Service bulletins for the 2019 Bentley Bentayga
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
629 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
Only bulletins with component: Body and frame are shown. Show all
| 2069806/4 | 2023-10-06. Service bulletin. EQUIPMENT; VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM; STRUCTURE. HVAC refrigerant leakage suspected or reports of a damp/musty smell within the cabin - Diagnosis guidelines. Condition HVAC not cooling / HVAC cooling less than expected / HVAC refrigerant leakage confirmed Or The customer reports a damp/musty smell within the cabin. - Should no HVAC leak be evident and a damp/musty smell has been reported/identified the operative should first confirm that water is not leaking into the cabin please refer to all VIN applicable TPIs particularly TPI 2062622/- - Should there be no water leaks evident, the operative should check the HVAC and body drains for blockages, in the event the drains are blocked the drains must be unblocked, once this has been completed the operative should confirm if the damp/musty smell is still evident. |
|---|---|
| 2062622.2 | 2023-02-03. Service bulletin. STRUCTURE. Water Leak/Wind Noise Diagnosis Customer Statement: -Water leak/wind noise evident -The instructions within this TPI should be followed to assist in the diagnosis of water leaks or wind noise. |
| 2055540.3 | 2022-12-08. Service bulletin. STEERING; STRUCTURE. Rumble noise and/or floor pan/steering column vibration Customer Statement: -Floor pan or steering column/steering wheel vibration when maneuvering/steering at slow speeds with steering wheel input |
| 2065197.2 | 2022-12-08. Service bulletin. STRUCTURE; SUSPENSION. Squeaking/creaking noises from the front axle and/or leaks at the lower ball joint/s Customer Statement: -A leak is visible at the boot of the lower ball joint (grease emerging) however the boot does not show any damage |
| 2067489/1 | 2022-10-07. Service bulletin. STRUCTURE; VISIBILITY. Window side glass - Identification - Standard (STD) or Privacy (PRV) Customer Statement: - Incorrect side glass fitted - Standard (STD) not Privacy (PRV) or visa versa and/or Defects are evident within the glass Technical Background: -The instructions within the Measure section MUST only be followed if the glass is to be replaced |
| 2067488/1 | 2022-08-05. Service bulletin. STRUCTURE. Veneer/trim mismatch - DISS query requirements. Customer statement / workshop findings: In the event that a trim mismatch is detected for example: - Piano black veneer is supplied although the customer ordered walnut veneer Or - The interior trim colour is incorrect for example: Cricket ball interior trim is supplied although the customer ordered Hotspur The operative should refer to the Technical background section |
| 2057988/6 | 2022-01-08. Service bulletin. EQUIPMENT; STRUCTURE. Bentayga Hybrid - Accessory Embargo. Customer statement / workshop findings Customer request to install fixed sill steps, deploying sill steps or Illuminated tread plates to Bentayga Hybrid vehicle. Technical background Due to the routing and proximity of high voltage cables it is strictly prohibited to install the following accessories on Bentayga Hybrid vehicles. - Fixed sill steps. - Deploying sill steps. - Illuminated tread plates NOTE: Tow bars cannot be fitted to Bentayga Hybrid vehicles due to certification IMPORTANT: Bentayga Styling Specification MUST NOT be fitted to Bentayga Hybrid vehicles from 19 to 20 Model year due to certification reasons However From 21 Model year onwards the Bentayga Styling specification can be fitted Note: Failure to observe these instructions may invalidate certain aspects of the vehicle warranty. In all instances, when placing an order for spare parts or accessories please refer to the electronic parts catalogue (ETKA) |
| 2065567/1 | 2022-01-07. Service bulletin. STRUCTURE. Front wing Flying B detached, loose and/or rattling noise from the front wing(s). Customer statement / workshop findings The front wing Flying B is loose/rattling Or The front wing Flying B is detached from the front wing. Measure In the event the front wing Flying B brightware is loose/rattling carry out the onward instructions from step 1 However In the event the front wing Flying B brightware is detached (not damaged) carry out the instructions from step 2 HINT: The front wing does not require removal to conduct this procedure 1) Referring to Rep.Gr 66 - Remove the front wing 'Flying B' 2) Using a suitable cleaning agent for example 3M surface cleaner and suitable cloth, thoroughly clean the brightware aperture and the front wing 'Flying B' 3) Using the adhesive as per the Parts information section - Apply the adhesive in the three locations shown in Figure 3 |
| 2064779/1 | 2021-11-05. Service bulletin. SUSPENSION; STRUCTURE. Customer statement: Creaking/squeak noise from the front suspension. Workshop findings: Defective upper inner lever bush. Technical background Verify that the customer complaint matches the sound file within the Bentley Hub Reference TPI Transaction number 2064779/-. The noise present in the sound file is caused by defective upper inner lever bush/bushes, the noise can appear in the following possible scenario. -When the vehicle is moved with steering input over uneven surfaces (for e.g. a ramp or speed bump). If the customer complaint occurs in any of the above circumstances and the noise can be clearly assigned to the noise within the sound file Refer to the instructions within the Measure section of this TPI. VERY IMPORTANT NOTE FOR HYBRID VEHICLES: -Hybrid vehicles use a High voltage system and MUST only be worked on by suitably qualified personnel. -Please ensure all guidelines within the repair manual are strictly followed before and whilst conducting any work on vehicles with a High voltage system |
| 2064469/1 | 2021-10-07. Service bulletin. STRUCTURE; ELECTRICAL SYSTEM. Bentayga - Rear Window Blinds Do Not Fully Retract. Customer statement / workshop findings: Rear window blind/s do not fully retract (Jammed) |
| 2053351/7 | 2021-10-06. Service bulletin. ENGINE AND ENGINE COOLING; STRUCTURE. Buzzing noise from engine area. Customer statement / workshop findings Workshop findings: Buzzing noise heard at idle from the sump area when the vehicle is elevated on a workshop ramp. The noise cannot be heard from inside the cabin or outside of the vehicle in normal circumstances. Technical background: A buzzing noise can be generated by the oil pump when the engine is running at idle. Measure: Test a comparable vehicle with the same Engine derivative. If the same noise is apparent on the comparable vehicle and no oil pressure warnings or relevant DTCs are stored then the noise can be considered a characteristic of the vehicle and no further action should be taken. |
| 2057841/3 | 2021-10-06. Service bulletin. VISIBILITY; STRUCTURE. Windscreen replacement criteria whilst under manufacturers warranty Customer statement / workshop findings: Windscreen cracked/damaged Technical background: Please refer to the instructions within the Measure section of this TPI in the event that a windscreen is cracked/damaged NOTE: The instructions MUST be followed to help the retailer clarify if the windscreen should be replaced under manufacturers warranty (Stress crack) or Customer pay/insurance (external influence damage) |
| 2056582/4 | 2021-10-06. Service bulletin. STRUCTURE. Interior trim - Creak and rattle - Noise identification Customer statement: Noise complaint from the interior Workshop findings: The noise can be reproduced and clearly assigned to the interior Prior to starting the instructions within this TPI, the Retailer must check and confirm the vehicle is in standard factory condition and has not had any non-approved aftermarket modifications conducted Should any aftermarket modifications be found, the Retailer must make Product Support aware by raising a DISS query to report the details of the modification, you must then await feedback from Product Support before conducting any further work |
| 2064093/1 | 2021-08-07. Service bulletin. ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING; STRUCTURE. Loss of the EV Mode Active Pedal Detent Feature. Customer statement / workshop findings Loss of the EV Mode Active Pedal Detent feature on the vehicle. No force can be felt by driver when passing through the EV Mode threshold during the trajectory travel of the accelerator pedal TIP: Please also refer to the Owners handbook regarding accelerator pedal feedback response before commencing with the instructions within the Measure section. Technical background Software update for 0697 - Active accelerator pedal is available (slave Control unit of 0001 - ECM1) |
| 2052394/13 | 2021-08-06. Service bulletin. LATCHES/LOCKS/LINKAGES; STRUCTURE. Customer statement / workshop findings Driver or Passenger door creak during the Close function Technical background: Refer to the vehicle repair history to check and confirm any previous work done regarding door latch replacement noting the following: - Only replace the door latch which is exhibiting the symptom |
| 2052394/12 | 2021-08-06. Service bulletin. STRUCTURE; LATCHES/LOCKS/LINKAGES. Driver/Passenger door latch creak on close. Customer statement / workshop findings Driver or Passenger door creak during the Close function Technical background: Refer to the vehicle repair history to check and confirm any previous work done regarding door latch replacement noting the following: - Only replace the door latch which is exhibiting the symptom |
| 2063240/1 | 2021-06-04. Service bulletin. STRUCTURE. Creaking noise from the rear seats (5 and 7 seat variants only). Customer statement / workshop findings: Noise/Creak from the rear seat/s at speeds up to 70 mph And/or Creaking from rear seat/s between 0-20 mph during gentle acceleration and braking Technical background: This TPI applies to all 5 and 7 seat variants This TPI does not apply to 4 seat variants Noises and creaks originating from the rear seat/s as a result of seat location pegs and mega bracket interference while driving at speeds up to 70 mph and gentle acceleration and braking between 0-20 mph should be resolved by following the instructions within the Measure section. |
| 2060458/2 | 2021-04-08. Service bulletin. ELECTRICAL SYSTEM; STRUCTURE; EQUIPMENT. Water ingress onto the front reading light. Customer statement / workshop findings: Water drips from the front interior light. The water drips directly from the electric drive of the front sun roof motor. Technical background: A water drop can get onto the guide rail instead of the water flow area of the guide rail. The water runs forwards to the guide tube of the operating cable and from there onto the electric drive. |
| 2044536/9 | 2021-04-07. Service bulletin. EQUIPMENT; STRUCTURE; ELECTRICAL SYSTEM. Bentayga deployable sill step malfunction. Customer statement / workshop findings: Deployable sill step accessory malfunctions. Technical background: This TPI is specifically written to record key information, reach a logical diagnosis and ultimately a problem resolution when presented with a deployable sill step malfunction. Please report via DISS all findings during your investigation and rectification process. |
| 2062622/1 | 2021-04-07. Service bulletin. EQUIPMENT; STRUCTURE. Water leak/wind noise diagnosis. Customer statement / workshop findings: Water leak/wind noise evident Technical background: The instructions within the Measure section should be followed to assist in the diagnosis of water leaks or wind noise |
| 2057988/5 | 2021-03-04. Service bulletin. STRUCTURE; ELECTRICAL SYSTEM. Bentayga Hybrid - Accessory Embargo. Customer statement / workshop findings: Customer request to install fixed sill steps, deploying sill steps or Illuminated tread plates to Bentayga Hybrid vehicle. Technical background: Due to the routing and proximity of high voltage cables it is strictly prohibited to install the following accessories on Bentayga Hybrid vehicles. - Fixed sill steps. - Deploying sill steps. - Illuminated tread plates NOTE: Tow bars cannot be fitted to Bentayga Hybrid vehicles due to certification |
| 2062338/1 | 2021-03-04. Service bulletin. STRUCTURE; EQUIPMENT. Bentayga front door trim - Alignment pin. Customer statement / workshop findings: The alignment pin used to locate the front door trim panel is broken (Figure 1). Measure: The front alignment pin is required to aid alignment of the door trim panel to the door panel during the Manufacturing process NOTE: In Service the alignment pin is not required NOTE: Replacement parts are not needed and are not available to order Referring to Figure 1 – Remove and discard the following: - Broken alignment pin x1 ( If evident) - Fixings x3 - Alignment pin plate x1 TIP: Cover the area in which the plate was previously fixed using anti creak tape If the condition is as shown in Figure 2 - The removal of the alignment pin/plate and fixings is not required unless broken. |
| 2057988/4 | 2021-02-03. Service bulletin. ELECTRICAL SYSTEM; STRUCTURE. Bentayga Hybrid - Accessory Embargo. Customer statement / workshop findings Customer request to install fixed sill steps, deploying sill steps or Illuminated tread plates to Bentayga Hybrid vehicle. Technical background Due to the routing and proximity of high voltage cables it is strictly prohibited to install the following accessories on Bentayga Hybrid vehicles. -Fixed sill steps. -Deploying sill steps. -Illuminated tread plates NOTE: Tow bars cannot be fitted to Bentayga Hybrid vehicles due to certification IMPORTANT: Bentayga Styling Specification MUST NOT be fitted to Bentayga Hybrid vehicles from 19 to 20 Model year due to certification reasons However From 21 Model year onwards the Bentayga Styling specification can be fitted Note: Failure to observe these instructions may invalidate certain aspects of the vehicle warranty |
| 2052394/11 | 2021-01-08. Service bulletin. ELECTRICAL SYSTEM; LATCHES/LOCKS/LINKAGES; STRUCTURE:BODY:DOOR. Driver/Passenger door power latch creak on close. Customer statement / workshop findings: Driver or Passenger door creak during the power latch Close function Technical background: Refer to the Measure section of this TPI Measure: Ensure the fault is as described within the Customer statement, refer to the video on the Bentley Hub referencing TPI 2052394/- |
| 2054210/3 | 2020-08-07. Service bulletin. STRUCTURE:BODY:ROOF AND PILLARS; EQUIPMENT:MECHANICAL; EQUIPMENT. Noises from Panoramic sun roof. Customer statement / workshop findings: Noises from the Panoramic sun roof when driving. The noises occur mainly when the sun roof is closed. Technical background: Mechanical system of sun roof frame not or insufficiently lubricated. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.