WenmarOpen by Wenmar Pro

Service bulletins for the 2017 Buick LaCrosse

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

1203 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Backup camera are shown. Show all

Bulletins, newest first
070601016G2022-06-13. Service bulletin. BACK OVER PREVENTION. This informational bulletin provides information on Internal Engine Noise or Damage After Oil Filter Replacement.
PIC6048N2022-02-14. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN; STEERING; AIR BAGS; LANE DEPARTURE; BACK OVER PREVENTION. This Preliminary Information communicates to the technician that some customers may comment on the operation of their haptic seat during a Lane Keep Assist event. Lane Keep Assist works differently than Lane Departure Warning. The Lane Keep Assist icon is solid amber, Forward Camera Module is actively commanding a torque to Electronic Power Steering. This means that the driver should also feel some feedback from the steering wheel. No Chimes or haptic in the seat. Lane Keep Assist icon is flashing amber; Forward Camera Module is actively commanding torque to Electronic Power Steering. This will also be accompanied with Lane Departure Warning chimes and haptic in the seat feedback based on the setting chosen in the vehicle settings. This will take place when the vehicle has crossed lane marking by (40 cm) or (15.75 in).
21NA0302021-05-24. Service bulletin. BACK OVER PREVENTION. This service bulletin provides a procedure to correct a customer concern of Engine Noise and/or Belt Squeak, MIL Illuminated.
PIC4996C2021-04-19. Service bulletin. ELECTRICAL SYSTEM; FUEL SYSTEM, GASOLINE; BACK OVER PREVENTION. This PI offers diagnostic tips to a technician when diagnosing a possible fuel level sensor concern. The tech is advised to ohm test the sensor at the terminals located on top of the fuel module while performing a sweep test. If the test fails the technician is instructed to replace the sensor and then perform the sweep test again. If the test passes the technician is instructed to reinstall the fuel module in the tank and if the test fails with the new sensor the technician is advised to replace the fuel module.
PIC64242021-01-25. Service bulletin. AIR BAGS; BACK OVER PREVENTION:SOFTWARE. This Preliminary information communicates a condition where there is only newer hardware available when replacing the Active Safety Control Module. The newer hardware is not compatible with whatis currently loaded into the SPS programming system. Engineering is working on a new software set to address the concern.
17NA3262020-01-27. Service bulletin. BACK OVER PREVENTION; SERVICE BRAKES, HYDRAULIC. This Technical bulletin provides information for rear brake pad replacement to correct a squeak type noise heard from the rear brakes when cold.
PIT5441C2019-04-08. Service bulletin. SERVICE BRAKES; EQUIPMENT; BACK OVER PREVENTION: SENSING SYSTEM: CAMERA; PARKING BRAKE; EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT:ELECTRICAL; LANE DEPARTURE. This Preliminary Information communication provides information to the technician the steps to diagnose and repair vehicles that may have an Object Detection System Message Diagnostic Trouble Codes U0075, U026A, U026B, U026C, U0265, U0268, and/or U0269 stored in the active safety module. Technician should inspect his Multiple Diagnostic Interface cable for damage. Technician should use the Multiple Diagnostic Interface on a like vehicle with object detection bus or theEL-47955-1 MDI 1, MDI 2 Self-Test Loopback Adapter,if there are no issues found finish with diagnosing the customer’s concern, if concern is present in the like vehicle replace the Multiple Diagnostic Interface cable.
17NA3752018-06-04. Service bulletin. BACK OVER PREVENTION: SENSING SYSTEM: CAMERA. This informational bulletin provides a diagnostic tip for rear vision camera image that is grainy, distorted and/or pixelated
17-NA-1792018-05-21. Service bulletin. EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.; BACK OVER PREVENTION: SENSING SYSTEM: CAMERA. This technical bulletin provides a procedure to reprogram the radio to correct brightness with the display for the rear view camera.
17NA3312018-04-23. Service bulletin. BACK OVER PREVENTION: SENSING SYSTEM: CAMERA. This informational bulletin provides information to the customer about the rear camera guidelines not being present at times due to the VBM taking over the rear camera option.
PIP5331E2018-02-21. Service bulletin. BACK OVER PREVENTION. This Preliminary Information communication provides information on a rattle, tick, or knock type noise. Any drivability concerns they should be addressed prior to the following diagnostic progression. A sound file or video with sound of the noise needs to be made prior to dis-assembly to help isolate to one area in the engine. There are four different steps to diagnosis the concern. This communication was updated to include the 2017 and 2018 model year.
PIP55452018-02-21. Service bulletin. BACK OVER PREVENTION; FUEL SYSTEM, GASOLINE; STEERING:HYDRAULIC POWER ASSIST:PUMP. This Preliminary information communicates a possible noise from the water pump causing a DTC and the diagnostics for the repair.
PIC5611E2017-08-15. Service bulletin. EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.; BACK OVER PREVENTION: CAMERA SYSTEM. This Preliminary Information communication provides information to the technician about the rear view camera options on the vehicles equipped with rear view camera. The rear view camera brightness can be adjusted on some models while the transmission is in reverse and using the Menu or Select button. To turn off or on the guidelines in the rear view camera, use the radio display Config icon then Display, then the guidelines option.
PIC62612017-08-15. Service bulletin. BACK OVER PREVENTION: CAMERA SYSTEM. This Preliminary information communicates that a customer may complain that the rear view camera display is too bright. The dealer is advised that updated software will be available at a later date and that no repairs should be made for this concern at this time.
PIC6220A2017-08-15. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; BACK OVER PREVENTION: CAMERA SYSTEM. This Preliminary Information communication provides information to the technician about vehicles with an intermittent loss of gridlines in the rear camera display screen and a "Service Rear Vision System" message that both happen at the same time. Technician should check for Diagnostic Trouble Codes and follow published Service Information diagnostics for the Diagnostic Trouble Codes. If not Diagnostic Trouble Codes stored and the concern was duplicated or the customer described the concern, dealer should communicate to the customer that we apologize for this inconvenience and that General Motors is currently evaluating this concern.
PIC62202017-05-15. Service bulletin. BACK OVER PREVENTION: CAMERA SYSTEM. THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN ABOUT VEHICLES WITH AN INTERMITTENT LOSS OF GRIDLINES IN THE REAR CAMERA DISPLAY SCREEN AND A "SERVICE REAR VISION SYSTEM" MESSAGE THAT BOTH HAPPEN AT THE SAME TIME. TECHNICIAN SHOULD CHECK FOR DIAGNOSTIC TROUBLE CODES AND FOLLOW PUBLISHED SERVICE INFORMATION DIAGNOSTICS FOR THE DIAGNOSTIC TROUBLE CODES. IF NOT DIAGNOSTIC TROUBLE CODES STORED AND THE CONCERN WAS DUPLICATED OR THE CUSTOMER DESCRIBED THE CONCERN, DEALER SHOULD COMMUNICATE TO THE CUSTOMER THAT WE APOLOGIZE FOR THIS INCONVENIENCE AND THAT GENERAL MOTORS IS CURRENTLY EVALUATING THIS CONCERN.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.