Service bulletins for the 2015 Bentley Continental
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
263 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
Only bulletins with component: Body and frame are shown. Show all
| 2075786/3 | 2026-07-29. Service bulletin. STRUCTURE:BODY; SEAT BELTS; AIR BAGS; ELECTRICAL SYSTEM. Airbag, fire, accident (safety-related enquiry - reporting forms) There is a reporting obligation in the following cases: • Airbag/belt released/not released • General accident • Fire and scorching damage for all Bentley Vehicle models - every model year. |
|---|---|
| 2075786/2 | 2025-10-30. Service bulletin. ENGINE; ELECTRICAL SYSTEM; STRUCTURE:BODY; SEAT BELTS; AIR BAGS. Airbag, fire, accident (safety-related enquiry - reporting forms). There is a reporting obligation in the following cases: • Airbag/belt released/not released • General accident • Fire and scorching damage for all Bentley Vehicle models - every model year. |
| 2069806/7 | 2025-10-07. Service bulletin. VISIBILITY/WIPER; ELECTRICAL SYSTEM; STRUCTURE:BODY. HVAC refrigerant leakage suspected or reports of a damp/musty smell within the cabin - Diagnosis guidelines |
| 2075786/1 | 2025-06-06. Service bulletin. UNKNOWN OR OTHER; STRUCTURE:BODY; ELECTRICAL SYSTEM; AIR BAGS; SEAT BELTS. Airbag, fire, accident (safety-related enquiry - reporting forms). There is a reporting obligation in the following cases: • Airbag/belt released/not released • General accident • Fire and scorching damage for all Bentley Vehicle models - every model year. |
| 2076639/2 | 2025-05-07. Service bulletin. STRUCTURE:BODY; ELECTRICAL SYSTEM. Infotainment Upgrade Unit Diagnosis | Continental GT/GTC and Flying Spur. Condition: Failure evident with Bentley Information Upgrade Unit. Technical Background: The attached document is to aid diagnosis for any faults that may be found within the Bentley Infotainment Upgrade Unit. |
| 2056407/6 | 2025-03-08. Service bulletin. STRUCTURE:BODY; SUSPENSION; STEERING. Running gear - Noise identification. Customer statement: Noise complaint from the suspension and/or steering. |
| 2069806/4 | 2023-10-06. Service bulletin. EQUIPMENT; VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM; STRUCTURE. HVAC refrigerant leakage suspected or reports of a damp/musty smell within the cabin - Diagnosis guidelines. Condition HVAC not cooling / HVAC cooling less than expected / HVAC refrigerant leakage confirmed Or The customer reports a damp/musty smell within the cabin. - Should no HVAC leak be evident and a damp/musty smell has been reported/identified the operative should first confirm that water is not leaking into the cabin please refer to all VIN applicable TPIs particularly TPI 2062622/- - Should there be no water leaks evident, the operative should check the HVAC and body drains for blockages, in the event the drains are blocked the drains must be unblocked, once this has been completed the operative should confirm if the damp/musty smell is still evident. |
| 2068646.1 | 2023-01-06. Service bulletin. SEAT BELTS; STRUCTURE. Rattle Rear Cabin Area - Seat Belt Assembly Customer Statement: -Rattle from rear of passenger compartment, rear quarter panel area Technical Background: -Metal to metal contact between the front seat belt mounting plate and the seat belt reel housing can result in a rattle in the rear quarter panel area |
| 2040267/4 | 2022-10-01. Service bulletin. STRUCTURE; SEAT BELTS. Rattle Rear Cabin Area - Seat Belt Assembly Technical Background: Metal to metal contact between the front seat belt mounting plate and the seat belt reel housing can result in a rattle the rear quarter panel area. Service: On receipt of a qualified customer complaint referencing rattle in one or both the rear quarter areas and that rattle can be attributed to the front seat belt mount assembly located in the rear quarter panel then carry out the following procedure. The procedure should be performed on both the right hand and the left hand front seat belt reel / mounting plate assemblies |
| 2066868/1 | 2022-06-03. Service bulletin. STRUCTURE; ELECTRICAL SYSTEM. Convertible hood - Header latch motor assembly kit. Customer statement / workshop findings: The convertible header latch motor is now available separately (Figure 1) Technical background: In the event that the header latch motor is diagnosed as defective For example: The header latch can only be unlocked/locked manually please refer to the Measure section of this TPI. |
| 2040267/3 | 2022-04-08. Service bulletin. SEAT BELTS: REAR/OTHER:BUCKLE ASSEMBLY; STRUCTURE; SEAT BELTS. Rattle rear cabin area - Seat belt assembly. Customer statement / workshop findings: Rattle from rear of passenger compartment, rear quarter panel area Technical background: Metal to metal contact between the front seat belt mounting plate and the seat belt reel housing can result in a rattle in the rear quarter panel area |
| 2040267/2 | 2021-11-06. Service bulletin. STRUCTURE. Rattle Rear Cabin Area - Seat Belt Assembly. Condition: Rattle from rear of passenger compartment, rear quarter panel area Technical Background: Metal to metal contact between the front seat belt mounting plate and the seat belt reel housing can result in a rattle in the rear quarter panel area. Service: On receipt of a qualified customer complaint referencing rattle in one or both the rear quarter areas and that rattle can be attributed to the front seat belt mount assembly located in the rear quarter panel then carry out the following procedure. The procedure should be performed on both the right hand and the left hand front seat belt reel / mounting plate assemblies. |
| 2056582/4 | 2021-10-06. Service bulletin. STRUCTURE. Interior trim - Creak and rattle - Noise identification Customer statement: Noise complaint from the interior Workshop findings: The noise can be reproduced and clearly assigned to the interior Prior to starting the instructions within this TPI, the Retailer must check and confirm the vehicle is in standard factory condition and has not had any non-approved aftermarket modifications conducted Should any aftermarket modifications be found, the Retailer must make Product Support aware by raising a DISS query to report the details of the modification, you must then await feedback from Product Support before conducting any further work |
| 2063027/1 | 2021-05-06. Service bulletin. STRUCTURE; ELECTRICAL SYSTEM; LATCHES/LOCKS/LINKAGES. Powered Boot fails to operate due to faulty motors - Replacement motors unavailable to obtain. Customer statement / workshop findings: Powered Boot fails to operate due to faulty motors, replacement motors are unavailable to obtain Technical background: Refer to the Measure section of this TPI to allow the boot to be used in manual mode |
| 2035817/2 | 2021-03-05. Service bulletin. EQUIPMENT; STRUCTURE. Water ingress hood stowage area - high mounted stop lamp. Customer statement / workshop findings: Water leaks into hood stowage area Technical background: Seal failure between the brightware containing the high mounted stop lamp, and the tonneau cover, can lead to water ingress into the hood stowage area. |
| 2059884/1 | 2020-11-07. Service bulletin. LATCHES/LOCKS/LINKAGES; STRUCTURE; ELECTRICAL SYSTEM. Continental Series and Flying Spur - Luggage Compartment Lid - Check and Setting Guide. Customer statement / workshop findings: Luggage Compartment Lid (Boot Lid) has sporadic functionality, fails to latch when closing, bounces back when closing or fails to open or close fully. Technical background: This Technical Product Information (TPI) document has been developed to resolve various boot lid concerns, it provides a series of checks and updates to ensure robust boot lid operation. It is important the TPI is followed exactly to ensure maximum benefit. |
| 2056582/3 | 2020-08-05. Service bulletin. STRUCTURE. Interior trim - Creak and rattle - Noise identification. Customer statement / workshop findings: Noise complaint from the interior Workshop findings: The noise can be reproduced and clearly assigned to the interior Prior to starting the instructions within this TPI, the Retailer must check and confirm the vehicle is in standard factory condition and has not had any non-approved aftermarket modifications conducted Should any aftermarket modifications be found, the Retailer must make Product Support aware by raising a DISS query to report the details of the modification, you must then await feedback from Product Support before conducting any further work |
| 2040833/1 | 2020-07-28. Service bulletin. ELECTRICAL SYSTEM; STRUCTURE. Boot lid parameter change - software update (SC15/10) Technical background: A change to the power boot lid parameters is required Remedy: Revised parameters have been developed and introduced from VIN SCBFT7ZA6GC050922. These parameters are to be loaded into the boot lid control module using the following process |
| 2040071/1 | 2020-07-28. Service bulletin. STRUCTURE. W12 GT - Rear armrest side panels adrift Customer statement / workshop findings: Rear armrest side trim panel dislodged / Rear armrest hide damage clash with ski hatch Technical background: 1. A discrepancy in material specification affecting the compliance of the retaining parts may result in the armrest side trim becoming partially detached (see Figure 1) 2. A clash issue has also been identified between the ski hatch and the rear armrest side trim that can result in trim damage. A modification to the substrate will avoid this clash. This modification is included in this TPI |
| 2040267/1 | 2020-07-28. Service bulletin. SEAT BELTS; STRUCTURE. Rattle rear cabin area Seat belt assembly Customer statement / workshop findings: Rattle from rear of passenger compartment, rear quarter panel area Technical background: Metal to metal contact between the front seat belt mounting plate and the seat belt reel housing can result in a rattle in the rear quarter panel area Measure: On receipt of a qualified customer complaint referencing rattle in one or both the rear quarter areas and that rattle can be attributed to the front seat belt mount assembly located in the rear quarter panel then carry out the following procedure. The procedure should be performed on both the right hand and the left hand front seat belt reel / mounting plate assemblies. |
| 2039914/1 | 2020-07-28. Service bulletin. LATCHES/LOCKS/LINKAGES; STRUCTURE. 15MY power boot PDI check (SC15/05) Technical background A significant design change has occurred on Continental GT and Continental GT Convertible power boot systems built from 15MY onwards. The striker is now powered whereas previously the latch was powered, and the ECU software for the close-cycle of the boot lid is modified. Due to these fundamental changes a different approach is required in rectifying issues. In a few cases, during manufacturing profile adjustment to the boot lid, the boot lid function may have been compromised The Pre Delivery Inspection (PDI) for 15MY onwards includes a specific function check for the power boot. In the event of a power boot failure to latch event during this specific 15MY PDI check then the rectification detailed for outcome of this campaign should be applied Remedy Check boot lid function and if necessary adjust boot lid striker and report adjustment |
| 2058465/2 | 2020-07-07. Service bulletin. STRUCTURE. Continental GTC - Hood insulation cover checks prior to replacement Customer statement / workshop findings: Should any of the following components require replacing: -Convertible hood insulation pad -Convertible hood outer cover -Convertible hood inner lining Refer to the onward instructions within this TPI Technical background: Please refer to the instructions within the Measure section of this TPI to check/confirm if the insulation pad is damaged prior to replacement IMPORTANT: In the event the insulation pad is found to be at fault please refer to TPI 2058277/1 |
| 2059219/1 | 2020-05-06. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT ADAPTIVE/MOBILITY; STRUCTURE. Speaker distortion/vibration at high volume replacement guidelines (Standard audio systems). Customer statement/workshop findings: Speaker distortion and/or vibration at high volume from the front doors, rear quarters or the rear doors depending on model variant Technical background: Refer to the Measure section of this TPI |
| 2058277/2 | 2020-03-04. Service bulletin. STRUCTURE. Continental GTC - Hood insulation pad tension strap fitting procedure Condition In the event the insulation pad (ARROW - Figure 1) requires replacing, the onward instructions within this TPI must be followed Technical Background The right and left hand tension straps (Figure 2) are no longer fitted at the time of manufacture, the Measure section within this TPI details the procedure which must be followed to fit the tension straps |
| 2058465/1 | 2020-03-04. Service bulletin. STRUCTURE. Continental GTC - Hood insulation cover checks prior to replacement Customer statement / workshop findings: Should any of the following components require replacing: Convertible hood insulation pad Convertible hood outer cover Convertible hood inner lining Refer to the onward instructions within this TPI Technical background: Please refer to the instructions within the Measure section of this TPI to check/confirm if the insulation pad is damaged prior to replacement IMPORTANT: In the event the insulation pad is found to be at fault please refer to TPI 2058277/1 |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.