Service bulletins for the 2017 Bentley Continental
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
225 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
Only bulletins with component: Body and frame are shown. Show all
| 2057841/5 | 2026-09-09. Service bulletin. STRUCTURE:BODY; VISIBILITY/WIPER. Windscreen replacement criteria whilst under manufacturers warranty. |
|---|---|
| 2080097/2 | 2026-07-29. Service bulletin. ENGINE; FUEL/PROPULSION SYSTEM; ELECTRICAL SYSTEM; EXTERIOR LIGHTING; STRUCTURE:BODY. Service info: Conversion of imported vehicles. Technical background: Conversion of a vehicle for use in a market other than the one for which it was originally designed or intended is not supported. Enquiries related to conversions or retrofits of vehicles from (or to) other markets (e.g. reimport from USA or UK) are not supported by Technical Support. Vehicles are developed and constructed according to specific market requirements of the respective destination country. As the compatibility of different components (e.g. control units) cannot be defined comprehensively regarding their mutual dependence and interaction in the case of modifications, and in order to prevent danger or risks due to constructional changes, support or advice regarding these modifications cannot be provided. |
| 2075786/3 | 2026-07-29. Service bulletin. STRUCTURE:BODY; SEAT BELTS; AIR BAGS; ELECTRICAL SYSTEM. Airbag, fire, accident (safety-related enquiry - reporting forms) There is a reporting obligation in the following cases: • Airbag/belt released/not released • General accident • Fire and scorching damage for all Bentley Vehicle models - every model year. |
| 2057841/4 | 2026-05-07. Service bulletin. STRUCTURE:BODY; VISIBILITY/WIPER. Windscreen replacement criteria whilst under manufacturers warranty. Customer statement / workshop findings: Windscreen cracked/damaged |
| 2075786/2 | 2025-10-30. Service bulletin. ENGINE; ELECTRICAL SYSTEM; STRUCTURE:BODY; SEAT BELTS; AIR BAGS. Airbag, fire, accident (safety-related enquiry - reporting forms). There is a reporting obligation in the following cases: • Airbag/belt released/not released • General accident • Fire and scorching damage for all Bentley Vehicle models - every model year. |
| 2069806/7 | 2025-10-07. Service bulletin. VISIBILITY/WIPER; ELECTRICAL SYSTEM; STRUCTURE:BODY. HVAC refrigerant leakage suspected or reports of a damp/musty smell within the cabin - Diagnosis guidelines |
| 2077519/2 | 2025-06-06. Service bulletin. STRUCTURE:BODY. Exterior Gap and Profile Information | 17 - 25MY. Condition: Customer and/or retailer may raise an issue with panel gaps/alignment or flushness. |
| 2075786/1 | 2025-06-06. Service bulletin. UNKNOWN OR OTHER; STRUCTURE:BODY; ELECTRICAL SYSTEM; AIR BAGS; SEAT BELTS. Airbag, fire, accident (safety-related enquiry - reporting forms). There is a reporting obligation in the following cases: • Airbag/belt released/not released • General accident • Fire and scorching damage for all Bentley Vehicle models - every model year. |
| 2077519/1 | 2025-06-05. Service bulletin. STRUCTURE:BODY. Exterior Gap and Profile Information | 17 - 25MY. Condition: Customer and/or retailer may raise an issue with panel gaps/alignment or flushness |
| 2076639/2 | 2025-05-07. Service bulletin. STRUCTURE:BODY; ELECTRICAL SYSTEM. Infotainment Upgrade Unit Diagnosis | Continental GT/GTC and Flying Spur. Condition: Failure evident with Bentley Information Upgrade Unit. Technical Background: The attached document is to aid diagnosis for any faults that may be found within the Bentley Infotainment Upgrade Unit. |
| 2056407/6 | 2025-03-08. Service bulletin. STRUCTURE:BODY; SUSPENSION; STEERING. Running gear - Noise identification. Customer statement: Noise complaint from the suspension and/or steering. |
| 2071525/1 | 2024-01-03. Service bulletin. STRUCTURE; ELECTRICAL SYSTEM; LATCHES/LOCKS/LINKAGES. Driver / Passenger door(s) creak on close - All models (frond and/or rear). Customer statement / workshop findings: Driver and / or Passenger door creak during the Power close function - Front and / or rear (Depending on vehicle type) Technical background: Ensure the fault is as described within the Customer statement Workshop findings section before continuing. |
| 2069806/4 | 2023-10-06. Service bulletin. EQUIPMENT; VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM; STRUCTURE. HVAC refrigerant leakage suspected or reports of a damp/musty smell within the cabin - Diagnosis guidelines. Condition HVAC not cooling / HVAC cooling less than expected / HVAC refrigerant leakage confirmed Or The customer reports a damp/musty smell within the cabin. - Should no HVAC leak be evident and a damp/musty smell has been reported/identified the operative should first confirm that water is not leaking into the cabin please refer to all VIN applicable TPIs particularly TPI 2062622/- - Should there be no water leaks evident, the operative should check the HVAC and body drains for blockages, in the event the drains are blocked the drains must be unblocked, once this has been completed the operative should confirm if the damp/musty smell is still evident. |
| 2062622.2 | 2023-02-03. Service bulletin. STRUCTURE. Water Leak/Wind Noise Diagnosis Customer Statement: -Water leak/wind noise evident -The instructions within this TPI should be followed to assist in the diagnosis of water leaks or wind noise. |
| 2066868/1 | 2022-06-03. Service bulletin. STRUCTURE; ELECTRICAL SYSTEM. Convertible hood - Header latch motor assembly kit. Customer statement / workshop findings: The convertible header latch motor is now available separately (Figure 1) Technical background: In the event that the header latch motor is diagnosed as defective For example: The header latch can only be unlocked/locked manually please refer to the Measure section of this TPI. |
| 2053351/7 | 2021-10-06. Service bulletin. ENGINE AND ENGINE COOLING; STRUCTURE. Buzzing noise from engine area. Customer statement / workshop findings Workshop findings: Buzzing noise heard at idle from the sump area when the vehicle is elevated on a workshop ramp. The noise cannot be heard from inside the cabin or outside of the vehicle in normal circumstances. Technical background: A buzzing noise can be generated by the oil pump when the engine is running at idle. Measure: Test a comparable vehicle with the same Engine derivative. If the same noise is apparent on the comparable vehicle and no oil pressure warnings or relevant DTCs are stored then the noise can be considered a characteristic of the vehicle and no further action should be taken. |
| 2057841/3 | 2021-10-06. Service bulletin. VISIBILITY; STRUCTURE. Windscreen replacement criteria whilst under manufacturers warranty Customer statement / workshop findings: Windscreen cracked/damaged Technical background: Please refer to the instructions within the Measure section of this TPI in the event that a windscreen is cracked/damaged NOTE: The instructions MUST be followed to help the retailer clarify if the windscreen should be replaced under manufacturers warranty (Stress crack) or Customer pay/insurance (external influence damage) |
| 2056582/4 | 2021-10-06. Service bulletin. STRUCTURE. Interior trim - Creak and rattle - Noise identification Customer statement: Noise complaint from the interior Workshop findings: The noise can be reproduced and clearly assigned to the interior Prior to starting the instructions within this TPI, the Retailer must check and confirm the vehicle is in standard factory condition and has not had any non-approved aftermarket modifications conducted Should any aftermarket modifications be found, the Retailer must make Product Support aware by raising a DISS query to report the details of the modification, you must then await feedback from Product Support before conducting any further work |
| 2062622/1 | 2021-04-07. Service bulletin. EQUIPMENT; STRUCTURE. Water leak/wind noise diagnosis. Customer statement / workshop findings: Water leak/wind noise evident Technical background: The instructions within the Measure section should be followed to assist in the diagnosis of water leaks or wind noise |
| 2035817/2 | 2021-03-05. Service bulletin. EQUIPMENT; STRUCTURE. Water ingress hood stowage area - high mounted stop lamp. Customer statement / workshop findings: Water leaks into hood stowage area Technical background: Seal failure between the brightware containing the high mounted stop lamp, and the tonneau cover, can lead to water ingress into the hood stowage area. |
| 2059884/1 | 2020-11-07. Service bulletin. LATCHES/LOCKS/LINKAGES; STRUCTURE; ELECTRICAL SYSTEM. Continental Series and Flying Spur - Luggage Compartment Lid - Check and Setting Guide. Customer statement / workshop findings: Luggage Compartment Lid (Boot Lid) has sporadic functionality, fails to latch when closing, bounces back when closing or fails to open or close fully. Technical background: This Technical Product Information (TPI) document has been developed to resolve various boot lid concerns, it provides a series of checks and updates to ensure robust boot lid operation. It is important the TPI is followed exactly to ensure maximum benefit. |
| 2049646/3 | 2020-08-08. Service bulletin. STRUCTURE:BODY; EQUIPMENT; EXTERIOR LIGHTING:BRAKE LIGHTS. Trim Strip For Rear Panel Brake Light Blackware - Paint Adhesion (SC18/05). Technical background: A small number of Rear Panel - Brake Light Trim Strip Assemblies have blackware finishers painted using an incorrect procedure. Remedy: Replace the Rear Panel - Brake Light Trim Strip Assembly |
| 2057841/2 | 2020-08-05. Service bulletin. STRUCTURE. Windscreen replacement criteria whilst under manufacturers warranty. Customer statement / workshop findings: Windscreen cracked/damaged Technical background: Please refer to the instructions within the Measure section of this TPI in the event that a windscreen is cracked/damaged |
| 2056582/3 | 2020-08-05. Service bulletin. STRUCTURE. Interior trim - Creak and rattle - Noise identification. Customer statement / workshop findings: Noise complaint from the interior Workshop findings: The noise can be reproduced and clearly assigned to the interior Prior to starting the instructions within this TPI, the Retailer must check and confirm the vehicle is in standard factory condition and has not had any non-approved aftermarket modifications conducted Should any aftermarket modifications be found, the Retailer must make Product Support aware by raising a DISS query to report the details of the modification, you must then await feedback from Product Support before conducting any further work |
| 2058465/2 | 2020-07-07. Service bulletin. STRUCTURE. Continental GTC - Hood insulation cover checks prior to replacement Customer statement / workshop findings: Should any of the following components require replacing: -Convertible hood insulation pad -Convertible hood outer cover -Convertible hood inner lining Refer to the onward instructions within this TPI Technical background: Please refer to the instructions within the Measure section of this TPI to check/confirm if the insulation pad is damaged prior to replacement IMPORTANT: In the event the insulation pad is found to be at fault please refer to TPI 2058277/1 |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.