WenmarOpen by Wenmar Pro

Recalls that may apply to the 2008 BMW K 1200 GT

A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.

By component

United States: NHTSA, as of 2026-10-19
20V4710002020-08-10. FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP. BMW of North America, LLC (BMW) is recalling certain 2009-2011 K1300 (S, GT), 2010-2011 S1000 RR, 2005-2011 R1200 (GS, GS Adventure, R, RT, S, ST), 2006-2010 HP2 (Enduro, Megamoto, Sport), 2005-2008 K1200 (R, R Sport, S, GT), and 2012 K1600 (GT, GTL) motorcycles that were repaired under recall 13V-617 with the support ring remedy and where the fuel pump was not replaced at a later date. This recall involves the fuel pump, and also the auxiliary fuel pump as applicable. The affected motorcycles have a fuel pump flange that may crack, possibly resulting in a fuel leak while the engine is running.
15V1410002015-03-11. WHEELS:LUGS/NUTS/BOLTS/STUDS. BMW of North America, LLC (BMW) is recalling certain model year 2005-2010 R1200GS and R1200RT, 2006-2010 R1200GS Adventure, 2007-2010 R1200R, 2007 R1200S and K1200R Sport, 2005-2007 R1200ST, 2008-2009 HP2 Megamoto, 2006 HP2 Enduro, 2008-2010 HP2 Sport, 2005-2008 K1200S, 2006-2008 K1200R, K1200GT, 2009-2011 K1300S, 2010-2011 K1300R, and 2009-2010 K1300GT motorcycles. In the affected motorcycles, the rear wheel mounting flange may crack if the rear wheel mounting bolts are over tightened. Built 2005-11-28 to 2008-04-04.
13V6170002013-12-12. FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP. BMW of North America, LLC (BMW) is recalling certain model year 2005-2011 model year R-model motorcycles, model year 2005-2012 K-model motorcycles, model year 2010-2011 S 1000 model motorcycles, and model year 2006-2010 HP2 motorcycles. In the affected motorcycles, the fuel pump flange (and the auxiliary fuel pump flange if equipped) could develop cracks and leak fuel. Built 2005-11-28 to 2008-04-04.
10V4880002010-10-08. SUSPENSION:REAR. BMW IS RECALLING CERTAIN MODEL YEAR 2005-2011 MOTORCYCLES. THE BEARINGS COULD BE SUBJECT TO CORROSION. THIS COULD LEAD TO REDUCED MOVEMENT OF THE LINK LEVER. Built 2004-05-01 to 2008-08-31.
10V2760002010-06-18. SERVICE BRAKES, HYDRAULIC. BMW IS RECALLING CERTAIN MODEL YEAR 2007 THROUGH 2009 R 1200 AND K 1200 SERIES MOTORCYCLES MANUFACTURED FROM AUGUST 2006 THROUGH MAY 2009. DUE TO THE CURRENT ROUTING OF THE FRONT BRAKE LINES, IT IS POSSIBLE THAT DURING RIDING, AND THEREFORE ASSOCIATED VIBRATION. THE BRAKE LINES COULD BE UNDER STRAIN. IF THE VIBRATION/STRAIN IS SIGNIFICANT, THE BRAKE LINE COULD SPLIT AND START TO DEVELOP A LEAK.
08V2450002008-06-04. SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC. BMW IS RECALLING 548 MY 2008 K1200 S AND GT MOTORCYCLES. THE FASTENERS USED TO SECURE THE FRONT BRAKE-DISC MAY NOT BE LONG ENOUGH TO ENSURE A SECURE MOUNTING. OVER TIME, THESE FASTENERS COULD LOOSEN. IF THAT HAPPENED, THE BRAKE DISC WOULD NO LONGER BE SECURELY MOUNTED. Built 2008-01-11 to 2008-01-16.
08V2390002008-06-02. ENGINE AND ENGINE COOLING:ENGINE. BMW IS RECALLING 30 MY 2008 K1200 S AND K1200 GT MOTORCYCLES. A SET SCREW MAY NOT HAVE BEEN INSTALLED AT ITS SPECIFIC LOCATION WITHIN THE OIL DUCT. CONSEQUENTLY, AN ADEQUATE SUPPLY OF OIL MAY NOT CIRCULATE WITHIN THE ENGINE. Built 2007-12-11 to 2008-01-09.
Canada: Transport Canada, as of 2026-10-19
20204372020-09-16. Fuel System. Issue: On certain motorcycles, the fuel pump flange could crack. If this happens, fuel could leak while the engine is running. Note: This recall only affects motorcycles that did not have the fuel pump replaced under Transport Canada recall 2013-442. Safety Risk: A fuel leak can create the risk of a fire. Corrective Actions: BMW will notify owners by mail and instruct you to take your motorcycle to a dealer to replace the fuel pump and auxiliary fuel pump (if equipped) with an improved version.
20174282017-09-01. Lights And Instruments. Certain motorcycles with dealer installed accessory turn signals may not comply with the requirements of Canada Motor Vehicle Safety Standard (CVMSS) 108 - Lighting System and Retroreflective Devices. The size of the lens on the accessory turn signals may be too small, and therefore would not meet the requirements of the standard. This could reduce vehicle conspicuity to following and approaching road users, and increase the risk of a crash causing injury and/or property damage. Correction: Dealers will replace the accessory turn signals with factory indicators that meet the requirements of the standard.
20151012015-03-11. Powertrain. On certain motorcycles, the threaded holes on the rear wheel flange could crack if the wheel bolts are tightened beyond the specified torque limit during servicing. Over time, this could allow the bolts to back out of their threaded holes, causing the rear wheel to become loose. This could result in a loss of stability of the motorcycle, and increase the risk of a crash causing injury and/or property damage. Correction: Dealers will replace the aluminum rear wheel flange with a steel flange.
20134422013-12-13. Fuel System. On certain motorcycles, cracks could develop in the fuel pump and/or auxiliary fuel pump flange (if equipped). This would result in fuel leaking when the engine is turned on and the fuel system is pressurized. Leaking fuel, in the presence of an ignition source, could lead to a fire causing injury and/or damage to property. Correction: Dealers will inspect the fuel pump flange(s) and install a reinforcing ring or replace the fuel pump(s), as necessary.
20103952010-11-03. Suspension. On certain motorcycles, due to environmental conditions, the bearings of the link lever attached to the rear strut could be subject to corrosion. This could lead to reduced movement of the link lever. Over time, if the corrosion became significant, restriction of movement of the link lever could occur. This could affect handling of the motorcycle. In an extreme case, this could result in the connecting rod breaking by a bending force, causing the rear wheel to decelerate by contact with the inner fender. This could lead to a crash depending on traffic, road conditions and rider's reactions. Correction: Dealers will replace the rear suspension relay lever.
20102042010-05-19. Brakes. On certain motorcycles, the front brake lines (due to its current routing) may be under strain. The vibrations that occur when the motorcycle is being ridden could cause the brake lines to develop leaks, allowing brake fluid to escape and cause the level of fluid in the reservoir of the front brake system to drop. Brake fluid leakage could result in loss of front braking capability, which could lead to a crash causing property damage, personal injury or death. Correction: Dealers will replace the front brake lines.

A campaign lists a year, a make and a model, and often only some of the vehicles built. A list with nothing on it is not a clearance either. The lookups below check one VIN.

Check one vehicle officially

Contains information licensed under the Open Government Licence – Canada.