021-04-19. Service bulletin. STEERING; BACK OVER PREVENTION; POWER TRAIN. This Preliminary information communicates information on a hydrauilc rush type noise from the power steering gear. This noise is a characteristic of the new Active Hydraulic Assist System RPO NV8 and no repairs should be made. The noise is most noticeable in the cab at idle, in park, with all accessories turned off.
17-NA-3312021-04-15. Service bulletin. BACK OVER PREVENTION: SENSING SYSTEM: CAMERA; EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY. Rear View Camera Guidelines Not Present at Times Condition Some customers may report that the Rear View Camera (RVC) guidelines are temporarily not available at times but the RVC will remain on during the concern. Additionally, no related DTCs will be found if this bulletin applies. One example of when this concern may be observed is if a customer quickly starts the car and immediately places the shifter in Reverse while the infotainment system is still in the initial boot up process. Cause This is a result of the RVC image being provided via an alternate robust RVC feed from the Video Bypass Module (NGI systems) or from the radio (BYOM2 and Info 3.0 systems). This alternate robust RVC feed is provided in the event that the primary RVC feed is not available for any reason just to ensure that the RVC image is always present when in reverse. Correction If this concern is experienced and no related codes are present, DO NOT replace any parts as it is normal for the RVC guidelines not to be present when the RVC image being displayed is from the alternate robust RVC feed. If this occurs after quickly starting the vehicle and immediately placing the shifter in Drive, the RVC guidelines can be displayed again in most cases if they are really needed by safely coming to a stop, placing the transmission in Park for a moment, and then shifting to Reverse again.
PIT5386F2021-02-16. Service bulletin. ELECTRICAL SYSTEM; BACK OVER PREVENTION. This Preliminary Information communication provides information to the technician about vehicles that are found to have a back-up alarm inoperative during the Pre-Delivery Inspection. On trucks equipped with the Back Up Alarm (RPO 8S3), the alarm will be intentionally left disconnected from the assembly plant. Technician will reroute the harness and plug it in.
PIT5387J2021-02-16. Service bulletin. ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; BACK OVER PREVENTION:SOFTWARE; BACK OVER PREVENTION:DISPLAY FUNCTION. This Preliminary Information communication provides information to the technician how to repair vehicles that Instrument Panel Cluster, Radio, and Heater-Vent-Air Conditioning display blanks out, Bluetooth phone or Pandora connection dropped, the radio station or volume changes when operating the snow plow. Please advise the customer that engineering is aware of this concern and working on this issue.
PIT5386F2021-01-25. Service bulletin. ELECTRICAL SYSTEM; BACK OVER PREVENTION. This Preliminary Information communication provides information to the technician about vehicles that are found to have a back-up alarm inoperative during the Pre-Delivery Inspection. On trucks equipped with the Back Up Alarm (RPO 8S3), the alarm will be intentionally left disconnected from the assembly plant. Technician will reroute the harness and plug it in.
PIT5551F2020-11-16. Service bulletin. FORWARD COLLISION AVOIDANCE. This Preliminary information communicates a "Forward Collision System Reduced" message displayed on the DIC when the Forward Automatic Braking has been set to the "Alert" setting. This is normal when the FAB has been set to "Alert".
PIT4322K2020-05-11. Service bulletin. ELECTRONIC STABILITY CONTROL:AUTOMATIC (ASC). This Preliminary Information communication provides information to the technician about vehicles that have an unwanted Stability Activation and/or a Service Stability message on the Driver Information Center. Technician may find a Diagnostic Trouble Code C0710. Technician should inspect for vehicles modifications before any in-depth diagnostics are performed.
150601002I2020-04-27. Service bulletin. BACK OVER PREVENTION; ENGINE. This technical bulletin provides a procedure to repair the valve lifter oil manifold and/or lifters to correct the customers concern of engine misfire, ticking noise and/or MIL Illuminated.
PIT5552D2020-04-13. Service bulletin. BACK OVER PREVENTION. This Preliminary information communicates repair information for the rear vision camera or surround vision camera image being: - Yellow - Blurry - Distorted - Image scrolling - Image with NO gridlines - Screen is blue with gridlines - Screen is blue with Service Rear Vision System message
PIT5527C2019-12-09. Service bulletin. LANE DEPARTURE. This Preliminary Information communication provides information to the technician about vehicles that show a "Take Steering" message on the Driver Information Center along with a warning chime/alert. Dealer should be advised the purpose of the message is to alert the driver that the Lane Keep Assist system has not detected active steering input from the driver (hands off the steering wheel).
PIT5535E2019-11-12. Service bulletin. LANE DEPARTURE. This Preliminary Information communication provides information to the technician about vehicles that may have Service Front Camera, Service Lane Departure Warning, and Service Lane Keep Assist Message. Technician may find Diagnostic Trouble Code B1008 Sym 4B set. Technician will need to check the windshield to ensure it is not aftermarket. Technician will also check for anything that may impair the front view camera and ensure the camera is properly mounted.
PIT5551E2019-11-12. Service bulletin. FORWARD COLLISION AVOIDANCE. This Preliminary information communicates a "Forward Collision System Reduced" message displayed on the DIC when the Forward Automatic Braking has been set to the "Alert" setting. This is normal when the FAB has been set to "Alert".
PIT5551E2019-10-15. Service bulletin. FORWARD COLLISION AVOIDANCE. This Preliminary information communicates a "Forward Collision System Reduced" message displayed on the DIC when the Forward Automatic Braking has been set to the "Alert" setting. This is normal when the FAB has been set to "Alert".
N1922099202019-08-26. Service bulletin. FORWARD COLLISION AVOIDANCE; EQUIPMENT. Certain vehicles, may have incorrect language in the Forward Auto Braking (FAB) section of the owner manual which states, ?If the vehicle has Forward Collision Alert (FCA), it also has FAB which includes Intelligent Brake Assist (IBA)?. This statement is correct for light duty trucks but the heavy duty models only have the Forward Collision Alert. Customer to receive an owner manual insert. Dealers are to print and install the owner manual insert on unsold vehicles.
PIT5535D2019-08-12. Service bulletin. LANE DEPARTURE. This Preliminary Information communication provides information to the technician about vehicles that may have Service Front Camera, Service Lane Departure Warning, and Service Lane Keep Assist Message. Technician may find Diagnostic Trouble Code B1008 Sym 4B set. Technician will need to check the windshield to ensure it is not aftermarket. Technician will also check for anything that may impair the front view camera and ensure the camera is properly mounted.
PIT5551D2019-06-10. Service bulletin. FORWARD COLLISION AVOIDANCE. This Preliminary information communicates a "Forward Collision System Reduced" message displayed on the DIC when the Forward Automatic Braking has been set to the "Alert" setting. This is normal when the FAB has been set to "Alert".
17NA2692019-05-13. Service bulletin. BACK OVER PREVENTION; BACK OVER PREVENTION: SENSING SYSTEM: CAMERA. This Technical bulletin provides information on new software to correct the rear camera display being too bright.
PIT4322H2019-04-08. Service bulletin. ELECTRONIC STABILITY CONTROL:AUTOMATIC (ASC). This Preliminary Information communication provides information to the technician about vehicles that have an unwanted Stability Activation and/or a Service Stability message on the Driver Information Center. Technician may find a Diagnostic Trouble Code C0710. Technician should inspect for vehicles modifications before any in-depth diagnostics are performed.
PIT5386E2019-04-08. Service bulletin. BACK OVER PREVENTION; ELECTRICAL SYSTEM. This Preliminary Information communication provides information to the technician about vehicles that are found to have a back-up alarm inoperative during the Pre-Delivery Inspection. On trucks equipped with the Back Up Alarm (RPO 8S3), the alarm will be intentionally left disconnected from the assembly plant. Technician will reroute the harness and plug it in.
18NA3602019-03-25. Service bulletin. LANE DEPARTURE: SENSING SYSTEM: CAMERA; VISIBILITY. This technical bulletin provides a procedure to replace the side mirror cameras if found the cause of the reduced key fob range.
PIT5552C2019-03-11. Service bulletin. BACK OVER PREVENTION: SENSING SYSTEM: CAMERA. This Preliminary information communicates repair information for the rear vision camera or surround vision camera image being: - Yellow - Blurry - Distorted - Image scrolling - Image with NO gridlines - Screen is blue with gridlines - Screen is blue with Service Rear Vision System message
PIT4322J2018-10-15. Service bulletin. ELECTRONIC STABILITY CONTROL (ESC). This Preliminary Information communication provides information to the technician about vehicles that have an unwanted Stability Activation and/or a Service Stability message on the Driver Information Center. Technician may find a Diagnostic Trouble Code C0710. Technician should inspect for vehicles modifications before any in-depth diagnostics are performed.
PIT5481D2018-09-17. Service bulletin. LANE DEPARTURE. This Preliminary Information communication provides information to the technician with additional information on the functionality of Lane Keep Assist.Starting with2016 model year Lane Keep Assist Regular Production Option Code (UHX) replaced Lane Departure Warning Regular Production Option Code (UFL). Lane Keep Assist is designed to assist the driver in keeping the vehicle from drifting out of a driving lane that has clearly identified markings. The electric power steering provides a gentle steering correction if a lane marking has been crossed and the driver has not actively responded.
PIT5535C2018-08-20. Service bulletin. LANE DEPARTURE: LANE KEEP: STEERING ASSIST; LANE DEPARTURE: WARNING; LANE DEPARTURE: SENSING SYSTEM: CAMERA. This Preliminary Information communication provides information to the technician about vehicles thatmay have Service Front Camera, Service Lane Departure Warning, and Service Lane Keep Assist Message. Technician may find Diagnostic Trouble Code B1008 Sym 4B set. Technician will need to check the windshield to ensure it is not aftermarket. Technician will also check for anything that may impair the front view camera and ensure the camera is properly mounted.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.