WenmarOpen by Wenmar Pro

Service bulletins for the 2013 Buick Encore

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

1628 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Windshield are shown. Show all

Bulletins, newest first
PIC6086E2018-11-26. Service bulletin. VISIBILITY; VISIBILITY:WINDSHIELD. This Preliminary Information communication provides the technician with steps to resolve the issue of an oily substance that may be found on the inside windshield surface, and appears to be leaking from the rear view mirror area. Technician will remove the moisture sensor and clean the glass and mounting bracket with alcohol wipe. If the gel separates from the sensor the sensor will need to be replaced.
060089026N2018-06-04. Service bulletin. ELECTRICAL SYSTEM; VISIBILITY:SUN/MOON ROOF ASSEMBLY; STRUCTURE:BODY:DOOR; POWER TRAIN:TRANSFER CASE (4-WHEEL DRIVE); VISIBILITY:WINDSHIELD; ELECTRONIC STABILITY CONTROL (ESC). This warranty bulletin provides labor operation numbers for customer concerns that cant be duplicated.
05-08-48-001C2018-06-04. Service bulletin. EQUIPMENT; VISIBILITY:WINDSHIELD. This informational bulletin provides a revision for 05-08-48-001B to add 2010-2014 model years and update Labor Operation.
PI12902018-05-29. Service bulletin. VISIBILITY:REARVIEW MIRRORS/DEVICES:INTERIOR; EQUIPMENT; VISIBILITY:WINDSHIELD. This preliminary bulletin provides a procedure to replace the windshild to correct the customers concern of a loose mirrior and/or bracket fell off.
05-08-48-001D2018-05-29. Service bulletin. VISIBILITY:WINDSHIELD; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. This warranty administration bulletion provides the dealer technician information and guidelines for claiming a windshield.
PI0754A2018-04-16. Service bulletin. VISIBILITY:WINDSHIELD. This preliminary bulletin explains the marks in the glass are normal when wearing polarized sunglasses and do not replace any glass for this reason.
PIC60862017-08-15. Service bulletin. VISIBILITY:REARVIEW MIRRORS/DEVICES; VISIBILITY:WINDSHIELD. This Preliminary Information communication provides information to the technician about vehicles that may have an oily substance is found on the inside windshield surface and appears to be leaking from the rear view mirror area. Technician should inspect the moisture sensor for being the source of the leak, if found to be leaking, carefully remove the moisture sensor. Clean the glass surface and sensor bracket with an isopropanol alcohol wipe until the surfaces are clean, then re-install the moisture sensor.
PIC6086C2017-08-15. Service bulletin. VISIBILITY:WINDSHIELD; VISIBILITY:REARVIEW MIRRORS/DEVICES:EXTERIOR. This Preliminary Information communication provides the technician with steps to resolve the issue of an oily substance that may be found on the inside windshield surface, and appears to be leaking from the rear view mirror area. Technician will remove the moisture sensor and clean the glass and mounting bracket with alcohol wipe. If the gel separates from the sensor the sensor will need to be replaced.
PIC6086B2017-05-05. Service bulletin. VISIBILITY:WINDSHIELD. THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES THE TECHNICIAN WITH STEPS TO RESOLVE THE ISSUE OF AN OILY SUBSTANCE THAT MAY BE FOUND ON THE INSIDE WINDSHIELD SURFACE, AND APPEARS TO BE LEAKING FROM THE REAR VIEW MIRROR AREA. TECHNICIAN WILL REMOVE THE MOISTURE SENSOR AND CLEAN THE GLASS AND MOUNTING BRACKET WITH ALCOHOL WIPE. IF THE GEL SEPARATES FROM THE SENSOR THE SENSOR WILL NEED TO BE REPLACED.
PIC-6086-A2016-08-24. Service bulletin. VISIBILITY:WINDSHIELD. THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES THE TECHNICIAN WITH STEPS TO RESOLVE THE ISSUE OF AN OILY SUBSTANCE THAT MAY BE FOUND ON THE INSIDE WINDSHIELD SURFACE, AND APPEARS TO BE LEAKING FROM THE REAR VIEW MIRROR AREA. TECHNICIAN WILL REMOVE THE MOISTURE SENSOR AND CLEAN THE GLASS AND MOUNTING BRACKET WITH ALCOHOL WIPE. IF THE GEL SEPARATES FROM THE SENSOR THE SENSOR WILL NEED TO BE REPLACED.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.