WenmarOpen by Wenmar Pro

Service bulletins for the 2018 BMW M5

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

208 on file from NHTSA, as of 2026-10-19.

By type

By component

Bulletins, newest first
B8401202020-02-18. Service bulletin. ELECTRICAL SYSTEM. BMW CONNECTEDDRIVE SERVICES ARE NOT AVAILABLE: The BMW ConnectedDrive services are not available for an extended period. This may include: Calls in the BMW Assistance app (Concierge Service) Vehicle data and status in the BMW ConnectedDrive app Remote services Remote 3D View Real Time Traffic Information (RTTI) Weather News Software error in Advanced Telematics Module 2 (ATM2).
B6608172020-02-18. Service bulletin. BACK OVER PREVENTION; ELECTRICAL SYSTEM:SOFTWARE. REAR VIEW CAMERA FAILS TO DISPLAY IMAGE: This Service Information Bulletin (Revision 5) replaces SI B66 08 17 dated March 2018. Sporadically when the rear view camera is activated no image appears in the display. The rear view camera can be activated by either: 1. Selecting reverse with the shift selector 2. Camera activation via the button on the center console Camera function returns after a terminal change. Note: This error situation can rarely if ever be duplicated on demand. Head-unit interface software start-up synchronization error for the rear view camera.
B1204192020-02-18. Service bulletin. ENGINE AND ENGINE COOLING. DME FAULT MEMORY ENTRY FOR THE CRANKSHAFT SENSOR: This Service Information Bulletin (Revision 1) replaces SI B12 04 19 dated February 2019. Technicians may notice this fault logged during a diagnostic session: Fault code: Control module: Fault Text: 160021 DME Crankshaft sensor: general loss of synchronism Environmental conditions are vehicle speed 0 (stationary) and engine speed less than 1500 rpm. There is no customer-facing symptom nor related check control message displayed. Phantom/pseudo fault due to unsuitable DME software. Background: After parking the vehicle and turning off the engine both DME control units go into sleep mode at different times. The DME of cylinder bank 2 ("secondary") goes into sleep mode first The DME of cylinder bank 1 ("primary") is still awake and can experience a reduction in signal voltage for the crankshaft sensor signal This signal change can mistakenly be evaluated as a skipped crankshaft sensor cog by the DME. If the engine is started while the primary DME is still awake this causes a brief loss of synchronization with the secondary DME. Fault 160021 is logged after three (3) consecutive engine starts with this momentary loss of synchronization. Note: Starting the engine after the primary DME has also gone into sleep mode will avoid the loss of synchronization.
B1202202020-02-18. Service bulletin. ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM. THE MIL IS ILLUMINATED WITH OXYGEN SENSOR FAULTS STORED: One of the following faults may be stored in the digital motor electronics (DME) either as part of diagnosing a different issue; and/or an illuminated malfunction indicator lamp (MIL). Fault code Control module Fault code text 13900 DME Oxygen sensor after catalytic converter from rich to lean: Delayed response Or: 12B011 DME Oxygen sensor 2 after of catalytic converter from rich to lean: Delayed response This situation is not associated with any drivability complaints. An unfavorable DME diagnostic calibration may cause a fault code to be erroneously stored. These faults will cause the MIL to illuminate.
B6210192020-01-21. Service bulletin. SERVICE BRAKES. INCORRECT CONDITION BASED SERVICE DATA FOR BRAKE FLUID SERVICE. "Brake fluid service due since 12/2001" is displayed in the instrument cluster although the vehicle is only a maximum of 1 year old. Software error in the KOMBI (Instrument Cluster).
B6209192020-01-21. Service bulletin. ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. INSTRUMENT CLUSTER REMAINS DARK AFTER STARTING THE VEHICLE: Instrument cluster remains dark after starting the vehicle. After a restart normal functionality is restored. Software error in the KOMBI (Instrument Cluster).
B5113192020-01-21. Service bulletin. LATCHES/LOCKS/LINKAGES. DOOR LATCHING COMPLAINTS IN COLD WEATHER: Below freezing ambient temperatures: One or more doors (front or rear) may not open when attempting to enter or After opening they may not correctly latch A leaking seal on the outer Bowden release cable may allow water to enter the cable sheathing and freeze.
B3410192020-01-21. Service bulletin. SERVICE BRAKES. HELPFUL INFORMATION FOR CUSTOMER DISCUSSIONS REGARDING MOTORSPORT VEHICLE BRAKES: Note for customer deleted: If the noise does not disappear despite the attempts to regenerate the brake a repair is required.
B3303192020-01-21. Service bulletin. SUSPENSION. SERVICE ACTION: CHECKING THE THRUST WASHER AND THE REAR AXLE ANTI-ROLL BAR. On vehicles with an incorrect setting of the thrust washer contact between the thrust washer and the sway bar may occur over time. This can lead to corrosion and breakage of the anti-roll bar. Installation error of the right side rear axle thrust washer during manufacturing.
B6510192019-12-16. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM; EQUIPMENT ADAPTIVE/MOBILITY. ENGINE SPEED DEPENDENT NOISE DURING AUDIO PLAYBACK: Integration level updated. There is an engine speed-dependent noise heard through the speakers during audio playback. Software error in the Receiver Audio Module (RAM) control unit.
B6201192019-12-16. Service bulletin. EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. INSTRUMENT CLUSTER AND ONBOARD COMPUTER INTERMITTENTLY INOPERATIVE: Instrument Cluster (KOMBSP18) functions are intermittently inoperative including: On-board Computer (BC) button on turn signal stalk (BC button shown at left) Radio displays Menu button Turn signal displays Arrows on multifunction steering wheel MFL thumbwheel control.
B6123152019-12-16. Service bulletin. EQUIPMENT; VISIBILITY:WINDSHIELD WIPER/WASHER. Low Washer Fluid Warning Light is illuminated when the Washer Fluid Tank is Full : The low washer fluid warning is illuminated even though the washer fluid reservoir is full. There are no faults stored in the system for the washer fluid level switch. A non-approved washer fluid was used that is silicone-based. Silicone-based fluids are not compatible with the contactless capacitive level sensor. Fluids that contain a silicone additive are normally colored other than blue.
B3410192019-12-16. Service bulletin. SERVICE BRAKES, HYDRAULIC; EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT. HELPFUL INFORMATION FOR CUSTOMER DISCUSSIONS REGARDING MOTORSPORT VEHICLE BRAKES: INFORMATION Inform the customer during a consultation that the M Compound (standard equipment) and M Carbon Ceramic (optional) brakes are high-performance brake systems which are designed for sporty dynamic driving styles. As a side effect of the highest possible brake performance customers are likely to hear noises due to the extremely resilient materials.
B6514192019-10-21. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE; ELECTRICAL SYSTEM:12V/24V/48V BATTERY. HEAD UNIT NBT EVO (HU-H2) PROGRAMMING ABORT: The CID screen may light up blue. When this occurs A battery reset is not successful in restoring head unit operation Software error in the Bootloader file (BTLD) of the head unit.
B7204172019-10-21. Service bulletin. SEAT BELTS:FRONT:WARNING LIGHT/DEVICES. FALSE WARNINGS THAT THE FRONT PASSENGER SEAT IS OCCUPIED WITHOUT THE SEAT BELT BUCKLED: Acoustic and visual warnings indicate that the front passenger seat is occupied and the safety belt is not fastened when the seat is actually unoccupied.
B6623192019-10-21. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. DRIVERS ASSISTANCE SYSTEM: CHECK CONTROL MESSAGE IS DISPLAYED. The Driver Assistance System limited warning message is displayed.
B5124192019-09-23. Service bulletin. STRUCTURE; EQUIPMENT. CRACKING NOISE FROM DASHBOARD TRIM. A cracking noise is present from the area of the dashboard trim when heating or cooling the vehicle. Thermal expansion of the plastic components of the decorative trim causes cracking noises.
B6515192019-09-23. Service bulletin. EQUIPMENT. SECURITY IMPROVEMENTS FOR CONNECTEDDRIVE. Security patches for non-safety critical vulnerabilities in BMW head units Entry Nav Entry Media NBT and NBT EVO.
B4103192019-08-19. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT. Streaks/blisters in the carbon fiber roof after removal of the Bodyguard film: Streaks or blisters are present (circled) in the carbon fiber roof.
B1305192019-08-19. Service bulletin. ENGINE; EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT. DELIVERY STOP: CAMSHAFT SENSORS. On affected vehicles the camshaft sensors will be inspected and if necessary replaced.
B6619192019-07-22. Service bulletin. ELECTRICAL SYSTEM. COMFORT ACCESS AND COMFORT GO NOT POSSIBLE. Vehicle cannot be opened/locked or started via Comfort Access. Electrostatic charge puts the remote control key into a deep sleep.
B6514192019-07-22. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. HEAD UNIT NBT EVO (HU-H2) PROGRAMMING ABORT. During programming several aborts can occur in the head unit NBT EVO (HU-H2).
B3603192019-07-22. Service bulletin. TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS. INCORRECT DISPLAY OF TIRE SETPOINT INFLATION PRESSURES IN THE CONTROL DISPLAY. Increased tire set point inflation pressures are displayed when checking the tire pressure setting in the Control Display (CD).
B1221192019-07-22. Service bulletin. ELECTRICAL SYSTEM:IGNITION:SWITCH. HIGH ENGINE SPEED IMMEDIATELY AFTER STARTING. In rare circumstances after the engine is started with the Start-Stop button the engine speed may immediately increase to a high constant RPM (approximately 3000 rpm).
B8402142019-06-24. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. INFORMATION New information provided by this revision is preceded by this symbol. This Service Information bulletin replaces SI B84 02 14 dated September 2018.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.