WenmarOpen by Wenmar Pro

Service bulletins for the 2023 BMW X2

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

40 on file from NHTSA, as of 2026-10-19.

Warranty extensions
B0102242026-08-03. ENGINE. The EVAP systems purge (vent) valve limited warranty for defects in materials and / or workmanship has been extended to 15 years / 150,000 miles as determined from the original first in-service / delivery date.
B0102242026-05-18. ENGINE. The EVAP systems purge (vent) valve limited warranty for defects in materials or workmanship has been extended to 15 years / 150,000 miles as determined from the original in-service date.

A warranty extension may pay for a repair after the basic warranty has ended. Read the document for which vehicles and which repair it covers.

By type

By component

Bulletins, newest first
B0102242026-08-03. Warranty extension. ENGINE. The EVAP systems purge (vent) valve limited warranty for defects in materials and / or workmanship has been extended to 15 years / 150,000 miles as determined from the original first in-service / delivery date.
B1203262026-07-31. Emissions. ENGINE. Due to an implementation error in various OBD diagnostics in the vehicle's control units, in very rare cases itmay happen that stored fault memory codes (DTCs) and the MIL (warning light) are not automaticallydeleted even though the underlying malfunction has already been rectified. This does not comply with the statutory OBD specifications.
B0102242026-05-18. Warranty extension. ENGINE. The EVAP systems purge (vent) valve limited warranty for defects in materials or workmanship has been extended to 15 years / 150,000 miles as determined from the original in-service date.
B1203262026-03-13. Emissions. ELECTRICAL SYSTEM. BMW AG is conducting Voluntary Emissions Recall (effective March 11, 2026) on certain Model Year 2023 -2026 BMW vehicles that were produced between January 14, 2022, and September 16, 2025.
B3301262026-03-13. Service bulletin. WHEELS. 1. Noise complaint: Humming or clicking type noise in the speed range of 15 – 65 mph can be heard from the rear axle. Seeattached video “V33 01 26 Humming” and “V33 02 26 Clicking” The noise may be amplified depending on road speed. Or 2. Fault memory entry: Customer has Dynamic Stability Control malfunction indicator lamp and/or related Check Control Message. The following fault codes are found in the Integrated Brake module fault memory: 4809B7: Wheel speed sensor - rear left - tooth missing 4809C2: Wheel speed sensor - rear right - tooth missing 480AB4: Wheel speed sensor - rear right – noise monitoring 480AAD: Wheel speed sensor - rear left – noise monitoring
B3301262026-02-23. Service bulletin. SUSPENSION. 1. Noise complaint: Humming or clicking type noise in the speed range of 15 – 65 mph can be heard from the rear axle. Seeattached video “V33 01 26 Humming” and “V33 02 26 Clicking” The noise may be amplified depending on road speed. Or 2. Fault memory entry: Customer has Dynamic Stability Control malfunction indicator lamp and/or related Check Control Message. The following fault codes are found in the Integrated Brake module fault memory: 4809B7: Wheel speed sensor - rear left - tooth missing 4809C2: Wheel speed sensor - rear right - tooth missing 480AB4: Wheel speed sensor - rear right – noise monitoring 480AAD: Wheel speed sensor - rear left – noise monitoring
B1204252025-06-17. Emissions. ELECTRICAL SYSTEM. EMISSIONS RECALL 25E-A02: PROGRAM CONTROL UNITS
B3404252025-04-29. Service campaign. ELECTRICAL SYSTEM. As a result of a data input error, certain fault memories are permanently stored. The permanent storage offault memories does not comply with the legal specifications of the authority (California Air Resources Board– CARB). The fault has no effect on the use of the vehicle by the customer.
B4102252025-04-28. Service bulletin. STRUCTURE:BODY. While driving on a smooth and/or uneven road, a “popping” sound is heard from the bottom of the C-pillar area. This can occur on one and/or both sides on the vehicle C-pillars.
B1204252025-04-28. Service campaign. ELECTRICAL SYSTEM. As a result of a data input error, certain fault memories are permanently stored. The permanent storage offault memories does not comply with the legal specifications of the authority (California Air Resources Board– CARB). The fault has no effect on the use of the vehicle by the customer.
B3404252025-04-17. Service campaign. SERVICE BRAKES. As a result of a data input error, certain fault memories are permanently stored. The permanent storage offault memories does not comply with the legal specifications of the authority (California Air Resources Board– CARB). The fault has no effect on the use of the vehicle by the customer.
B2801232025-03-24. Service bulletin. POWER TRAIN. Check control message (790) “Emergency gearbox release activated” is displayed immediately after starting the engine. This applies only to U11 equipped with the 7-speed M-DCT transmission.
B6130242024-12-31. Service campaign. ELECTRICAL SYSTEM. Due to a software error in the Basic Central Platform (BCP), Remote Software Upgrade (RSU) is no longerpossible.
B2802242024-12-31. Service campaign. POWER TRAIN. Micro-movements combined with frictional corrosion can increase wear on the longitudinal splined connection between the double clutch transmission (DCT) and the transfer box.
B5129242024-12-31. Service bulletin. STRUCTURE:BODY. The tailgate/trunk will not latch when closed.
B6529242024-10-19. Service bulletin. ELECTRICAL SYSTEM. During a parking maneuver with activated Park Distance Control (PDC), intermittently the parking instructions displayed in the Central Information Display (CID) are shown in German. The text in the instructions read: "Mit dem Parken beginnen" or “Einparken Starten” (start parking).
B5202242024-09-01. Service bulletin. ELECTRICAL SYSTEM. Customer states they started to receive Check Control messages for the driver’s seat at the end of eachdriving cycle: One or more of the following check control messages (CCM) were present at that time: CCM 434 Seat calibration required. CCM 108 Driver restraint system. Eventually multiple restarts after they first noticed the CCM the seat stopped functioning, the air bag warninglamp illuminated in the instrument cluster, and they received a new Check Control message: CCM 97 Restraint system. There are now 6 DTC faults stored: ACSM6 Air Bag module 930D86 - Function restraint system driver restricted. C95432 - seat module Driver (seat memory), message status backrest locking standardization required. C95434 - seat module Driver (seat memory), message status backrest locking standardizationrecommended. FAS_I20 Driver's Seat module 8029F5 - initialization seat: limited seat adjustment due to missing calibration 802A03 - Functions seat adjustment FAS limited available. 802A05 - ÜKB: Shut-off ÜKB because of missing calibration. Also, one or both of the following check control messages (CCM) may currently be present: CCM 108 “Driver restraint system” CCM 109 “Passenger restraint system” The seat initialization and memory has been lost. Or Repeat failure of seat initialization after completing the test module via ISTA.
B2802242024-09-01. Service campaign. POWER TRAIN. Micro-movements combined with frictional corrosion can increase wear on the longitudinal splinedconnection between the double clutch transmission (DCT) and the transfer box.
B5202242024-08-02. Service bulletin. ELECTRICAL SYSTEM. The seat initialization and memory has been lost; Or Repeat failure of seat initialization after completing the test module via ISTA. One or both of the following check control messages (CCM) may be present: CCM 108 “Driver restraint system” CCM 109 “Passenger restraint system”
B6604242024-07-25. Service bulletin. VISIBILITY/WIPER. The washer fluid cleaning system has air remaining in its components, and/or the fluid lines after a previous repair has been performed. The previous repair may have involved draining, opening, and replacingcomponents in the system.
B6509242024-07-25. Service campaign. ELECTRICAL SYSTEM. Quality improvements and robustness measures are to be implemented on the affected vehicles via thissoftware update. The software update improves functions in the following areas of the vehicle: Bluetooth malfunctions The start-up phase of the HU has been shortened (faster start of the operating system) The number of disconnections from Apple CarPlay have been reduced Vehicle access and the drive-ready state have been improved The AC charging abort error has been fixed Remote Control Parking without function
B2802242024-07-25. Service campaign. POWER TRAIN. Micro-movements combined with frictional corrosion can increase wear on the longitudinal splinedconnection between the double clutch transmission (DCT) and the transfer box.
B5103242024-07-01. Service bulletin. STRUCTURE:BODY. While opening any of the doors, a groaning sound is heard from the door brake.
B6510242024-07-01. Service campaign. ELECTRICAL SYSTEM. Quality improvements and robustness measures are to be implemented on the affected vehicles via thissoftware update. The software update improves functions in the following areas of the vehicle: Bluetooth malfunctions The start-up phase of the head unit (HU) has been shortened (faster start of the operating system) The number of disconnections from Apple CarPlay have been reduced Vehicle access and the drive-ready state have been improved The AC charging abort error has been fixed Remote Control Parking without function
B0640242024-06-01. Service bulletin. STEERING. Steering Wheel Module Return

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.