Service bulletins for the 2022 Bentley Bentayga
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
636 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
Only bulletins with component: Seat belts are shown. Show all
| 2075786/3 | 2026-07-29. Service bulletin. STRUCTURE:BODY; SEAT BELTS; AIR BAGS; ELECTRICAL SYSTEM. Airbag, fire, accident (safety-related enquiry - reporting forms) There is a reporting obligation in the following cases: • Airbag/belt released/not released • General accident • Fire and scorching damage for all Bentley Vehicle models - every model year. |
|---|---|
| 2075786/2 | 2025-10-30. Service bulletin. ENGINE; ELECTRICAL SYSTEM; STRUCTURE:BODY; SEAT BELTS; AIR BAGS. Airbag, fire, accident (safety-related enquiry - reporting forms). There is a reporting obligation in the following cases: • Airbag/belt released/not released • General accident • Fire and scorching damage for all Bentley Vehicle models - every model year. |
| 2075786/1 | 2025-06-06. Service bulletin. UNKNOWN OR OTHER; STRUCTURE:BODY; ELECTRICAL SYSTEM; AIR BAGS; SEAT BELTS. Airbag, fire, accident (safety-related enquiry - reporting forms). There is a reporting obligation in the following cases: • Airbag/belt released/not released • General accident • Fire and scorching damage for all Bentley Vehicle models - every model year. |
| 2071047/4 | 2024-04-06. Service bulletin. AIR BAGS; ELECTRICAL SYSTEM; SEAT BELTS. DTC B101C29 and/or DTC B101D29 evident within the airbag control unit (J234). Customer statement / workshop findings: One or a combination of the following DTCs are evident within the airbag control unit (J234) B101C29: Driver seat belt switch implausible signal And/or B101D29: Front passenger side safety belt switch implausible signal Technical background: In the event the issue is as described the operative should refer to the Measure section of this TPI. |
| 2071047/3 | 2023-12-06. Service bulletin. ELECTRICAL SYSTEM; AIR BAGS; SEAT BELTS. DTC B101C29 and/or DTC B101D29 evident within the airbag control unit (J234). Customer statement / workshop findings: One or a combination of the following DTCs are evident within the airbag control unit (J234) B101C29: Driver seat belt switch implausible signal And/or B101D29: Front passenger side safety belt switch implausible signal Technical background: Refer to the Measure section of this TPI ensuring all steps are followed to completion depending on the side in which the issue is evident (driver and/or passenger). |
| 2070998/1 | 2023-08-03. Service bulletin. SEAT BELTS; ELECTRICAL SYSTEM. Rear seatbelt - Incorrect buckle status within the DIP - Bentayga Series. Customer statement: Incorrect rear seatbelt buckle status shown within the DIP Workshop findings: Although there is no occupant evident within the rear seats (2nd row) the rear seat is shown as occupied (Figure 1). Technical background: There is no specific DTC evident for the scenario described. The issue described is evident as the rear seat belt buckles are not resistor coded The system uses a non-resistor coded buckle strategy (zero-infinity or open-closed buckle) for the rear seats. In correct operation, a fastened seatbelt is open circuit and an un-fastened seatbelt is closed circuit If harness damage is present or an electrical connector joint is not properly engaged, an unintended open circuit occurs. This will give an incorrect buckle status reading within the DIP The advice within this TPI should be referred to first before conducting any further diagnosis or disassembly of the vehicles interior Previous assembly/disassembly may have caused an unintentional open circuit when operatives have been working on or around the rear seat belt assemblies |
| 2071047/1 | 2023-08-03. Service bulletin. SEAT BELTS; AIR BAGS; ELECTRICAL SYSTEM. DTC B101C29 and/or DTC B101D29 evident within the airbag control unit (J234). Customer statement / workshop findings: One or a combination of the following DTCs is evident within the airbag control unit (J234) B101C29: Driver seat belt switch implausible signal And/or B101D29: Front passenger side safety belt switch implausible signal Technical background: Refer to the Measure section of this TPI Measure: In the event that one or both DTCs are evident the operative must conduct the following: - Raise a technical DISS query - Ensure a current ODIS log is attached to the technical DISS query - Await feedback from Product support before conducting any further work or diagnosis |
| 2058411/4 | 2021-11-06. Service bulletin. SEAT BELTS. Seat belt buckle stop button - Missing, Condition: Seat belt buckle stop button missing Technical Background: The seat belt buckle stop button should be evident as shown in Figure 1. Should the seatbelt be as shown in Figure 2 (Buckle stop button missing OR broken/loose) - Refer to the Measure section of this TPI |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.