WenmarOpen by Wenmar Pro

Service bulletin A23-078

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id11019241
Published by NHTSA2025-06-05
Manufacturer's numberA23-078
Manufacturer's date2025-05-21
NHTSA componentENGINE

NHTSA's summary

Service Bulletin - Torque converters may not have been manufactured to proper specifications. As a result, the torque converter lock-up clutch cannot provide adequate holding force due to pressure bleeding down through a crack in the lock-up piston. The reduced lock-up clutch capacity results in the transmission indicator flashing “D” and set DTC P0741 Torque Converter Clutch Performance or Stuck OFF.

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Engine

Trouble codes named

P0741

Vehicles listed
HONDA PILOT2017, 2018
HONDA RIDGELINE2017, 2018, 2019

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
23V7510002023-11-13. ENGINE AND ENGINE COOLING:ENGINE:HARD PARTS INTERNAL/MECHANICAL
20236032023-11-08. Engine
19V2980002019-04-12. ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:BELTS AND ASSOCIATED PULLEYS
20191792019-04-11. Engine

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
A23-0092025-07-09. Service bulletin. Service Bulletin - Under certain circumstances, after coming to a stop and engaging idle stop, the vehicle may not restart automatically due to excessive cylinder pressure and/or low cranking torque. Typically, the customer can immediately restart the vehicle by selecting Park and pressing the ENGINE START/STOP button.
A23-0782025-06-05. Service bulletin. Service Bulletin - Torque converters may not have been manufactured to proper specifications. As a result, the torque converter lock-up clutch cannot provide adequate holding force due to pressure bleeding down through a crack in the lock-up piston. The reduced lock-up clutch capacity results in the transmission indicator flashing “D” and set DTC P0741 Torque Converter Clutch Performance or Stuck OFF.
A23-0782025-04-29. Service bulletin. Service Bulletin - Torque converters may not have been manufactured to proper specifications. As a result, the lock-up clutch cannot provide adequate holding force due to pressure bleeding down through a crack in the lock-up piston. The reduced lock-up clutch capacity results in the transmission indicator flashing “D” and set the DTC P0741 Torque Converter Clutch Performance or Stuck OFF.
AEBM041820259012025-04-29. Other. Dealer Message - Torque converters may not have been manufactured to proper specifications. As a result, the torque converter lock-up clutch cannot provide adequate holding force due to pressure bleeding down through a crack in the lock-up piston. The reduced lock-up clutch capacity results in the MIL not illuminating. “D” flashes and “Transmission Overheat” message appears setting DTC P0741 Torque Converter Clutch Circuit Performance or Stuck OFF.
A16-0132024-09-10. Service bulletin. Service Bulletin - Drivers may experience a chirping sound coming from the engine area with the engine warmed up due to the high pressure fuel pump is making a chirp.
A24-0852024-07-26. Service bulletin. Service Bulletin - MIL flashes and vehicle will not accelerate, low power. After cycling the ignition, the symptom does not return with no stored DTCs. This issue is more common in regions with cold weather (specifically near or below freezing temperatures). Usually after a long drive (around 2 hours) and accelerating while cornering.
A24-0852024-07-01. Service bulletin. Service Bulletin - The MIL flashes and vehicle will not accelerate, low power. After cycling the ignition, the symptom does not return with no stored DTCs. This issue is more common in regions with cold weather (specifically near or below freezing temperatures). Usually after a long drive (around 2 hours) and accelerating while cornering. Moisture accumulation in the intake manifold during long drives gets drawn into the combustion chamber while cornering, causing misfires.
A24040A2024-05-15. Other. Service NewsDue to On-Board Diagnostic (OBD) regulation change starting with 2019 vehicles, American Honda’s Variable Valve Timing and Lift Electronic Control (VTEC) On-Board Diagnostic monitors are now included in the EGR/VVT OBD Monitor Readiness status group. Due to some customer’s driving patterns, they may not drive in the fashion needed to operate the VTEC (EGR/VVT) that only operates above 5,350 rpm to run the OBD monitoring. Therefore, the EGR/VVT OBD monitor group readiness status is not set to “Complete” when the customer presents their vehicle to a Smog Check station for inspection.
A23-0912023-12-23. Service bulletin. Service Bulletin - Due to variations in the purge control solenoid valve spring, the valve wears unevenly and intermittently sticks. This may result in setting DTC P0441 (Evaporative Emission (EVAP) System Purge Flow Malfunction).
A23-0082023-11-29. Service bulletin. Service Bulletin - Under certain circumstances, after coming to a stop and the idle stop feature engages, the vehicle may not automatically restart. Typically, the customer can immediately restart the vehicle by selecting Park and pushing the ENGINE START/STOP button.