WenmarOpen by Wenmar Pro

Service bulletins for the 2017 Chevrolet Cruze

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

1233 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Transmission and driveline are shown. Show all

Bulletins, newest first
PIP5558B2018-08-06. Service bulletin. POWER TRAIN:CLUTCH ASSEMBLY:PEDAL/HAND LEVER(MOTORCYCLE). This Preliminary information communicates a possible cause of the clutch pedal slow to return.
173372018-06-04. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ENGINE AND ENGINE COOLING:EXHAUST SYSTEM; ENGINE. 17337 - Product Emission Recall. General Motors has decided to conduct a Voluntary Emission Recall involving certain 2016 model year Chevrolet Colorado, GMC Canyon; 2017 model year Chevrolet Express, GMC Savana; 2017-2018 model year Chevrolet Colorado, Cruze, Silverado HD, GMC Canyon, Sierra HD and 2018 model year Chevrolet Equinox, GMC Terrain vehicles, equipped with a diesel engine. The engine control module in these vehicles may not properly diagnose a fault in the exhaust particulate matter sensor. Additionally, a subset of these vehicles, certain 2017 model year Chevrolet Silverado HD and GM Sierra HD vehicles, may in rare instances exhibit a condition in which the engine surges up to 2,800 RPM during vehicle coast or vehicle braking. Program the engine control module and transmission control module when applicable.
060089026N2018-06-04. Service bulletin. ELECTRICAL SYSTEM; VISIBILITY:SUN/MOON ROOF ASSEMBLY; STRUCTURE:BODY:DOOR; POWER TRAIN:TRANSFER CASE (4-WHEEL DRIVE); VISIBILITY:WINDSHIELD; ELECTRONIC STABILITY CONTROL (ESC). This warranty bulletin provides labor operation numbers for customer concerns that cant be duplicated.
080730026E2018-06-04. Service bulletin. POWER TRAIN. This informational bulletin provides information on Some vehicles may rock or move slightly forward or rearward while in Park at start up after cold soak. This condition may be accompanied by a clunk noise. This is a slight movement that is more often seen visually, rather than felt, when viewed from the outside and using the auto-start feature, if equipped.
040730013D2018-06-04. Service bulletin. POWER TRAIN; ENGINE; EQUIPMENT. This informational bulletin provides information to dealership personnel on automatic transmission shift and engine drivability concerns and/or MIL ON due to aftermarket oil bath air filter use.
17-NA-0662018-05-21. Service bulletin. POWER TRAIN. This warranty administration bulletin provide policy information for automatic transmission Oil Cooler Flush and flow test.
16-NA-3162018-05-21. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT; POWER TRAIN:AXLE ASSEMBLY:AXLE SHAFT. This technical bulletin provides a procedure to drill two holes in the rear axle housings to spray lubricant into and then close up with rivets to correct a condition of a rear axle creak noise due to the improper lubrication of some of the internals.
17-NA-0662018-05-21. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION. This warranty administration bulletin provide policy information for automatic transmission Oil Cooler Flush and flow test.
100729001C2018-05-21. Service bulletin. POWER TRAIN. This informational bulletin provides information for the 6-Speed manual transaxle (RPOs MF3, MR5, MR6, MZ0, MZ4, MZU) current service strategy for transmissions requiring internal repairs (ie: synchronizer, gear or bearing replacement) is to replace the unit as an assembly.
080730035C2018-05-21. Service bulletin. POWER TRAIN. This bulletin provides information on the harmful effects of water or ethylene glycol in transmission fluid.
060089031E2018-05-21. Service bulletin. ENGINE; POWER TRAIN:AUTOMATIC TRANSMISSION. This informational bulletin provides information on OEM and Remanufactured Engine and Automatic Transmission/Transaxle Identification.
16NA3382018-05-21. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION; ENGINE. This Bulletin provides guidelines for Dealers required to contact the PQC for engine or transmission assembly replacement and explains the PQC process, GWM Transaction submission, vehicle service record retention and proper handling of assembly returns.
PIP5558A2018-05-21. Service bulletin. POWER TRAIN:CLUTCH ASSEMBLY:PEDAL/HAND LEVER(MOTORCYCLE). This Preliminary information communicates a possible cause of the clutch pedal slow to return. Gives a technician direction to assist in diagnosis.
16NA3382018-05-07. Service bulletin. POWER TRAIN. This Bulletin provides guidelines for Dealers to determine whether or not they need to contact the PQC for an engine, transmission or transfer case assembly replacement and information explaining the PQC process, Global Warranty Management Transaction submission, vehicle repair record retention and proper handling of assembly returns.
16NA3162018-05-07. Service bulletin. POWER TRAIN:AXLE ASSEMBLY:BANJO HOUSING; BACK OVER PREVENTION. This technical bulletin provides a procedure to drill two holes in the rear axle housings to spray lubricant into and then close up with rivets to correct a condition of a rear axle creak noise due to the improper lubrication of some of the internals.
GCUS-3-7762017-12-22. Service bulletin. POWER TRAIN. 16156 Customer Satisfaction Program. Certain vehicles, equipped with a 6?Speed automatic transmission (RPO MNU), may have a condition in which one of the transmission mount strut bracket fasteners may not have been tightened to the proper torque value. If the fastener loosens or completely separates there will be a noticeable degradation in Noise/Vibration/Harshness (NVH) performance in the form of hard shifts and clunking noises under torque inputs.
PIE0372C2017-10-15. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:GEAR POSITION INDICATION (PRNDL). This engineering informational bulletin is requesting information from the field on vehicles that have the condition of vehicle difficult to shift or will not shift into gear.
16-NA-3162017-10-15. Service bulletin. POWER TRAIN:AXLE ASSEMBLY. This technical bulletin provides a procedure to drill two holes in the rear axle housings to spray lubricant into and then close up with rivets to correct a condition of a rear axle creak noise due to the improper lubrication of some of the internals.
16-NA-3382017-08-31. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION. This Bulletin provides guidelines for Dealers required to contact the PQC for engine or transmission assembly replacement and explains the PQC process, GWM Transaction submission, vehicle service record retention and proper handling of assembly returns.
PIE0372D2017-08-31. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:GEAR POSITION INDICATION (PRNDL). This engineering informational bulletin is ending the need for information from the field on vehicles that have the condition of vehicle difficult to shift or will not shift into gear.
PIC6223A2017-08-15. Service bulletin. POWER TRAIN:AXLE ASSEMBLY. This Preliminary Information communication advises the technician that the Rear Axle is no longer on restriction.
PIE0372B2016-10-19. Service bulletin. POWER TRAIN. THIS ENGINEERING INFORMATIONAL BULLETIN IS REQUESTING INFORMATION FROM THE FIELD ON VEHICLES THAT EXHIBIT THE CONDITION OF HARD TO SHIFT OR GET INTO GEAR.
16NA0192016-10-07. Service bulletin. POWER TRAIN. THIS TECHNICAL BULLETIN PROVIDES THE PROCEDURES TO COMPLETE A TRANSSMISSION ADAPTIVE LEARN ON ALL THE DIFFERENT TYPES OF VEHICLES AND TRANSMISSIONS BASED ON RPO OPTIONS TO CORRECT A CONDITION OF HARSH SHIFTS ON HARD ACCELLERATIONS.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.