WenmarOpen by Wenmar Pro

Service bulletins for the 2024 BMW 740i

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

130 on file from NHTSA, as of 2026-10-19.

By type

By component

Only bulletins with component: Engine are shown. Show all

Bulletins, newest first
B1211262026-09-28. Service bulletin. ENGINE. Potential customer complaints with no fault codes stored / No MIL displayed. 1. “Rough idle after idling for a longer period of time” 2. “Vehicle feels like it is misfiring at idle” The automatic Start/Stop function is deactivated. The vehicle is stopped and the engine runs at idle speed. After prolonged idle operation (approximately 30 to 50 seconds), a slight jolt or slight change in idlespeed may be noticeable. There are no relevant errors in the DME fault code memory. No mixture control error, no misfiring, no error relating to a relevant component of the drive system. Motor vehicles affected: 1. Only MHEVs (mild hybrid electric vehicle) with crankshaft-driven starter generator. 2. Only vehicles with optional equipment 01CE = recuperation system 3. Affected I-levels: I-level 24-07-500 or higher
B1203262026-07-31. Emissions. ENGINE. Due to an implementation error in various OBD diagnostics in the vehicle's control units, in very rare cases itmay happen that stored fault memory codes (DTCs) and the MIL (warning light) are not automaticallydeleted even though the underlying malfunction has already been rectified. This does not comply with the statutory OBD specifications.
B1211252025-11-25. Service bulletin. ENGINE; ELECTRICAL SYSTEM. One or both of the following faults stored in the DME: 034AA5 - Mixture control bank 1, lambda regulation, mixture too lean 034AA8 - Mixture control bank 1, lambda adaptation, mixture too rich And additionally with the faults above, these affected vehicles may have one or more of the followingirregular combustion-related faults also stored: 033812 033813 033814 033815 033816 033817 033818 033819
B1202242025-11-03. Emissions. ENGINE. RSU availability. VOLUNTARY EMISSIONS RECALL 24E-A02: VALVETRONIC
B1106252025-08-13. Service campaign. ENGINE. Due to an assembly error, the oil pump screws may not have been torqued correctly.
B0636252025-07-02. Other. ENGINE. Hydrobearing Return
B1103252025-05-26. Service bulletin. ENGINE. The “Check Engine Oil Level” warning is displayed while driving due to one of the following: Shortly after a detailed measurement has been carried out Shortly after engine oil has been topped up Shortly after an engine oil service has been carried out
B1206242025-02-03. Service campaign. ENGINE. BMW AG has decided on a service campaign for certain vehicles from the G0x, G12 and G20 series. Please have the starter motor checked and, if necessary, replaced in the vehicles concerned (according to the vehicle identification number selection) if possible before vehicle delivery. If vehicles have already been delivered, please have the measure carried out the next time the vehicles enter the workshop. A bolting fault on the long bolt screws can cause the magnets in the starter motor to twist. As a result, the power of the starter motor decreases. As a result, the engine does not start.
B1110242025-01-25. Service campaign. ENGINE. The engine oil pump mounting screws may not have been tightened with the correct torque.
B0683242024-12-03. Other. ENGINE. Wastegate Valve Actuator Return
B1108242024-12-02. Service campaign. ENGINE. Delivery Stop Check PCV System
B1206242024-09-01. Service campaign. ENGINE. Please have the starter motor checked and, if necessary, replaced in the vehicles concerned (according tothe vehicle identification number selection) if possible before vehicle delivery. If vehicles have already been delivered, please have the measure carried out the next time the vehiclesenter the workshop. A bolting fault on the long bolt screws can cause the magnets in the starter motor to twist. As a result, thepower of the starter motor decreases. As a result, the engine does not start.
B1103242024-09-01. Service campaign. ENGINE. Delivery Stop - Oil Pressure Sensor
B1103242024-07-25. Service campaign. ENGINE. DELIVERY STOP: OIL PRESSURE SENSOR
B1202242024-07-02. Service campaign. ENGINE. VOLUNTARY EMISSIONS RECALL 24E-A02: VALVETRONIC
B1204242024-07-01. Service bulletin. ENGINE. Customer perceptions: Vehicles with optional equipment “01CR -Remote Engine Start”. The “Remote Engine Start” selection is missing in the “Pre-conditioning” sub-menu The “Remote Engine Start” can be selected using the vehicle key. However, the “Remote Engine Start” isnot carried out. The Check Control message (number 2055) appears: Remote engine start not available Vehicles with optional equipment “07ME - M Driver’s Package”: The increased maximum speed is not reached Vehicles with optional equipment “01MB - M Drive Professional”: The M MODE “TRACK” is no longer available Only the M MODES “ROAD” and “SPORT” are available Applies to all the customer perceptions: Chance of the error occurring: Very rare, sporadic Both faults listed below are entered in the DME fault memory: 021280 - DME: Certificates (type 1) not ready And 021283 - DME, Secure Feature Activation: Secure Token check still running or unchecked Secure Token present Motor vehicles affected: Vehicles with engine S68T Vehicles with drive unit XB1T
B120224B2024-05-03. Service bulletin. ENGINE AND ENGINE COOLING. BMW AG has issued a Delivery Stop (effective April 12, 2024) on certain Model Year 2023 - 2025 BMW vehicles that were produced between July 21, 2021, and April 11, 2024.
B120224A2024-05-03. Service bulletin. ENGINE AND ENGINE COOLING. BMW AG has issued a Delivery Stop (effective April 12, 2024) on certain Model Year 2023 - 2025 BMW vehicles that were produced between July 21, 2021, and April 11, 2024.
B1202242024-05-03. Service bulletin. ENGINE AND ENGINE COOLING. BMW AG has issued a Delivery Stop (effective April 12, 2024) on certain Model Year 2023 - 2025 BMW vehicles that were produced between July 21, 2021, and April 11, 2024.
B1107232024-03-02. Service bulletin. ENGINE AND ENGINE COOLING. The return springs on the exhaust camshaft followers may break.
B1606232024-01-03. Service bulletin. FUEL SYSTEM, GASOLINE; ENGINE AND ENGINE COOLING. Engine will crank but not start. There is no communication with the integrated fuel module (TFE) whendiagnosing with ISTA. The following two fault codes will be stored in the DME: 032B43 - Low fuel pressure system, electric fuel pump: pressure value too low CDA594 - Message (- 0x33E) missing, receiver DME, transmitter TFE
B1107232023-12-06. Service bulletin. ENGINE AND ENGINE COOLING; ENGINE AND ENGINE COOLING:EXHAUST SYSTEM. The return springs on the exhaust camshaft followers may break.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.