Service bulletins for the 2019 BMW X7
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
463 on file from NHTSA, as of 2026-10-19.
By type
By component
By topic
Only bulletins with component: Suspension are shown. Show all
| B310122 | 2024-04-01. Service bulletin. SUSPENSION. During inspection and/or diagnosis there is noticeable dirt/grease buildup on the axles near the inner and/o router CV boots. |
|---|---|
| B370219 | 2019-07-22. Service bulletin. SUSPENSION. CHECKING IF REQUIRED REPLACING REAR RIDE HEIGHT SENSOR CONTROL RODS. The holders of both control rods for the ride height sensors on the rear axle may have been mounted incorrectly (the locking tabs are not correctly locked). |
| B370119 | 2019-06-24. Service bulletin. WHEELS; SUSPENSION; ELECTRONIC STABILITY CONTROL:AUTOMATIC (ASC). Service Information May 2019 Special Suspension Systems B37 01 19 Technical Service CHECK CONTROL MESSAGE (CCM) DRIVING COMFORT RESTRICTED. Chassis stabilization warning and CCM Driving comfort restricted. Vertical Dynamics Platform (VDP) fault code for ride height sensor implausible value. Any of the following fault codes may be logged depending on the respective wheel ride height sensor0x030C5A 0x030C5B 0x030C5C 0x030C5D The ride height sensor linkage became disconnected. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.