WenmarOpen by Wenmar Pro

Service bulletins for the 2013 CAN-AM Spyder

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

80 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Body and frame are shown. Show all

Bulletins, newest first
Article 10-25(2)2018-03-05. Service bulletin. STRUCTURE:BODY:HOOD. Technical Service Tip (TST) informing dealers that BRP has noticed an increase in claims for the RT hood actuator switch. Switch inspection reveals the contact points inside the switch are exposed to high amperage. This causes an intermittent or permanently bad contact. The dealers are informed to inspect the hood actuator itself to see if the lever it pushes against is in-line and not obstructed. This could also happen if the front cargo is over packed and the pressure pressing up against the mechanism is beyond what the actuator can push and the switch gets too much amperage.
Bulletin 2013-32017-10-15. Service bulletin. EQUIPMENT; STRUCTURE; STEERING: STEERING WHEEL/HANDLE BAR. Warranty Bulletin for Parts and Accessories addressing a problem with the coating thickness that may cause damage to the finish of the part's surface (such as scratches). Dealers are to return all inventory with serial number between 200 and 388 and if parts are installed on vehicle, dealers are to contact a BRP service representative.
WC-2013-92014-05-05. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE; ELECTRICAL SYSTEM:WIRING:FUSES AND CIRCUIT BREAKERS; STRUCTURE:FRAME AND MEMBERS. CAN-AM MOTORCYCLE: WARRANTY CAMPAIGN INFORMATION REGARDING SEAL OF FRONT FUSE BOXES (WATER INFILTRATING EITHER OF FRONT FUSE BOXES), UPDATING ECM SOFTWARE (A LIMP HOME MODE MAY BE TRIGGERED WHEN ENGINE HAS STARTED, REPLACE UPPER BELT GUARD RETAINING SCREWS (THE BELT GUARD NOT SECURED PROPERLY BY RETAINING SCREWS. MODEL 2013 SPYDER. *PE

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.