WenmarOpen by Wenmar Pro

Service bulletins for the 2011 Audi Q7

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

1054 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Transmission control module are shown. Show all

Bulletins, newest first
371421203682612022-11-21. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE:SOFTWARE; UNKNOWN OR OTHER; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRICAL SYSTEM:WIRING. Gearbox warning light on.
371398202575432022-11-21. Service bulletin. UNKNOWN OR OTHER; ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM):SOFTWARE; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE:SOFTWARE. Shift quality and operational concerns
37 14 21 20368262022-05-02. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); UNKNOWN OR OTHER. Diagnostic threshold setting in current software is too sensitive. The following message appears in the information display: ?Gearbox malfunction: You can continue driving.? New software in the TCM addresses the condition.
37 13 98 20257542022-05-02. Service bulletin. ELECTRICAL SYSTEM:PROPULSION SYSTEM:TRACTION MOTOR; UNKNOWN OR OTHER; POWER TRAIN; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). The vehicle pulls away with a jerk and slightly increased engine speed. There are no fault entries in the transmission control module. The vehicle hardly tends to creep in driving mode D and R. When pulling away, a jerk can be felt. The gear changes are uncomfortable.Shifting concerns while cruising or kick down. Shuddering or jerking when in R. Harsh gear engagement. Improved software of the transmission control module.
A371392 2030370-2017-11-17. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). Supersedes Technical Service Bulletin Group 37 number 12-60 dated August 6, 2012. Customer complains that the transmission malfunction warning appears in the cluster. Customer is unable to select gear. GFF scan of the vehicle finds fault P070600 (driving position sensor - implausible signal) logged in the transmission control module (diagnosis address 02). The test plan points to the F125 multi-function switch as the cause. Corrosion on the pins of the multi-function switch and its counterpart can lead to implausible signals.
A971442 2036764-2017-11-08. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRICAL SYSTEM. Supersedes Technical Service Bulletin Group 97 number 14-41 dated March 18, 2014. The MIL is on. Vehicle will not start. DTC P068A00 is stored in the engine control module (ECM), J623 (address word 01). Numerous unrelated DTCs are also stored in the system, including: P056200, P057100, P068700, P068A00, P162400, P190C00, U010000, U010100, U012100, U014600, U015500, U021200, U101100, U102600, U111100, U111300, U140000, VAG00003, VAG00185, VAG00263, VAG00317, VAG00384, VAG00446, VAG00456, VAG00457, VAG00466, VAG00473, VAG00532, VAG00565, VAG00591, VAG00714, VAG00819, VAG00955, VAG01217, VAG01299, VAG01314, VAG01315, VAG01317, VAG01320, VAG01330, VAG01331, VAG01332, VAG01334, VAG01333, VAG01336, VAG01705, VAG01964, VAG02067, VAG02072, VAG02095, VAG02103, VAG02203, VAG02214, VAG02635, VAG02812, VAG02874, VAG03041, VAG03157, VAG03166, VAG03220, VAG03278, and/or VAG03531. The motronic engine control module power supply relay, J271, is not functioning properly. Because the J271 relay controls battery voltage (Terminal 30) via a ground signal sent from the ECM, numerous faults can occur in multiple control modules when it is not functioning properly.
A371421 2036826-2017-11-08. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). "Gearbox malfunction: You can continue driving" appears in the information display. DTCs are stored in the transmission control module (TCM), J217 (address word 02). Diagnostic threshold setting in current software is too sensitive.
A011512 2024344-2017-10-21. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ENGINE AND ENGINE COOLING. Supersedes Technical Service Bulletin Group 01 number 13-80 dated March 25, 2013. The MIL is on. Vehicle has reduced performance (in "limp mode"). Various entries may be logged in the engine control module (ECM).
A011511 2039899-2017-10-21. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). The MIL is on due to DTCs P0491 and P0492 being stored in the ECM.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.