WenmarOpen by Wenmar Pro

Service bulletins for the 2017 Chevrolet Cruze

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

1233 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Driver assistance are shown. Show all

Bulletins, newest first
PIP56232023-03-13. Service bulletin. BACK OVER PREVENTION; ENGINE AND ENGINE COOLING. This Preliminary information communicates that a rotational clicking noise heard after engine shut down is a design characteristic and no repairs should be attempted.
070601016G2022-06-13. Service bulletin. BACK OVER PREVENTION. This informational bulletin provides information on Internal Engine Noise or Damage After Oil Filter Replacement.
PIT5698B2021-09-13. Service bulletin. ELECTRICAL SYSTEM:ADAS:BLINDSPOT:SENSORS. This Preliminary information communicates additional information on how a LIN bus operates and diagnostic tips when working on a LIN bus.
18NA3252020-11-30. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM:ADAS:VIDEO MONITOR/SCREEN. This technical bulletin provides repair information to correct a customer concern of infotainment screen appearing too bright at night.
060089026N2018-06-04. Service bulletin. ELECTRICAL SYSTEM; VISIBILITY:SUN/MOON ROOF ASSEMBLY; STRUCTURE:BODY:DOOR; POWER TRAIN:TRANSFER CASE (4-WHEEL DRIVE); VISIBILITY:WINDSHIELD; ELECTRONIC STABILITY CONTROL (ESC). This warranty bulletin provides labor operation numbers for customer concerns that cant be duplicated.
17NA1392018-06-04. Service bulletin. BACK OVER PREVENTION: SENSING SYSTEM: CAMERA; ELECTRICAL SYSTEM:SOFTWARE; BACK OVER PREVENTION. This technical bulletin provides a procedure to reprogram the HMI module to correct a condition of Rear View Camera Guidelines Shifted Off Center due to a software abnormality.
17NA3752018-06-04. Service bulletin. BACK OVER PREVENTION: SENSING SYSTEM: CAMERA. This informational bulletin provides a diagnostic tip for rear vision camera image that is grainy, distorted and/or pixelated
16NA3162018-05-07. Service bulletin. POWER TRAIN:AXLE ASSEMBLY:BANJO HOUSING; BACK OVER PREVENTION. This technical bulletin provides a procedure to drill two holes in the rear axle housings to spray lubricant into and then close up with rivets to correct a condition of a rear axle creak noise due to the improper lubrication of some of the internals.
080730026D2018-05-07. Service bulletin. ELECTRONIC STABILITY CONTROL (ESC). This informational bulletin provides information on Some vehicles may rock or move slightly forward or rearward while in Park at start up after cold soak. This condition may be accompanied by a clunk noise. This is a slight movement that is more often seen visually, rather than felt, when viewed from the outside and using the auto-start feature, if equipped.
17NA3312018-04-23. Service bulletin. BACK OVER PREVENTION: SENSING SYSTEM: CAMERA. This informational bulletin provides information to the customer about the rear camera guidelines not being present at times due to the VBM taking over the rear camera option.
PIC5611E2017-08-15. Service bulletin. EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.; BACK OVER PREVENTION: CAMERA SYSTEM. This Preliminary Information communication provides information to the technician about the rear view camera options on the vehicles equipped with rear view camera. The rear view camera brightness can be adjusted on some models while the transmission is in reverse and using the Menu or Select button. To turn off or on the guidelines in the rear view camera, use the radio display Config icon then Display, then the guidelines option.
17-NA-1322017-08-15. Service bulletin. BACK OVER PREVENTION: CAMERA SYSTEM. This technical bulletin provides a procedure to test and repair the cam sensor and stop replacing the ECM if the code P0606 sets.
PIC6220A2017-08-15. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; BACK OVER PREVENTION: CAMERA SYSTEM. This Preliminary Information communication provides information to the technician about vehicles with an intermittent loss of gridlines in the rear camera display screen and a "Service Rear Vision System" message that both happen at the same time. Technician should check for Diagnostic Trouble Codes and follow published Service Information diagnostics for the Diagnostic Trouble Codes. If not Diagnostic Trouble Codes stored and the concern was duplicated or the customer described the concern, dealer should communicate to the customer that we apologize for this inconvenience and that General Motors is currently evaluating this concern.
PIC62202017-05-15. Service bulletin. BACK OVER PREVENTION: CAMERA SYSTEM. THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN ABOUT VEHICLES WITH AN INTERMITTENT LOSS OF GRIDLINES IN THE REAR CAMERA DISPLAY SCREEN AND A "SERVICE REAR VISION SYSTEM" MESSAGE THAT BOTH HAPPEN AT THE SAME TIME. TECHNICIAN SHOULD CHECK FOR DIAGNOSTIC TROUBLE CODES AND FOLLOW PUBLISHED SERVICE INFORMATION DIAGNOSTICS FOR THE DIAGNOSTIC TROUBLE CODES. IF NOT DIAGNOSTIC TROUBLE CODES STORED AND THE CONCERN WAS DUPLICATED OR THE CUSTOMER DESCRIBED THE CONCERN, DEALER SHOULD COMMUNICATE TO THE CUSTOMER THAT WE APOLOGIZE FOR THIS INCONVENIENCE AND THAT GENERAL MOTORS IS CURRENTLY EVALUATING THIS CONCERN.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.