Service bulletins for the 2025 BMW X6
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
69 on file from NHTSA, as of 2026-10-19.
By type
By component
Only bulletins with component: Engine are shown. Show all
| B110326 | 2026-08-26. Service bulletin. ENGINE. This Service Bulletin provides instructions to clean the intake valves using the BMW Carbon Blaster Tool P/N 81 29 2 208 034 and the S68T / XB1T Kit P/N 83 30 5 BAD 3D5. Refer to SI B04 12 11 for existing documentation about the carbon blaster tool and SI B04 02 26 for the S68T /XB1T tool kit. |
|---|---|
| B063926 | 2026-08-03. Other. ENGINE. Starter Generator Return |
| B120326 | 2026-07-31. Emissions. ENGINE. Due to an implementation error in various OBD diagnostics in the vehicle's control units, in very rare cases itmay happen that stored fault memory codes (DTCs) and the MIL (warning light) are not automaticallydeleted even though the underlying malfunction has already been rectified. This does not comply with the statutory OBD specifications. |
| B110326 | 2026-07-31. Service bulletin. ENGINE. This Service Bulletin provides instructions to clean the intake valves using the BMW Carbon Blaster Tool |
| B120626DCS | 2026-06-02. Other. ENGINE. Update - Variable Valve Timing |
| B120626 | 2026-06-01. Service campaign. ENGINE. DELIVERY STOP: VARIABLE VALVE TIMING |
| B120326 | 2026-03-30. Emissions. UNKNOWN OR OTHER; ENGINE. PROGRAM CONTROL UNITS (OBD) |
| B064825 | 2025-10-10. Other. ENGINE. Oil Drain Plug Return |
| B110525 | 2025-09-22. Service campaign. ENGINE. Due to an assembly error the upper oil pan screws may not have been torqued correctly. |
| B064325 | 2025-09-06. Other. ENGINE. Oil Line Return |
| B110525 | 2025-09-06. Service campaign. ENGINE. Due to an assembly error the upper oil pan screws may not have been torqued correctly. |
| B110525 | 2025-08-13. Service campaign. ENGINE. Due to an assembly error the upper oil pan screws may not have been torqued correctly. |
| B110425 | 2025-08-13. Service campaign. ENGINE. Due to an assembly error the upper oil pan screws may not have been torqued correctly. |
| B110325 | 2025-07-28. Service bulletin. ENGINE. The “Check Engine Oil Level” warning is displayed while driving due to one of the following: Shortly after a detailed measurement has been carried out Shortly after engine oil has been topped up Shortly after an engine oil service has been carried out |
| B120725 | 2025-05-31. Service bulletin. ELECTRICAL SYSTEM; ENGINE. A quality check revealed that the DME in these vehicles has a programming error. This results in a deviation of the fuel-air mixture in the internal combustion engine. |
| B370225 | 2025-05-27. Service campaign. ENGINE. The air line on the air suspension supply system may not be properly installed. In the event of a fault, residual pressure is maintained in the struts and corresponding check control message. |
| B061325 | 2025-03-21. Other. ENGINE. Starter Return |
| B067724 | 2024-10-28. Other. ENGINE. Heat Management Module Return |
| B110824 | 2024-10-19. Service bulletin. ENGINE. DELIVERY STOP: CHECK PCV SYSTEM |
| B110324 | 2024-07-25. Service campaign. ENGINE. DELIVERY STOP: OIL PRESSURE SENSOR |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.