WenmarOpen by Wenmar Pro

Over-the-air update PCM-25.10.0 Ranger

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeOver-the-air update
NHTSA id11023710
Published by NHTSA2025-10-03
Manufacturer's numberPCM-25.10.0 Ranger
Manufacturer's date2025-09-02
Campaign id or software versionPCM-25.10.0
NHTSA componentENGINE

NHTSA's summary

Quality improvements include: -On-Board Diagnostics calibration for an enhanced Intake air temperature sensor performance

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Engine

Vehicles listed
FORD RANGER2025

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
20262582026-05-27. Engine
26V3430002026-05-27. ENGINE AND ENGINE COOLING:ENGINE:HARD PARTS INTERNAL/MECHANICAL
20260942026-03-03. Engine
26V1220002026-03-03. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:GAS RECIRCULATION VALVE (EGR VALVE)

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
SSM 552282026-10-12. Service bulletin. Some 2020-2026 Aviator/Explorer/F-150/Bronco/Ranger vehicles equipped with a 2.7L or 3.0L (non-diesel) engine may need the front engine cover removed and reinstalled for various reasons. The Workshop Manual (WSM), Section 303-01 Engine > Removal and Installation > Engine Front Cover service procedure has been updated to include a new essential special service tool (ESST) guide pin alignment tool (303-1790) that is used to align the engine front cover to the engine block, preventing the O-ring seal on the engine oil galley feed tube from getting damaged during installation.
TSB 26-23722026-08-21. Service bulletin. This bulletin supersedes 26-2301. Reason for update: to update the Pinpoint Tests referenced in Step 1. Some of the vehicles listed in the Model statement above may require the replacement of the ambient air temperature sensor for various concerns. DTCs P0071, P0072, and/or P0073 may be present in the powertrain control module (PCM).
TSB 26-22692026-07-13. Service bulletin. Some of the vehicles listed in the Model statement above may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P0300 and/or P0316 stored in the powertrain control module (PCM) (with no other relevant DTCs present) during a cold start after a 3 to 8 hours cold soak. This may be due to the machining surface of the intake ports in the cylinder head.
SSM 545932026-02-27. Service bulletin. Some 2024-2025 F-150, Expedition/Navigator, Escape/Corsair, Bronco, Explorer, Mustang, Maverick vehicles equipped with a 1.5/2.0/2.3/3.5L EcoBoost engine and built on 01-Oct-2024 and through 31-May-2025 may exhibit an extended crank condition, strong fuel smell in the engine oil, high engine oil level and/or may have various drivability diagnostic trouble codes (DTCs) stored in the powertrain control module (PCM) with an illuminated malfunction indicator lamp (MIL). This may be due to an internal fuel leak of the high-pressure fuel pump causing fuel to enter the crankcase and reduce fuel pressure in the direct injection fuel rail. Diagnose this condition using Pinpoint Test HP located in Workshop Manual (WSM), Section 303-04. If no DTCs are stored in the PCM, proceed from Step HP1 to Step HP5 and continue testing. Repair as necessary outside of this article. For claiming, if high-pressure fuel pump replacement is required, use causal part number 9D376 and labor operation code 9543A. If the root cause is identified as anything other than the fuel injection pump, claim the repair outside of this article.
SSM 545442026-02-12. Service bulletin. Some 2025 Bronco/Ranger vehicles equipped with a 2.7L EcoBoost engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P04DB stored in the powertrain control module (PCM) with no other relevant DTCs present. Refer to Workshop Manual (WSM), Section 303-08B Engine Emission Control > Diagnosis and Testing > Crankcase Ventilation > Pinpoint Test > steps HG1-3 to check for leaks in the positive crankcase ventilation (PCV) and repair as needed. If no leaks are found in the PCV system, this condition may be due to the software in the PCM. This condition does not affect vehicle durability and no additional diagnosis is required for this condition at this time. The replacement of components or reprogramming of modules will not resolve this condition. Clear the DTC and return the vehicle to the customer. Inform customers that they can continue to drive the vehicle and engineering is currently working on a solution for this condition that is expected in Q2 2026. If a vehicle comes in for this condition, submit a Global Concern Report (GCR) and monitor Professional Tech
SSM 544512026-01-07. Service bulletin. Some 2025 Bronco/Ranger vehicles equipped with a 2.3L EcoBoost engine may exhibit an illuminated malfunction indicator lamp (MIL) with only diagnostic trouble codes (DTCs) P0300 and P0316 stored in the powertrain control module (PCM). This condition occurs after initial engine start up following an overnight cold soak or short cold soak (2-3 hours). This condition does not affect vehicle durability and no additional diagnosis is required for this condition at this time. The replacement of components or reprogramming of modules will not resolve this condition. Clear the DTCs and return the vehicle to the customer. Inform customers that they can continue to drive the vehicle and engineering is currently working on a solution for this condition that is expected in Q2 2026. Continue to monitor Professional Technician System (PTS) for additional information and schedule service appointments for customers once the repair becomes available.
25H032025-10-03. Other. Harvest Program 25H03 Certain 2024 - 2025 Model Year Bronco, Bronco Sport, Corsair, Escape, Explorer, Maverick, Mustang, and Ranger Vehicles with 1.5L, 2.0L, or 2.3L Engine Spark Plug Replacemen
25H032025-09-02. Other. Certain 2024 - 2025 Model Year Bronco, Bronco Sport, Corsair, Escape, Explorer, Maverick, Mustang, and Ranger Vehicles with 1.5L, 2.0L, or 2.3L Engine Spark Plug Replacement
25P202025-08-02. Other. Certain 2025 Model Year Bronco, Explorer, Mustang, and Ranger Vehicles Engine Coolant Temperature Sensor Replacement On all affected vehicles, the Engine Coolant Temperature sensor (ECT) may have a poor solder joint internally, causing a Diagnostic Trouble Code (DTC) to set against the sensor for an open circuit and the check engine light to illuminate
SSM 540162025-07-08. Service bulletin. Some 2021-2025 Bronco and 2024-2025 Ranger vehicles equipped with a 2.7L/3.0L EcoBoost engine may require removal of the engine front cover due to various concerns. Workshop Manual, Section 303-01 has been updated with improved engine front cover removal and installation service procedure steps including a new body removal and install step.