WenmarOpen by Wenmar Pro

Service bulletins for the 2018 Cadillac XT5

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

1020 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Backup camera are shown. Show all

Bulletins, newest first
17-NA-3312023-02-28. Service bulletin. BACK OVER PREVENTION; EQUIPMENT. This informational bulletin provides information to the customer about the rear camera guidelines not being present at times due to the VBM taking over the rear camera option.
070601016G2022-06-13. Service bulletin. BACK OVER PREVENTION. This informational bulletin provides information on Internal Engine Noise or Damage After Oil Filter Replacement.
PIC6048N2022-02-14. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN; STEERING; AIR BAGS; LANE DEPARTURE; BACK OVER PREVENTION. This Preliminary Information communicates to the technician that some customers may comment on the operation of their haptic seat during a Lane Keep Assist event. Lane Keep Assist works differently than Lane Departure Warning. The Lane Keep Assist icon is solid amber, Forward Camera Module is actively commanding a torque to Electronic Power Steering. This means that the driver should also feel some feedback from the steering wheel. No Chimes or haptic in the seat. Lane Keep Assist icon is flashing amber; Forward Camera Module is actively commanding torque to Electronic Power Steering. This will also be accompanied with Lane Departure Warning chimes and haptic in the seat feedback based on the setting chosen in the vehicle settings. This will take place when the vehicle has crossed lane marking by (40 cm) or (15.75 in).
PIT5700C2021-09-13. Service bulletin. BACK OVER PREVENTION; ELECTRICAL SYSTEM. This Preliminary information communicates that a vehicle may come to the dealer with a "service front camera" message. The technician is instructed to use the data bus tool to determine if the front view camera module and active safety module are both communicating on the low speed bus. If the technician determines that one of the modules is not communicating on low speed the tech is instructed of areas to inspect the low speed communication line, 5060 for possible opens and repair them per SI.
21NA0632021-05-24. Service bulletin. BACK OVER PREVENTION. This technical bulletin provides a procedure on a flutter and/or buzz type noise heard from the rear of the vehicle.
21NA0302021-05-24. Service bulletin. BACK OVER PREVENTION. This service bulletin provides a procedure to correct a customer concern of Engine Noise and/or Belt Squeak, MIL Illuminated.
PIP5694C2021-04-19. Service bulletin. BACK OVER PREVENTION. This Preliminary information communicates noise condition that has been identified and the repair that is in process. A special Labor Operation was added for tracking purposes only. All models associated with the in process repair have been added to this PI.
17-NA-3312021-04-15. Service bulletin. BACK OVER PREVENTION: SENSING SYSTEM: CAMERA; EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY. Rear View Camera Guidelines Not Present at Times Condition Some customers may report that the Rear View Camera (RVC) guidelines are temporarily not available at times but the RVC will remain on during the concern. Additionally, no related DTCs will be found if this bulletin applies. One example of when this concern may be observed is if a customer quickly starts the car and immediately places the shifter in Reverse while the infotainment system is still in the initial boot up process. Cause This is a result of the RVC image being provided via an alternate robust RVC feed from the Video Bypass Module (NGI systems) or from the radio (BYOM2 and Info 3.0 systems). This alternate robust RVC feed is provided in the event that the primary RVC feed is not available for any reason just to ensure that the RVC image is always present when in reverse. Correction If this concern is experienced and no related codes are present, DO NOT replace any parts as it is normal for the RVC guidelines not to be present when the RVC image being displayed is from the alternate robust RVC feed. If this occurs after quickly starting the vehicle and immediately placing the shifter in Drive, the RVC guidelines can be displayed again in most cases if they are really needed by safely coming to a stop, placing the transmission in Park for a moment, and then shifting to Reverse again.
PIC6086G2021-01-25. Service bulletin. VISIBILITY; BACK OVER PREVENTION. This Preliminary Information communication provides the technician with steps to resolve the issue of an oily substance that may be found on the inside windshield surface, and appears to be leaking from the rear view mirror area. Technician will remove the moisture sensor and clean the glass and mounting bracket with alcohol wipe. If the gel separates from the sensor the sensor will need to be replaced.
PIC64242021-01-25. Service bulletin. AIR BAGS; BACK OVER PREVENTION:SOFTWARE. This Preliminary information communicates a condition where there is only newer hardware available when replacing the Active Safety Control Module. The newer hardware is not compatible with whatis currently loaded into the SPS programming system. Engineering is working on a new software set to address the concern.
19NA2502019-12-16. Service bulletin. BACK OVER PREVENTION. This technical bulletin provides repair information to correct a customer concern of Rear View Camera Guidance Lines Not Displayed At Times.
PIC6123C2019-06-03. Service bulletin. BACK OVER PREVENTION; ELECTRICAL SYSTEM; LANE DEPARTURE. This Preliminary Information communication provides information to the technician for the adaptive cruise control or lane keep assist unavailable message in the driver?s information center after the vehicle has been parked in direct sunlight and high ambient temperatures. The cameras electronic control unit?s internal operating temperature range is -40 degrees Celsius to 85 degrees Celsius. If the temperature of the electronic control unit of the camera module exceeds 85 degrees Celsius the image processor will no longer function resulting in adaptive cruise control and lane keep assist to be unavailable until the temperature falls to below the maximum operating temperature range
PIT5441C2019-04-08. Service bulletin. SERVICE BRAKES; EQUIPMENT; BACK OVER PREVENTION: SENSING SYSTEM: CAMERA; PARKING BRAKE; EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT:ELECTRICAL; LANE DEPARTURE. This Preliminary Information communication provides information to the technician the steps to diagnose and repair vehicles that may have an Object Detection System Message Diagnostic Trouble Codes U0075, U026A, U026B, U026C, U0265, U0268, and/or U0269 stored in the active safety module. Technician should inspect his Multiple Diagnostic Interface cable for damage. Technician should use the Multiple Diagnostic Interface on a like vehicle with object detection bus or theEL-47955-1 MDI 1, MDI 2 Self-Test Loopback Adapter,if there are no issues found finish with diagnosing the customer’s concern, if concern is present in the like vehicle replace the Multiple Diagnostic Interface cable.
17NA3752018-06-04. Service bulletin. BACK OVER PREVENTION: SENSING SYSTEM: CAMERA. This informational bulletin provides a diagnostic tip for rear vision camera image that is grainy, distorted and/or pixelated
17NA3312018-04-23. Service bulletin. BACK OVER PREVENTION: SENSING SYSTEM: CAMERA. This informational bulletin provides information to the customer about the rear camera guidelines not being present at times due to the VBM taking over the rear camera option.
PIP55452018-02-21. Service bulletin. BACK OVER PREVENTION; FUEL SYSTEM, GASOLINE; STEERING:HYDRAULIC POWER ASSIST:PUMP. This Preliminary information communicates a possible noise from the water pump causing a DTC and the diagnostics for the repair.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.