Service bulletins for the 2016 Cadillac Escalade
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
1826 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
By topic
Only bulletins with component: Backup camera are shown. Show all
| 15NA082B | 2024-02-12. Service bulletin. BACK OVER PREVENTION. Clunking Noise from Front of Vehicle During Turns and/or Bumps |
|---|---|
| 15NA082 | 2024-02-12. Service bulletin. BACK OVER PREVENTION. Clunking Noise from Front of Vehicle During Turns and/or Bumps |
| PIT5277C | 2023-12-04. Service bulletin. BACK OVER PREVENTION. No Audio Except Chime Distorted Or Inoperative Rear Camera -No Audio- Displayed On Audio Page In DIC. |
| PIP5395G | 2023-08-21. Service bulletin. BACK OVER PREVENTION; FUEL SYSTEM, GASOLINE. This Preliminary Information communication provides information to the technician on how to diagnose and repair vehicles that may have rattle or ticking noise that is louder inside the vehicle than outside. The noise may also sound like a lifter tick. If the noise is heard best at the fuel line and the sound will be real loud with a stethoscope. The fuel line will need to be replaced. |
| 070601016G | 2022-06-13. Service bulletin. BACK OVER PREVENTION. This informational bulletin provides information on Internal Engine Noise or Damage After Oil Filter Replacement. |
| PIC6086G | 2021-01-25. Service bulletin. VISIBILITY; BACK OVER PREVENTION. This Preliminary Information communication provides the technician with steps to resolve the issue of an oily substance that may be found on the inside windshield surface, and appears to be leaking from the rear view mirror area. Technician will remove the moisture sensor and clean the glass and mounting bracket with alcohol wipe. If the gel separates from the sensor the sensor will need to be replaced. |
| 150601002I | 2020-04-27. Service bulletin. BACK OVER PREVENTION; ENGINE. This technical bulletin provides a procedure to repair the valve lifter oil manifold and/or lifters to correct the customers concern of engine misfire, ticking noise and/or MIL Illuminated. |
| PIT5552D | 2020-04-13. Service bulletin. BACK OVER PREVENTION. This Preliminary information communicates repair information for the rear vision camera or surround vision camera image being: - Yellow - Blurry - Distorted - Image scrolling - Image with NO gridlines - Screen is blue with gridlines - Screen is blue with Service Rear Vision System message |
| PIT5622A | 2019-08-12. Service bulletin. BACK OVER PREVENTION. This Preliminary information communicates instructions dealer to inspect for a broken or damaged side objector sensor/module bracket if there is a "Side Detection System Unavailable" message displayed at startup. |
| PIC6123C | 2019-06-03. Service bulletin. BACK OVER PREVENTION; ELECTRICAL SYSTEM; LANE DEPARTURE. This Preliminary Information communication provides information to the technician for the adaptive cruise control or lane keep assist unavailable message in the driver?s information center after the vehicle has been parked in direct sunlight and high ambient temperatures. The cameras electronic control unit?s internal operating temperature range is -40 degrees Celsius to 85 degrees Celsius. If the temperature of the electronic control unit of the camera module exceeds 85 degrees Celsius the image processor will no longer function resulting in adaptive cruise control and lane keep assist to be unavailable until the temperature falls to below the maximum operating temperature range |
| PIT5487E | 2019-06-03. Service bulletin. ELECTRICAL SYSTEM; BACK OVER PREVENTION. This Preliminary Information communication provides information to the technician about vehicles that may have multiple messages on the driver information center Service Parking Assist System, Service Adaptive Cruise Control, Service Surround Vision Camera, and Service Driver Assist Message. The Front park, turn signal, day time running lights, and/or cornering lights may be inoperative. Some fuses may be blown F10DL, F19DR, F43UA, and/or F46DR. Also these diagnostic trouble codes may be set B2530, B2575, B2699, B258A, B2580, B2590, B2595, B2600, B2605, B260E, B260D, B3948, B3949, U0075, U209E, U026A, U026B, U026C, U0265, U0268, and/or U0269. These concerns could be caused by the fascia harness shorted at the end of the right front bumper bar. The front fascia may need to be removed to make repairs to the wiring harness if any damage is found. Technician will also relocate the harness to prevent the concern in the future. |
| PIT5441C | 2019-04-08. Service bulletin. SERVICE BRAKES; EQUIPMENT; BACK OVER PREVENTION: SENSING SYSTEM: CAMERA; PARKING BRAKE; EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT:ELECTRICAL; LANE DEPARTURE. This Preliminary Information communication provides information to the technician the steps to diagnose and repair vehicles that may have an Object Detection System Message Diagnostic Trouble Codes U0075, U026A, U026B, U026C, U0265, U0268, and/or U0269 stored in the active safety module. Technician should inspect his Multiple Diagnostic Interface cable for damage. Technician should use the Multiple Diagnostic Interface on a like vehicle with object detection bus or theEL-47955-1 MDI 1, MDI 2 Self-Test Loopback Adapter,if there are no issues found finish with diagnosing the customer’s concern, if concern is present in the like vehicle replace the Multiple Diagnostic Interface cable. |
| PIT5552C | 2019-03-11. Service bulletin. BACK OVER PREVENTION: SENSING SYSTEM: CAMERA. This Preliminary information communicates repair information for the rear vision camera or surround vision camera image being: - Yellow - Blurry - Distorted - Image scrolling - Image with NO gridlines - Screen is blue with gridlines - Screen is blue with Service Rear Vision System message |
| 17NA375 | 2018-06-04. Service bulletin. BACK OVER PREVENTION: SENSING SYSTEM: CAMERA. This informational bulletin provides a diagnostic tip for rear vision camera image that is grainy, distorted and/or pixelated |
| PIT5507D | 2018-05-21. Service bulletin. BACK OVER PREVENTION: WARNINGS. This Preliminary Information communication provides information to the technician about vehicles that may have a diagnostic trouble code U0159 set in the instrument panel cluster and /or the body control module. For vehicles equipped with Ultrasonic Park Assist System Regular Production Option Code UD5 or UD7 technician will use Service Programming System to reprogram the Parking Assist Control Module to correct this concern. Technician will need to inspect the front park assist sensors scallops/reliefs molded into the ring if previously replaced. Technician will need to replace the sensor rings with part number 84075328. |
| PIT5487D | 2018-05-21. Service bulletin. BACK OVER PREVENTION: SENSING SYSTEM: CAMERA; VEHICLE SPEED CONTROL:CRUISE CONTROL; EXTERIOR LIGHTING:HEADLIGHTS. This Preliminary Information communication provides information to the technician about vehicles that may have multiple messages on the driver information center Service Parking Assist System, Service Adaptive Cruise Control, Service Surround Vision Camera, and Service Driver Assist Message. The Front park, turn signal, day time running lights, and/or cornering lights may be inoperative. Some fuses may be blown F10DL, F19DR, F43UA, and/or F46DR. Also these diagnostic trouble codes may be set B2530, B2575, B2699, B258A, B2580, B2590, B2595, B2600, B2605, B260E, B260D, B3948, B3949,U0075, U209E, U026A, U026B, U026C, U0265, U0268, and/or U0269. These concerns could be caused by the fascia harness shorted at the end of the right front bumper bar. The front fascia may need to be removed to make repairs to the wiring harness if any damage is found. Technician will also relocate the harness to prevent the concern in the future. |
| 150601002E | 2018-05-07. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE; BACK OVER PREVENTION. This technical bulletin provides a procedure to repair the valve lifter oil manifold and/or lifters to correct the customers concern of engine misfire, ticking noise and/or MIL on. |
| 16-NA-107 | 2018-04-23. Service bulletin. EQUIPMENT:ELECTRICAL; EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.; BACK OVER PREVENTION: SENSING SYSTEM: CAMERA. This technical bulletin provides a procedure to reprogram the radio to correct a customer concern of radio Inoperative, blue Screen, AM clipping noise, HD on/off status not retained in stations, time lag on transitions, no audio with internal amp, and park assist symbol position wrong in rear view camera. |
| PIT5552B | 2018-03-12. Service bulletin. BACK OVER PREVENTION: SENSING SYSTEM: CAMERA. This Preliminary information communicates repair information for therear vision camera or surround vision camera image being: - Yellow - Blurry -Distorted - Image scrolling - Image with NO gridlines - Screen is blue with gridlines - Screen is blue with Service Rear Vision System message |
| PIP5446A | 2018-02-21. Service bulletin. BACK OVER PREVENTION. This Preliminary Information communication provides information to the technician about vehicles that have a Harsh Shift 1/2 and 2/3 and Sputter Applying Throttle Between 0 and 30%, Rough idle. Technician may find Diagnostic Trouble Codes P0101, P0171, P0172, P0174, and or P0175. Technician should inspect for cast flashing near the Mass Air Flow sensor as seen below. |
| PIP5168F | 2018-02-21. Service bulletin. POWER TRAIN:AXLE ASSEMBLY:AXLE SHAFT; BACK OVER PREVENTION; FUEL SYSTEM, GASOLINE. This Preliminary Information communication provides information to the technician on the steps to diagnose and repair vehicles that may have a no crank concern. Technician will need to check the valve train for movement when the engine is cranked. If the valve train is not moving while the crankshaft is moving the front cover will need to be removed to inspect for a sheared cam sprocket locator pin. If the cam sprocket locator pin has sheared, replace the engine assembly. If the valve train is rotating during inspection, disconnect the Camshaft Position sensor and check if the engine will start. If the engine starts front cover will need to be removed to inspect for a sheared cam sprocket locator pin. If the cam sprocket locator pin has sheared, replace the engine assembly. If the engine does not start with the Camshaft Position sensor disconnected the follow published “Engine Cranks But Does Not Run” diagnosis in Service Information. Also perform an Engine Compression Test and Cylinder Leakage Test in Service Information documents all results. If the Service Information procedures above isolate an engine mechanical concern then removed to inspect for a sheared cam sprocket locator pin. If the cam sprocket locator pin has sheared, replace the engine assembly. |
| PIT5552A | 2018-02-21. Service bulletin. COMMUNICATION; BACK OVER PREVENTION: CAMERA SYSTEM. This Preliminary information communicates repair information for therear vision camera or surround vision camera image being: - Yellow - Blurry -Distorted - Image scrolling - Image with NO gridlines - Screen is blue with gridlines - Screen is blue with Service Rear Vision System message |
| PIT5487C | 2017-08-31. Service bulletin. BACK OVER PREVENTION: CAMERA SYSTEM; EXTERIOR LIGHTING:BRAKE LIGHTS. This Preliminary Information communication provides information to the technician about vehicles that may have multiple messages on the driver information center Service Parking Assist System, Service Adaptive Cruise Control, Service Surround Vision Camera, and Service Driver Assist Message. The Front park, turn signal, day time running lights, and/or cornering lights may be inoperative. Some fuses may be blown F10DL, F19DR, F43UA, and/or F46DR. Also these diagnostic trouble codes may be set B2530, B2575, B2699, B258A, B2580, B2590, B2595, B2600, B2605, B260E, B260D, B3948, B3949,U0075, U209E, U026A, U026B, U026C, U0265, U0268, and/or U0269. These concerns could be caused by the fascia harness shorted at the end of the right front bumper bar. The front fascia may need to be removed to make repairs to the wiring harness if any damage is found. Technician will also relocate the harness to prevent the concern in the future. |
| PIC5611E | 2017-08-15. Service bulletin. EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.; BACK OVER PREVENTION: CAMERA SYSTEM. This Preliminary Information communication provides information to the technician about the rear view camera options on the vehicles equipped with rear view camera. The rear view camera brightness can be adjusted on some models while the transmission is in reverse and using the Menu or Select button. To turn off or on the guidelines in the rear view camera, use the radio display Config icon then Display, then the guidelines option. |
| PIC6220A | 2017-08-15. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; BACK OVER PREVENTION: CAMERA SYSTEM. This Preliminary Information communication provides information to the technician about vehicles with an intermittent loss of gridlines in the rear camera display screen and a "Service Rear Vision System" message that both happen at the same time. Technician should check for Diagnostic Trouble Codes and follow published Service Information diagnostics for the Diagnostic Trouble Codes. If not Diagnostic Trouble Codes stored and the concern was duplicated or the customer described the concern, dealer should communicate to the customer that we apologize for this inconvenience and that General Motors is currently evaluating this concern. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.