Service bulletins for the 2007 Bentley Continental
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
147 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
Only bulletins with component: Body and frame are shown. Show all
| 2075786/3 | 2026-07-29. Service bulletin. STRUCTURE:BODY; SEAT BELTS; AIR BAGS; ELECTRICAL SYSTEM. Airbag, fire, accident (safety-related enquiry - reporting forms) There is a reporting obligation in the following cases: • Airbag/belt released/not released • General accident • Fire and scorching damage for all Bentley Vehicle models - every model year. |
|---|---|
| 2075786/2 | 2025-10-30. Service bulletin. ENGINE; ELECTRICAL SYSTEM; STRUCTURE:BODY; SEAT BELTS; AIR BAGS. Airbag, fire, accident (safety-related enquiry - reporting forms). There is a reporting obligation in the following cases: • Airbag/belt released/not released • General accident • Fire and scorching damage for all Bentley Vehicle models - every model year. |
| 2069806/7 | 2025-10-07. Service bulletin. VISIBILITY/WIPER; ELECTRICAL SYSTEM; STRUCTURE:BODY. HVAC refrigerant leakage suspected or reports of a damp/musty smell within the cabin - Diagnosis guidelines |
| 2075786/1 | 2025-06-06. Service bulletin. UNKNOWN OR OTHER; STRUCTURE:BODY; ELECTRICAL SYSTEM; AIR BAGS; SEAT BELTS. Airbag, fire, accident (safety-related enquiry - reporting forms). There is a reporting obligation in the following cases: • Airbag/belt released/not released • General accident • Fire and scorching damage for all Bentley Vehicle models - every model year. |
| 2056407/6 | 2025-03-08. Service bulletin. STRUCTURE:BODY; SUSPENSION; STEERING. Running gear - Noise identification. Customer statement: Noise complaint from the suspension and/or steering. |
| 2033467/2 | 2024-05-07. Service bulletin. EQUIPMENT; VISIBILITY:SUN/MOON ROOF ASSEMBLY; STRUCTURE. Convertible roof - C flap Bowden cable replacement Customer statement / workshop findings: Check convertible roof function. Technical background: Continual improvement in system designs can produce developments that may benefit older vehicles. One such development has been identified in the convertible roof mechanism. Re-route the C flap Bowden cable using a longer cable reduces the friction build up in the system and thus promotes smooth operation of the C flap and longevity in the system. |
| 2043406/3 | 2023-12-07. Service bulletin. EQUIPMENT; STRUCTURE. Hood rear bow clash to tonneau cover - prevention (SC16/21). Technical background: Unable to operate convertible roof due to tonneau cover to rear bow clash. The reinforcement plate inside the roof which assists the smooth operation of the system deforms and catches between the frame and the hood. This clash condition if not prevented could also result in damage. to the hood frame tension straps. |
| 2069806/4 | 2023-10-06. Service bulletin. EQUIPMENT; VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM; STRUCTURE. HVAC refrigerant leakage suspected or reports of a damp/musty smell within the cabin - Diagnosis guidelines. Condition HVAC not cooling / HVAC cooling less than expected / HVAC refrigerant leakage confirmed Or The customer reports a damp/musty smell within the cabin. - Should no HVAC leak be evident and a damp/musty smell has been reported/identified the operative should first confirm that water is not leaking into the cabin please refer to all VIN applicable TPIs particularly TPI 2062622/- - Should there be no water leaks evident, the operative should check the HVAC and body drains for blockages, in the event the drains are blocked the drains must be unblocked, once this has been completed the operative should confirm if the damp/musty smell is still evident. |
| 2066868/1 | 2022-06-03. Service bulletin. STRUCTURE; ELECTRICAL SYSTEM. Convertible hood - Header latch motor assembly kit. Customer statement / workshop findings: The convertible header latch motor is now available separately (Figure 1) Technical background: In the event that the header latch motor is diagnosed as defective For example: The header latch can only be unlocked/locked manually please refer to the Measure section of this TPI. |
| 2056582/4 | 2021-10-06. Service bulletin. STRUCTURE. Interior trim - Creak and rattle - Noise identification Customer statement: Noise complaint from the interior Workshop findings: The noise can be reproduced and clearly assigned to the interior Prior to starting the instructions within this TPI, the Retailer must check and confirm the vehicle is in standard factory condition and has not had any non-approved aftermarket modifications conducted Should any aftermarket modifications be found, the Retailer must make Product Support aware by raising a DISS query to report the details of the modification, you must then await feedback from Product Support before conducting any further work |
| 2063025/1 | 2021-05-06. Service bulletin. ELECTRICAL SYSTEM; STRUCTURE; LATCHES/LOCKS/LINKAGES. Powered Boot fails to operate due to faulty motors - Replacement motors unavailable to obtain Customer statement / workshop findings: Powered boot fails to operate due to faulty motors, replacement motors are unavailable to obtain Technical background: Refer to the Measure section of this TPI to allow the boot to be used in manual mode |
| 2059884/1 | 2020-11-07. Service bulletin. LATCHES/LOCKS/LINKAGES; STRUCTURE; ELECTRICAL SYSTEM. Continental Series and Flying Spur - Luggage Compartment Lid - Check and Setting Guide. Customer statement / workshop findings: Luggage Compartment Lid (Boot Lid) has sporadic functionality, fails to latch when closing, bounces back when closing or fails to open or close fully. Technical background: This Technical Product Information (TPI) document has been developed to resolve various boot lid concerns, it provides a series of checks and updates to ensure robust boot lid operation. It is important the TPI is followed exactly to ensure maximum benefit. |
| 2056582/3 | 2020-08-05. Service bulletin. STRUCTURE. Interior trim - Creak and rattle - Noise identification. Customer statement / workshop findings: Noise complaint from the interior Workshop findings: The noise can be reproduced and clearly assigned to the interior Prior to starting the instructions within this TPI, the Retailer must check and confirm the vehicle is in standard factory condition and has not had any non-approved aftermarket modifications conducted Should any aftermarket modifications be found, the Retailer must make Product Support aware by raising a DISS query to report the details of the modification, you must then await feedback from Product Support before conducting any further work |
| 2058465/2 | 2020-07-07. Service bulletin. STRUCTURE. Continental GTC - Hood insulation cover checks prior to replacement Customer statement / workshop findings: Should any of the following components require replacing: -Convertible hood insulation pad -Convertible hood outer cover -Convertible hood inner lining Refer to the onward instructions within this TPI Technical background: Please refer to the instructions within the Measure section of this TPI to check/confirm if the insulation pad is damaged prior to replacement IMPORTANT: In the event the insulation pad is found to be at fault please refer to TPI 2058277/1 |
| 2058277/2 | 2020-03-04. Service bulletin. STRUCTURE. Continental GTC - Hood insulation pad tension strap fitting procedure Condition In the event the insulation pad (ARROW - Figure 1) requires replacing, the onward instructions within this TPI must be followed Technical Background The right and left hand tension straps (Figure 2) are no longer fitted at the time of manufacture, the Measure section within this TPI details the procedure which must be followed to fit the tension straps |
| 2058465/1 | 2020-03-04. Service bulletin. STRUCTURE. Continental GTC - Hood insulation cover checks prior to replacement Customer statement / workshop findings: Should any of the following components require replacing: Convertible hood insulation pad Convertible hood outer cover Convertible hood inner lining Refer to the onward instructions within this TPI Technical background: Please refer to the instructions within the Measure section of this TPI to check/confirm if the insulation pad is damaged prior to replacement IMPORTANT: In the event the insulation pad is found to be at fault please refer to TPI 2058277/1 |
| 2058277/1 | 2020-02-08. Service bulletin. STRUCTURE. Customer statement / workshop findings In the event the insulation pad (ARROW - Figure 1) requires replacing, the onward instructions within this TPI must be followed. Technical background The right and left hand tension straps (Figure 2) are no longer fitted at the time of manufacture, the Measure section within this TPI details the procedure which must be followed to fit the tension straps. |
| 2056582/2 | 2020-01-09. Service bulletin. STRUCTURE. Condition: Customer statement: Noise complaint from the interior Workshop findings: The noise can be reproduced and clearly assigned to the interior Prior to starting the instructions within this TPI, the Retailer must check and confirm the vehicle is in standard factory condition and has not had any non-approved aftermarket modifications conducted Should any aftermarket modifications be found, the Retailer must make Product Support aware by raising a DISS query to report the details of the modification, you must then await feedback from Product Support before conducting any further work Technical Background It is the retailers responsibility to check and confirm if there are any TPIs which are applicable to the customers complaint/issue if there is an applicable TPI available, apply it and complete a DISS complaint to include Workshop findings only (No repair query required). For correct diagnosis and repair the attached Flowchart must be followed in conjunction with the Measure section of this TPI |
| 20434062 | 2017-08-25. Service bulletin. EQUIPMENT; STRUCTURE:BODY:HOOD. Hood rear bow clash to tonneau cover - prevention (SC16/21) *Revised: VIN Updates |
| 20434061 | 2017-02-09. Service bulletin. STRUCTURE; EQUIPMENT. HOOD REAR BOW CLASH TO TONNEAU COVER – PREVENTION (SC16/21) |
| 20424622 | 2017-02-09. Service bulletin. EQUIPMENT; STRUCTURE. HEADLINER REPLACEMENT - RIGHT HAND C POST HEADLINER GUIDE |
| SB-2033745-2A | 2016-03-16. Service bulletin. STRUCTURE:BODY:TRUNK LID. SUMMARY TO BE PROVIDED ON A FUTURE DATE. |
| SB-2033742-1A | 2016-03-16. Service bulletin. STRUCTURE:BODY:TRUNK LID. SUMMARY TO BE PROVIDED ON A FUTURE DATE. |
| SB-2033745-1A | 2016-03-16. Service bulletin. STRUCTURE:BODY:TRUNK LID; STRUCTURE:BODY; ELECTRICAL SYSTEM. SUMMARY TO BE PROVIDED ON A FUTURE DATE. |
| SB-2033717-1A | 2016-03-16. Service bulletin. STRUCTURE:BODY; STRUCTURE:BODY:DOOR; STRUCTURE:BODY:TRUNK LID. SUMMARY TO BE PROVIDED ON A FUTURE DATE. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.