WenmarOpen by Wenmar Pro

Service bulletins for the 2005 Bentley Continental

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

117 on file from NHTSA, as of 2026-10-19.

By type

By component

Only bulletins with component: Body and frame are shown. Show all

Bulletins, newest first
2075786/32026-07-29. Service bulletin. STRUCTURE:BODY; SEAT BELTS; AIR BAGS; ELECTRICAL SYSTEM. Airbag, fire, accident (safety-related enquiry - reporting forms) There is a reporting obligation in the following cases: • Airbag/belt released/not released • General accident • Fire and scorching damage for all Bentley Vehicle models - every model year.
2075786/22025-10-30. Service bulletin. ENGINE; ELECTRICAL SYSTEM; STRUCTURE:BODY; SEAT BELTS; AIR BAGS. Airbag, fire, accident (safety-related enquiry - reporting forms). There is a reporting obligation in the following cases: • Airbag/belt released/not released • General accident • Fire and scorching damage for all Bentley Vehicle models - every model year.
2069806/72025-10-07. Service bulletin. VISIBILITY/WIPER; ELECTRICAL SYSTEM; STRUCTURE:BODY. HVAC refrigerant leakage suspected or reports of a damp/musty smell within the cabin - Diagnosis guidelines
2075786/12025-06-06. Service bulletin. UNKNOWN OR OTHER; STRUCTURE:BODY; ELECTRICAL SYSTEM; AIR BAGS; SEAT BELTS. Airbag, fire, accident (safety-related enquiry - reporting forms). There is a reporting obligation in the following cases: • Airbag/belt released/not released • General accident • Fire and scorching damage for all Bentley Vehicle models - every model year.
2056407/62025-03-08. Service bulletin. STRUCTURE:BODY; SUSPENSION; STEERING. Running gear - Noise identification. Customer statement: Noise complaint from the suspension and/or steering.
2069806/42023-10-06. Service bulletin. EQUIPMENT; VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM; STRUCTURE. HVAC refrigerant leakage suspected or reports of a damp/musty smell within the cabin - Diagnosis guidelines. Condition HVAC not cooling / HVAC cooling less than expected / HVAC refrigerant leakage confirmed Or The customer reports a damp/musty smell within the cabin. - Should no HVAC leak be evident and a damp/musty smell has been reported/identified the operative should first confirm that water is not leaking into the cabin please refer to all VIN applicable TPIs particularly TPI 2062622/- - Should there be no water leaks evident, the operative should check the HVAC and body drains for blockages, in the event the drains are blocked the drains must be unblocked, once this has been completed the operative should confirm if the damp/musty smell is still evident.
2056582/42021-10-06. Service bulletin. STRUCTURE. Interior trim - Creak and rattle - Noise identification Customer statement: Noise complaint from the interior Workshop findings: The noise can be reproduced and clearly assigned to the interior Prior to starting the instructions within this TPI, the Retailer must check and confirm the vehicle is in standard factory condition and has not had any non-approved aftermarket modifications conducted Should any aftermarket modifications be found, the Retailer must make Product Support aware by raising a DISS query to report the details of the modification, you must then await feedback from Product Support before conducting any further work
2063025/12021-05-06. Service bulletin. ELECTRICAL SYSTEM; STRUCTURE; LATCHES/LOCKS/LINKAGES. Powered Boot fails to operate due to faulty motors - Replacement motors unavailable to obtain Customer statement / workshop findings: Powered boot fails to operate due to faulty motors, replacement motors are unavailable to obtain Technical background: Refer to the Measure section of this TPI to allow the boot to be used in manual mode
2059884/12020-11-07. Service bulletin. LATCHES/LOCKS/LINKAGES; STRUCTURE; ELECTRICAL SYSTEM. Continental Series and Flying Spur - Luggage Compartment Lid - Check and Setting Guide. Customer statement / workshop findings: Luggage Compartment Lid (Boot Lid) has sporadic functionality, fails to latch when closing, bounces back when closing or fails to open or close fully. Technical background: This Technical Product Information (TPI) document has been developed to resolve various boot lid concerns, it provides a series of checks and updates to ensure robust boot lid operation. It is important the TPI is followed exactly to ensure maximum benefit.
2056582/32020-08-05. Service bulletin. STRUCTURE. Interior trim - Creak and rattle - Noise identification. Customer statement / workshop findings: Noise complaint from the interior Workshop findings: The noise can be reproduced and clearly assigned to the interior Prior to starting the instructions within this TPI, the Retailer must check and confirm the vehicle is in standard factory condition and has not had any non-approved aftermarket modifications conducted Should any aftermarket modifications be found, the Retailer must make Product Support aware by raising a DISS query to report the details of the modification, you must then await feedback from Product Support before conducting any further work
2056582/22020-01-09. Service bulletin. STRUCTURE. Condition: Customer statement: Noise complaint from the interior Workshop findings: The noise can be reproduced and clearly assigned to the interior Prior to starting the instructions within this TPI, the Retailer must check and confirm the vehicle is in standard factory condition and has not had any non-approved aftermarket modifications conducted Should any aftermarket modifications be found, the Retailer must make Product Support aware by raising a DISS query to report the details of the modification, you must then await feedback from Product Support before conducting any further work Technical Background It is the retailers responsibility to check and confirm if there are any TPIs which are applicable to the customers complaint/issue if there is an applicable TPI available, apply it and complete a DISS complaint to include Workshop findings only (No repair query required). For correct diagnosis and repair the attached Flowchart must be followed in conjunction with the Measure section of this TPI
SB-2033745-2A2016-03-16. Service bulletin. STRUCTURE:BODY:TRUNK LID. SUMMARY TO BE PROVIDED ON A FUTURE DATE.
SB-2033742-1A2016-03-16. Service bulletin. STRUCTURE:BODY:TRUNK LID. SUMMARY TO BE PROVIDED ON A FUTURE DATE.
SB-2033745-1A2016-03-16. Service bulletin. STRUCTURE:BODY:TRUNK LID; STRUCTURE:BODY; ELECTRICAL SYSTEM. SUMMARY TO BE PROVIDED ON A FUTURE DATE.
SB-2033717-1A2016-03-16. Service bulletin. STRUCTURE:BODY; STRUCTURE:BODY:DOOR; STRUCTURE:BODY:TRUNK LID. SUMMARY TO BE PROVIDED ON A FUTURE DATE.
TSB-09-0692009-10-07. Service bulletin. ELECTRICAL SYSTEM:WIRING:FRONT UNDERHOOD; STRUCTURE:BODY:HOOD. BENTLEY: AN EXCESS OF TEFLON GREASE APPLIED TO THE COPPER BASED ELECTRODES INSIDE THE HOOD POTENTIOMETER ASSEMBLY CAN ACCUMULATE TO THE EXTENT OF CREATING AN INSULATION FILM. THIS WILL PREVENT OPERATION OF THE HOOD AND STORE A FAULT CODE ON CERTAIN VEHICLES. NO MODEL YEARS LISTED. *PE
08-0822008-09-07. Service bulletin. STRUCTURE:BODY:HOOD:HINGE AND ATTACHMENTS; STRUCTURE:BODY:HOOD. BENTLEY: CONTINENTAL GTC - HOOD POTENTIOMETER. CONTINENTAL GTC - HOOD POTENTIOMETER BECOMES DETACHED - SECONDARY RETENTION - SC08/04. *PE

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.