WenmarOpen by Wenmar Pro

Service bulletins for the 2016 Cadillac CT6

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

1371 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Bulletins, newest first
040089015T2019-03-18. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. This warranty administration bulletin provides policy information on required operating procedures.
030603004X2019-03-18. Service bulletin. EQUIPMENT:ELECTRICAL. This warranty administration bulletin provides policy information on the requirements for battery testing and warranty replacements.
010089010M2019-03-18. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. This informational bulletin provides information on comebacks prevention information and using customer concern verification sheets (CCVS).
PIC6073E2019-03-18. Service bulletin. EQUIPMENT:ELECTRICAL. This Preliminary Information communication provides information to the technician about the Media Oriented Systems Transport Bus Diagnostic Tool Kit (EL-51578) has been released to help diagnose any of the Media Oriented Systems Transport bus concerns. The kit contains header connectors that are installed to bypass Media Oriented Systems Transport bus modules. The bypass connector also contains a terminal for verifying Media Oriented Systems Transport control circuit voltages. Technician should review Media Oriented Systems Transport bus description and operation and Diagnostic Trouble Code U0028 diagnostic procedures.
PIT5214D2019-03-18. Service bulletin. SUSPENSION. This Preliminary Information communication provides information to the technician about vehicles that have had multiple repair attempts that are being performed on customer?s vehicles that exhibit vibration conditions without utilizing the support of General Motors Technical Assistance Center. If valid vibration frequency or Road Force Variation data has been collected and a repair attempt does not correct the customer complaint, contact General Motors Technical Assistance Center for further support. For any vehicles that remains unrepaired after being at the dealer for three days or more and a related bulletin or PI is not found, contact General Motors Technical Assistance Center for further support.
PIC5650F2019-03-18. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary Information communication provides information to the technician about vehicles that have an intermittent no crank, no start, or start stall concern with the security light coming on. Technician may find Diagnostic Trouble Codes B3055, B3060, and/or B3935. Technician should not replace any parts for this concern. If unable to duplicate the concern ask if the customer uses any Radio Frequency Identification Devices when the concern is present. Dealer should also direct their customers to the appropriate section in the Owner manuals that references that the device complies.
PIP5545B2019-03-18. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary information communicates a possible noise from the water pump causing a DTC and the diagnostics for the repair.
PIP5540B2019-03-18. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary information communicates to the technician the need to inspect the induction system for potential icing issues in very cold ambient temperatures. To allow the ice to melt so that it can be drained from the related components. That any of the listed DTC's may set with or without poor engine performance.
PIP4925B2019-03-18. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL. This preliminary information document communicates a tip on the way to diagnose possible induction or exhaust air leaks using the evaporative emission cart smoke machine and ultrasonic leak detector tools.
PIP5568E2019-03-11. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. This Preliminary information communicates there is an investigation into cause and correction for this group of DTC's setting together. (P0011, P0014, P0021, P0024). Revised to include the possibility of setting in pairs and some drivability concerns.
PIC63522019-03-11. Service bulletin. EQUIPMENT:ELECTRICAL. This Preliminary information communicates to inspect the LVDS cable connections if unable to learn the Night Vision camera.
PIP5540D2019-03-11. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary information communicates to the technician the need to inspect the induction system for potential icing issues in very cold ambient temperatures. To allow the ice to melt so that it can be drained from the related components. That any of the listed DTC's may set with or without poor engine performance.
PIP56282019-03-11. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary information communicates information that will need to be provided to TAC to aid in diagnosing if a vehicle comes in with misfire and DTC Codes P0300 - P0308 and/or P050D
PIT5353C2018-12-17. Service bulletin. EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.. This Preliminary Information communication provides information to the technician about what XM offerings are available for vehicles. A dealer or customer can access the website listed below for vehicle specific XM offerings and availability.
PIC6048J2018-12-17. Service bulletin. LANE DEPARTURE; SEATS. This Preliminary Information communicates to the technician that some customers may comment on the operation of their haptic seat during a Lane Keep Assist event. Lane Keep Assist works differently than Lane Departure Warning. The Lane Keep Assist icon is solid amber, Forward Camera Module is actively commanding a torque to Electronic Power Steering. This means that the driver should also feel some feedback from the steering wheel. No Chimes or haptic in the seat. Lane Keep Assist icon is flashing amber; Forward Camera Module is actively commanding torque to Electronic Power Steering. This will also be accompanied with Lane Departure Warning chimes and haptic in the seat feedback based on the setting chosen in the vehicle settings. This will take place when the vehicle has crossed lane marking by (40 cm) or (15.75 in).
PIC6265D2018-12-17. Service bulletin. VEHICLE SPEED CONTROL:CRUISE CONTROL; LANE DEPARTURE. This Preliminary information communicates that a vehicle may exhibit a Adaptive Cruise Control Unavailable and/or Lane Keep Assist Unavailable message. The technician may attempt to program the Active Safety Control Module (ASCM) and encounter a code E4399. The technician is advised if he encounters this concern to zero the MIC counter by placing the vehicle into and back out of "Transport Mode".
PIP5568C2018-12-17. Service bulletin. ENGINE. This Preliminary information communicates there is an investigation into cause and correction for this group of DTC's setting together. (P0011, P0014, P0021, P0024). Revised to include the possibility of setting in pairs and some drivability concerns.
PIP56012018-11-13. Service bulletin. EQUIPMENT. This Preliminary information communicates
PIT5099D2018-11-13. Service bulletin. EQUIPMENT:APPLIANCE:AIR CONDITIONER. This Preliminary Information communication provides information to the technician about vehicles that the Heater-Vent-Air Conditioning blows warm air. Before calling General Motors Technical Assistance Center technician will need to have high and low pressures, outside temperature, humidity, and vent temperature.
PIC6180A2018-11-13. Service bulletin. SEATS:FRONT ASSEMBLY:SEAT HEATER/COOLER; SEATS. This Preliminary Information communication provides information to the technician with diagnostic tips for auto heated and ventilated seat operation. The auto thermal seats function activates seat heating or ventilation based on outside air temperature and the cabin air temperature control error. The cabin air temperature control error is the difference between cabin air target temperature and actual cabin air temperature.
PIP5486F2018-11-13. Service bulletin. ENGINE. This Preliminary information communicates possible concerns and a diagnostic strategy to locate and repair various noises within the engine as well as some misfire causes.
PIP5534A2018-11-13. Service bulletin. ENGINE. This Preliminary information communicates additional diagnostics to assist the dealer technician with diagnosing and repairing trouble code P2097.
PIP55972018-11-13. Service bulletin. ENGINE; EQUIPMENT:OTHER:LABELS. This Preliminary information communicates to the technician where to find the engine identification tag and what information on that tag to use during programming of someengine control modules.
PIP55962018-11-13. Service bulletin. FUEL SYSTEM, GASOLINE; FUEL SYSTEM, GASOLINE:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS; FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP. This Preliminary information communicates that when removing the fuel line jumper hose care should be taken to be sure the line is reinstalled correctly to avoid a no/low fuel pressure situation.
PIC6137E2018-10-15. Service bulletin. ENGINE. This Preliminary Information communication provides information to the technician about vehicles that the engine stops running after extended idle with shifter in park. Dealer should communicate to the customer this condition is a normal operating characteristic of their vehicle. If the customer exits the vehicle with the fob in their possession while the engine is running and the shifter is left in park, the engine will shut off after 1 - 2.5 hours depending on model year. If the customer is sitting in the vehicle with the engine running and the fob is in the vehicle, the Passive Entry Passive Start system will reach out and look for the fob after 1 - 2.5 hours depending on model year. If the fob is located, the timer will reset an additional 1 - 2.5 hours depending on model year.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.