WenmarOpen by Wenmar Pro

Service bulletins for the 2014 Audi Q7

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

1122 on file from NHTSA, as of 2026-10-19.

About P0456 on the 2014 Audi Q7: what the code means, and the bulletins and recalls about the same components.

By type

By component

By trouble code

By topic

Only bulletins with trouble code: P0456 are shown. Show all

Bulletins, newest first
A011465 2035519-2017-12-14. Service bulletin. ENGINE. Supersedes Technical Service Bulletin Group 01 number 14-58 dated January 14, 2014. The MIL is on. DTCs are stored in the ECM. Drivability is not affected. The leak detection pump (LDP) is a vacuum-driven, ECM-controlled, diaphragm pump. In order for the LDP to operate, the engine must be running and vacuum must be applied to the vacuum switch on the LDP. The LDP pressurizes the EVAP system and monitors any pressure drop within a specified amount of time in order to detect a leak. DTC P0456 or DTC P0442 can be stored due to static or sporadic air leaks in the EVAP system or static or sporadic air leaks in the LDP.
A011458 2035519-2017-11-08. Service bulletin. ENGINE; ELECTRICAL SYSTEM. Supersedes Technical Service Bulletin Group 01 number 13-40 dated November 4, 2013. The MIL is on. DTCs are stored in the ECM. Drivability is not affected. The leak detection pump (LDP) is a vacuum-driven, ECM-controlled, diaphragm pump. In order for the LDP to operate, the engine must be running and vacuum must be applied to the vacuum switch on the LDP. The LDP pressurizes the EVAP system and monitors any pressure drop within a specified amount of time in order to detect a leak. DTC P0456 or DTC P0442 can be stored due to either Static or sporadic air leaks in the EVAP system or Static or sporadic air leaks in the LDP.
A011340 2035519-2017-10-31. Service bulletin. ENGINE. Supersedes Technical Service Bulletin Group 01 number 13-38 dated October 23, 2013. MIL on. DTCs are stored in the engine control module (ECM). Drivability is not affected. The leak detection pump (LDP) is a vacuum-driven, ECM-controlled, diaphragm pump. In order for the LDP to operate, the engine must be running and vacuum must be applied to the vacuum switch on the LDP. The LDP pressurizes the EVAP system and monitors any pressure drop within a specified amount of time in order to detect a leak. DTC P0456 or DTC P0442 can be stored due to static or sporadic air leaks in the EVAP system or static or sporadic air leaks in the LDP.
A011651 2040924-2017-10-04. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. MIL is on due to DTC P0456 (EVAP Emission Contr. Sys. (very small leak) Leak Detected) being stored in the engine control module (ECM), J623 (address word 01). Drivability is not affected.
A011659204092422017-03-01. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL. THIS TECHNICAL SERVICE BULLETIN EXPLAINS HOW TO PERFORM AN EVAP SYSTEM PRESSURE TEST TO DIAGNOSE DTC P0456.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.