WenmarOpen by Wenmar Pro

Service bulletin B330126

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id11028922
Published by NHTSA2026-02-23
Manufacturer's numberB330126
Manufacturer's date2026-02-18
NHTSA componentSUSPENSION

NHTSA's summary

1. Noise complaint: Humming or clicking type noise in the speed range of 15 – 65 mph can be heard from the rear axle. Seeattached video “V33 01 26 Humming” and “V33 02 26 Clicking” The noise may be amplified depending on road speed. Or 2. Fault memory entry: Customer has Dynamic Stability Control malfunction indicator lamp and/or related Check Control Message. The following fault codes are found in the Integrated Brake module fault memory: 4809B7: Wheel speed sensor - rear left - tooth missing 4809C2: Wheel speed sensor - rear right - tooth missing 480AB4: Wheel speed sensor - rear right – noise monitoring 480AAD: Wheel speed sensor - rear left – noise monitoring

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Suspension

Vehicles listed
BMW X12023, 2024
BMW X22023, 2024

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Other bulletins for the same vehicles and component
B3101262026-02-23. Service bulletin. When driving over an uneven road surface, a “thumping” noise can be heard from the front axle. Seeattached video V 31 01 26. Under certain weather conditions, a “groaning” noise may be heard during steering movements
B3101222024-09-29. Service bulletin. During inspection and/or diagnosis there is noticeable dirt/grease buildup on the axles near the inner and/or outer CV boots.
B3101222024-04-01. Service bulletin. During inspection and/or diagnosis there is noticeable dirt/grease buildup on the axles near the inner and/o router CV boots.