Service bulletin 2058465/2
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10177079 |
| Published by NHTSA | 2020-07-07 |
| Manufacturer's number | 2058465/2 |
| Manufacturer's date | 2020-06-23 |
| NHTSA component | STRUCTURE |
NHTSA's summary
Continental GTC - Hood insulation cover checks prior to replacement Customer statement / workshop findings: Should any of the following components require replacing: -Convertible hood insulation pad -Convertible hood outer cover -Convertible hood inner lining Refer to the onward instructions within this TPI Technical background: Please refer to the instructions within the Measure section of this TPI to check/confirm if the insulation pad is damaged prior to replacement IMPORTANT: In the event the insulation pad is found to be at fault please refer to TPI 2058277/1
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Body and frame
| BENTLEY CONTINENTAL GT CABRIO | 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 (the catalog's model; the bulletin names a series or trim of it) |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 2016368 | 2016-07-21. Structure |
|---|
A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.
| 2057841/5 | 2026-09-09. Service bulletin. Windscreen replacement criteria whilst under manufacturers warranty. |
|---|---|
| 2078038/5 | 2026-09-09. Service bulletin. Service info: Paint Damage/Anomalies | All Models |
| 2080375/4 | 2026-08-07. Service bulletin. Window Drop Glass Operation | Continental GT/GTC |19-24MY. Customer statement / workshop findings: • Incorrect operation / function of the front and / or rear window drop glass • Front and / or rear drop glass fails to open / close or attempts to close and re-opens once contact has been made between the glass and applicable seal • DTC for window regulator motor no basic setting B148754 evident within any of the 4 window control modules (diagnostic address 42, 52, BB and BC) for loss of basic settings |
| 2078038/4 | 2026-08-05. Service bulletin. Service info: Paint Damage/Anomalies | All Models |
| 2080680/2 | 2026-08-04. Service bulletin. Organ stop air regulator jammed / broken / electrical value wrong reading. Customer Statement: Airflow from the organ stops (air regulators) is not functioning correctly; vents may be stuck, broken, or showing incorrect operation. |
| 2080814/2 | 2026-08-01. Service bulletin. Service Info: Interior Veneer Replacement. Customer statement / workshop findings: For any interior veneer replacement: raise and obtain approval of a Technical DISS query before ordering. This ensures VIN correct specification and prevents visual mismatch. |
| 2077519/4 | 2026-07-31. Service bulletin. Exterior Gap and Profile Information. Customer statement / workshop findings: Customer and/or retailer may raise an issue with panel gaps/alignment or flushness. |
| 2081721/2 | 2026-07-29. Service bulletin. Vehicle Central Locking – Door Locking / Unlocking Functional Complaints. Customer Statement: The customer reports that the vehicle door locking and/or unlocking does not function correctly. This may include intermittent operation, non-response to remote or interior commands, or inconsistent locking behaviour. |
| 2080097/2 | 2026-07-29. Service bulletin. Service info: Conversion of imported vehicles. Technical background: Conversion of a vehicle for use in a market other than the one for which it was originally designed or intended is not supported. Enquiries related to conversions or retrofits of vehicles from (or to) other markets (e.g. reimport from USA or UK) are not supported by Technical Support. Vehicles are developed and constructed according to specific market requirements of the respective destination country. As the compatibility of different components (e.g. control units) cannot be defined comprehensively regarding their mutual dependence and interaction in the case of modifications, and in order to prevent danger or risks due to constructional changes, support or advice regarding these modifications cannot be provided. |
| 2080795/2 | 2026-07-29. Service bulletin. Service Info: Cleaning and Care Guidance for Dinamica Interior Trim Materials |