Transport Canada recall 2019179
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | Transport Canada (Canada) |
|---|---|
| Campaign number | 2019179 |
| Manufacturer's number | AL67 & HN93 |
| Reported | 2019-04-11 |
| Component | Engine |
| Notification type | Safety Mfr |
| Units potentially affected | 9834 |
What is wrong
Issue:
On certain vehicles, the teeth on the timing belt may separate due to a manufacturing issue. This could result in an engine stall.
Safety Risk:
An engine stall could increase the risk of a crash.
Corrective Actions:
The company will notify owners by mail and instruct them to take their vehicle to a dealer to inspect the lot number on the timing belt. If it is within the affected range, the belt will be replaced. Additionally, dealers will inspect the engine for internal damage.
| 2018 ACURA MDX | |
|---|---|
| 2019 ACURA MDX | |
| 2019 ACURA TLX | |
| 2019 HONDA ODYSSEY | |
| 2019 HONDA PILOT | |
| 2019 HONDA RIDGELINE |
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| B23-002 | 2025-07-09. Service bulletin. Service Bulletin - Under certain circumstances, after coming to a stop and engaging idle stop the vehicle may not restart automatically due to excessive cylinder pressure and/or low cranking torque. Typically, the client can immediately restart the vehicle by selecting Park and pressing the ENGINE START/STOP button. |
|---|---|
| B22-009 | 2025-07-09. Service bulletin. Service Bulletin - Under certain circumstances, after coming to a stop and engaging idle stop the vehicle may not restart automatically due to excessive cylinder pressure and/or low cranking torque. Typically, the client can immediately restart the vehicle by selecting Park and pressing the ENGINE START/STOP button. |
| A23-009 | 2025-07-09. Service bulletin. Service Bulletin - Under certain circumstances, after coming to a stop and engaging idle stop, the vehicle may not restart automatically due to excessive cylinder pressure and/or low cranking torque. Typically, the customer can immediately restart the vehicle by selecting Park and pressing the ENGINE START/STOP button. |
| A23-078 | 2025-06-05. Service bulletin. Service Bulletin - Torque converters may not have been manufactured to proper specifications. As a result, the torque converter lock-up clutch cannot provide adequate holding force due to pressure bleeding down through a crack in the lock-up piston. The reduced lock-up clutch capacity results in the transmission indicator flashing “D” and set DTC P0741 Torque Converter Clutch Performance or Stuck OFF. |
| A23-078 | 2025-06-05. Service bulletin. Service Bulletin - Torque converters may not have been manufactured to proper specifications. As a result, the torque converter lock-up clutch cannot provide adequate holding force due to pressure bleeding down through a crack in the lock-up piston. The reduced lock-up clutch capacity results in the transmission indicator flashing “D” and set DTC P0741 Torque Converter Clutch Performance or Stuck OFF. |
| A23-078 | 2025-04-29. Service bulletin. Service Bulletin - Torque converters may not have been manufactured to proper specifications. As a result, the lock-up clutch cannot provide adequate holding force due to pressure bleeding down through a crack in the lock-up piston. The reduced lock-up clutch capacity results in the transmission indicator flashing “D” and set the DTC P0741 Torque Converter Clutch Performance or Stuck OFF. |
| AEBM04182025901 | 2025-04-29. Other. Dealer Message - Torque converters may not have been manufactured to proper specifications. As a result, the torque converter lock-up clutch cannot provide adequate holding force due to pressure bleeding down through a crack in the lock-up piston. The reduced lock-up clutch capacity results in the MIL not illuminating. “D” flashes and “Transmission Overheat” message appears setting DTC P0741 Torque Converter Clutch Circuit Performance or Stuck OFF. |
| B24-022 | 2025-03-05. Service bulletin. Service Bulletin - The AWD warning light is on with one or more AWD DTCs having been set due to water intrusion into the electric oil pump motor connector area corrodes the terminals. |
| ONL6AX022025A | 2025-03-05. Other. Owner Notification Letter - Under certain circumstances, after coming to a stop and the idle stop feature engaging, your vehicle may not automatically restart. |
| A24-085 | 2024-07-26. Service bulletin. Service Bulletin - MIL flashes and vehicle will not accelerate, low power. After cycling the ignition, the symptom does not return with no stored DTCs. This issue is more common in regions with cold weather (specifically near or below freezing temperatures). Usually after a long drive (around 2 hours) and accelerating while cornering. |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.