Service bulletins for the 2017 Chevrolet Camaro
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
1578 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
By topic
| 17-NA-066 | 2018-05-21. Service bulletin. POWER TRAIN. This warranty administration bulletin provide policy information for automatic transmission Oil Cooler Flush and flow test. |
|---|---|
| 17-NA-039 | 2018-05-21. Service bulletin. ENGINE AND ENGINE COOLING. This informational bulletin provides additional information on what oil to use in the 2.0L engines to eliminate the risk of engine/piston failure. |
| 17-NA-025 | 2018-05-21. Service bulletin. EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.. This technical bulletin is providing a procedure to reprogram the HMI module to correct multiple conditions including Waiting for Update Media Message, Voice Command For Calling Bluetooth Phone Contacts Inoperative, Intermittent Loss of Rear Camera Gridlines, Service Rear Vision System Message, Radio Turns On Unwanted At Startup, and/or Navigation Radio Destination State Defaults To WV, Intermittent Radio/display Resets, Volume Control Inoperative. |
| 17-NA-019 | 2018-05-21. Service bulletin. EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.. This technical bulletin provides a procedure to reprogram the radio to correct a condition of Apple Carplay Will Not Launch After 1124 Key Cycles and Displays Message Advising to Connect a Supported Device via USB Even Though One is Already Connected due to an internal calibration concern. |
| 17-NA-004 | 2018-05-21. Service bulletin. STRUCTURE:BODY:DOOR. This technical bulletin provides repair information to correct a customer concern of high outside door handle opening efforts. |
| 16-NA-129 | 2018-05-21. Service bulletin. POWER TRAIN. This informational bulletin advises the technician not to change the crankshaft balancer if it has the illusion of a wobble or vibration appearance. |
| 16-NA-109 | 2018-05-21. Service bulletin. STEERING. This technical bulletin provides a procedure inspecting for excess grease or Sealant on the Exterior of the steering gear due to seeing grease or sealant on certain locations on the gear. |
| 06-08-47-001M | 2018-05-21. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. This information bulletin explains the labor operation numbers used for submitting warranty claims and how to setup, and reprogram modules. |
| PIE0385A | 2018-05-21. Service bulletin. ENGINE AND ENGINE COOLING. This engineering information bulletin is requesting information from the field on vehicles that have the concern of a noisy water pump. |
| PI1498C | 2018-05-21. Service bulletin. WHEELS. This preliminary bulletin provides a procedure to clean the back side of the rims and rotors and to correct the customers concern of wheel clicking. |
| 16-NA-369 | 2018-05-21. Service bulletin. EQUIPMENT. This informational bulletin provides information on what parts need to be installed during PDI and what parts are to be installed by the customer. |
| PIC6296A | 2018-05-21. Service bulletin. EQUIPMENT:ELECTRICAL; EQUIPMENT. This Preliminary Information communication provides information to the technician that when scanning a vehicle for Diagnostic Trouble Codes, may find a temporary loss of Human Machine Interface communication with Global Diagnostic System 2. Technician should not replace the Human Machine Interface for this concern, power cycling of the Human Machine Interface fuse should restore communication. Technician should be advised that the Human Machine Interface and Global Diagnostic System 2 interaction concern has been reported to engineering for root cause and correction. |
| PIP5375E | 2018-05-21. Service bulletin. POWER TRAIN:MANUAL TRANSMISSION. This Preliminary Information communication advises the technician that the rear wheel drive manual transmission restriction has ended. |
| PIT5411H | 2018-05-21. Service bulletin. EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.. This Preliminary Information communication advises the technician that the Human Machine Interface, Radio or Tuner, radio controls, Integrated Center Stack, display, and Media Disc Players are placed on restriction through the General Motors Technical Assistance Center. Dealer will need to contact General Motors Technical Assistance Center for further assistance. |
| PIP5163C | 2018-05-21. Service bulletin. ENGINE. This Preliminary Information communication provides information to the technician about engine block of possible cylinder bore damage, scoring or out of round as the possible cause of engine oil consumption, misfire, cylinder leakage or blow by. Technician will need to inspect the engine for Cylinder damage or scoring, An out of round cylinder bore, Dirt intrusion, and Catalytic Converter failure. |
| PIC6300 | 2018-05-21. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT. This Preliminary Information document communicates direction to the dealership technicians to aid them indiagnosingnoise concerns specific to the convertible. |
| PIT5119E (1) | 2018-05-21. Service bulletin. ELECTRICAL SYSTEM:IGNITION. This Preliminary Information communication provides information to the technician about vehicles that the keyless entry is inoperative. Technician should inspect the ignition key cylinder door sticks in the up position. If the door is found open do not replace the ignition key cylinder, use a Lubriplate type of lubrication spray and lubricate the ignition key cylinder door. Insert the tip of the key in and out to verify the door of the cylinder is not sticking. |
| PIT5119E | 2018-05-21. Service bulletin. ELECTRICAL SYSTEM:IGNITION:ANTI-THEFT:CONTROL MODULE; ELECTRICAL SYSTEM:IGNITION. This Preliminary Information communication provides information to the technician about vehicles that the keyless entry is inoperative. Technician should inspect the ignition key cylinder door sticks in the up position. If the door is found open do not replace the ignition key cylinder, use a Lubriplate type of lubrication spray and lubricate the ignition key cylinder door. Insert the tip of the key in and out to verify the door of the cylinder is not sticking. |
| PIC6299 | 2018-05-21. Service bulletin. ENGINE. This Preliminary Information communicates several possibilities of what may be causing a fluctuating tachometer. |
| PIP5248D | 2018-05-21. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION. This Preliminary Information communication provides information to the technician on the steps need to diagnose and repair vehicles that may have stalling shudder and/or hard shifting into 1st gear or reverse vibration on launch (with excessive crankshaft end play). Technician will test to determine if the crank shaft end play is within specification 0.0015–0.0086 inch. If end play is found to be out of specification, remove engine and inspect for possible crankshaft thrust bearing and/or crankshaft for wear. Inspect thrust bearing for wear on one side and crankshaft on that “mating” surface. If the thrust bearing has three vertical channels worn off replace connecting rod bearings, main bearings, thrust bearing and crankshaft. If working on a Corvette the oil tank with lines and oil cooler are both required to be replaced if equipped. |
| PIC5932B | 2018-05-21. Service bulletin. EQUIPMENT:ELECTRICAL. This Preliminary Information communication provides information to the technician about customers that may complain of various concerns when using Bluetooth components. Technician should use the Preliminary Information to gather information from the customer on their Bluetooth device and the concern they are having before calling General Motors Technical Assistance Center. |
| PIP5498B | 2018-05-21. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary information communicatesA vehicle may have a concern ofDTCP050D settingalongwith a P0300 after a cold start up. White smoke and/or coolant odor may come from exhaust for an extended period of time at cold start as well. CauseCoolant getting into the cylinders, and provides direction for the repair. |
| PIP5212A | 2018-05-21. Service bulletin. ENGINE AND ENGINE COOLING; EQUIPMENT:MECHANICAL. This Preliminary Information communication provides information to the technician about vehicles that have run hot and or has a tick noise. Technician should inspect the head gaskets to ensure are not installed backwards. Technician should replace the head gasket if they are found installed backwards. |
| PIP5493C | 2018-05-21. Service bulletin. ENGINE; EQUIPMENT:MECHANICAL. This Preliminary information communicates diagnostic tips for misfires on active fuel management cylinders and engineering investigations into cylinder 6 misfire on XT5 and cylinder 4 misfire on LaCrosse both of which are 2017. |
| PIC6296 | 2018-05-21. Service bulletin. ELECTRICAL SYSTEM. This Preliminary Information communication provides information to the technician that when scanning a vehicle for Diagnostic Trouble Codes, may find a temporary loss of Human Machine Interface communication with Global Diagnostic System 2. Technician should not replace the Human Machine Interface for this concern, power cycling of the Human Machine Interface fuse should restore communication. Technician should be advised that the Human Machine Interface and Global Diagnostic System 2 interaction concern has been reported to engineering for root cause and correction. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.